No hay artículos en el carro
No hay artículos en el carroMás información del producto
CONECTOR EN VIVO TODO COBRE NIQUELADO
Todo cobre con acabado niquelado y diseño de doble sellado. Adecuado para tuberías PERT PEXD y otros tubos de calefacción por piso radiante con un diámetro interno de 12 mm y un diámetro externo de 16 mm
Cuerpo de acero inoxidable 304
Hecho de acero inoxidable 304, utilizando tecnología cepillada, forja roja de alta temperatura, fuerte y duradero, no se rompe fácilmente
Válvulas de bola de cierre NPT de 1 pulgada
Pared interior lisa, diámetro del tubo NPT de 1 pulgada, con su propio soporte grueso, instalación fácil y rápida
Medidor de flujo visual
Medidor de flujo visual de alta precisión, siempre presta atención al flujo de agua, calidad estable, seguro de usar
QA
¿El termómetro es Fahrenheit o Celsius? - Solo Celsius. ¿Es adecuado para tubos LED normales de 1,27 cm (1,27 cm). - Adecuado para tubos con diámetro interior de 12 mm y diámetro exterior de 16 mm. ¿Cuál es el tamaño de rosca de la válvula de bola? -Rosca de 1 pulgada g para un extremo del colector y rosca npt de 1 pulgada para el otro extremo. ¿Puedo comprar un adaptador de 5/16 pulgadas para montar un colector o un accesorio de 1/2 x 5/16 pulgadas? - No, debe ser de 1/2 pulgadas. ¿Cuál es el tamaño de rosca de la válvula de bola? -Rosca de 1 pulgada g para un extremo del colector y rosca npt de 1 pulgada para el otro extremo actuador de calor eléctrico M30* 1.5
Kayla Herrick
Comentado en los Estados Unidos el 29 de febrero de 2024
easy install
Danny
Comentado en los Estados Unidos el 13 de enero de 2024
We used this to heat a small 350 sq ft area with two zones. Was easy to integrate with other off the shelf items to complete the setup. The manifold felt hefty and well made. No issues when installing and is doing exactly what it was designed to do for the past month or so.
Always something to do
Comentado en los Estados Unidos el 26 de diciembre de 2023
Final verdict first, this is a good quality manifold for the price that tested well. 4.4 stars.All threads are perfect.I like that this set includes isolation valves!All of the valves open and close smoothly but are also obviously tight, they all seal well.Connectors hold tight and well sealed. A tiny bit of silicone spray might help to not damage o-rings upon insertion.The plastic parts and temp gauges could be thicker and more durable, but are still very good and work perfectly well.The u-shaped hangers could also be a little more heavy and durable, but they also work perfectly well.All components work perfectly and flow adjustments are easy to set.Make sure that you or your installer knows what they are doing in order to properly prime the manifold to expel any air out of the system.I’m using this 2 loop manifold to retrofit a non-heated walkout basement.Final thought: I would order another one if I expand this hydronic system or if I install another one.
MJ
Comentado en los Estados Unidos el 18 de diciembre de 2023
This is a fair amount more control over the water flow than a simple manifold. There are flow meters showing how much water is flowing into each loop of a zone - the more loops in a zone, the more flow meters to mess with. The flow through each loop can be balanced to match the other loops, creating even heating throughout an entire zone. This balancing is achieved on either the inlet valve to a loop, or the outlet valve, or both. This makes for a highly configurable manifold that has the ability to be adjusted for various parameters as desired.This particular unit has flow measurements in liters per minute. The inlet and outlet temperature gauges are in degrees celsius as well. Not a big deal to do a conversion and adjust to the metric numbers.This manifold comes with everything pictured. Ball valves, air bleeders, drain connections, mounting brackets - it's all there... All components have quality machining, and appear to be made to last a while without a lot of maintenance required.As for pricing, this manifold is comparable to other units from Chinese manufacturers on Amazon, but is a fair amount less than units from plumbing supply shops. My guess is it has to do with where it's been manufactured, and the labor costs involved.This manifold isn't going to get installed until summer/fall of 2024, so no actual in-use data until then. From all appearances, I'm not expecting to have any issues.
Customer Review
Comentado en los Estados Unidos el 17 de diciembre de 2023
This is intended for heated floor install. You can of course use it for whatever you want, but that's the intent.It's so much better than the simplistic copper manifolds I've used before...and really not that much more expensive. So many thoughtful features! It's got great features that make install easy, and make it easy for the homeowner to monitor things.For the homeowner, you've got a visual flowmeter on each port, and also a visual temperature gauge. And when I say visual, they're actually large enough to easily see and read from the floor, without a ladder, flashlight, or microscope lol.For the installer, you've got very clear instructions, 1/2 adapters (if needed), and mounting hardware. It's also all stainless and brass, which not only gives a nice polished appearance, but you don't have to worry about electrolysis or dielectric unions (as you do with copper).I've never heard of this brand before, seems like they're mostly about laser engravers. But I'm pretty impressed.
Productos recomendados
Mex $500.62
Mex $ 230 .00 Mex $230.00
Mex $146.86
Mex $ 85 .00 Mex $85.00