No hay artículos en el carro
No hay artículos en el carroMás información del producto
Acerca de FastCap
FastCap fue fundada en 1997 por Paul Akers, un veterano en la industria de fabricación de gabinetes/carpintería durante más de 20 años. Un día, mientras Paul estaba construyendo algunos armarios, tuvo una idea para una tapa de rosca autoadhesiva y nació el Fastcap. En los últimos cinco años, FastCap ha crecido exponencialmente y ha ampliado su base de productos desde Fastcap a una amplia gama de productos y herramientas para trabajar la madera para adaptarse a las necesidades profesionales del fabricante de gabinetes y carpintería.
Adam
Comentado en los Estados Unidos el 2 de marzo de 2024
have been woodworking for about 50 years, that said I have gone through a number of table saws and stick on tape measures in that time. This one considering the readability of the numbers, the fact that every 1/8" has the fraction and each 1/16 is numbered is fantastic, very handy. It also has all the metric scale on it as well for those plans.Readability - black on yellow is OK and does contrast pretty good, but those tapes have thicker lines. This is Black on White with very thin lines - a knife cut is about the same thickness. way better on accuracy when trying to make a critical cut.install - I admit i was skeptical because the double-sided tape was separate from the metal measure tape but; except for my goofing up the first install it went well enough.the double-sided tape - this stuff is weird - when you first put it down you can peel it back up, provided you do it in the first 5 - 10 minutes... If you wait longer than that, man you will have a mess on your hands as it will NOT come off. I have no idea if its oxy activated or pressure or what but it really holds the tape down.I initially installed the tape on the wrong side of my fence and had to reposition it, which is how i know about the easy to remove in the first few minutes. for an experiment I stuck an unused part of the tape to a piece of metal that had been painted at the same time in the same way as my fence and left it while I ate lunch. couldn't get the adhesive off without chemicals, the metal tape bit took a scraper to get under it. I have no doubt the original tape will hold onto my table saw until the numbers wear off, years from now.I have no reservations recommending this stick-down tape to anyone. Just prep your surface first...
Dave C
Comentado en el Reino Unido el 1 de febrero de 2024
This tape feels like an actual aluminium measuring tape. The adhesive tape included is good quality and slightly thinner. I routed a very shallow channel the thickness of the tape and it all sat in perfectly. Have it flush to my work surface now and it has really enhanced my new setup. Highly recommended.
PimpinCrispy
Comentado en Canadá el 2 de octubre de 2024
This is a great quality tape. It is easy to read with the fractions of an inch. I can read a tape measure however this leaves less margin for error.
Spud
Comentado en los Estados Unidos el 17 de abril de 2024
Purchased to use for a workshop workbench. I liked that this has the fractions printed on the tape. I refurbished a couple of old 1970's heavy steel workbenches and decided to add a table top measuring tape. One table top is 60 inches and the other is 72. I bought this thinking I'd try it out for the 60 inch top, and buy another one later for the 72. The cool thing is, the tape is printed on both sides and has opposing starting points on each. This means that I can cut the tape from 0 - 60" and flip the remainder over and get another 0 - 72" (with left over) for the second table. No need to buy twice. The item comes with a separate roll of double sided tape which makes installation very easy. Position the sticky tape first and then apply the measuring tape. The measuing tape is durable metal and peals off the sticky tape easily enough to reposition. Once down where it needed to be it stuck quite well. A couple of coats of clear coat and you would think it was part of the table. As far as I am concerned, this is a great product.
James Richard
Comentado en Canadá el 15 de septiembre de 2022
So glad I didn't go for the cheaper alternatives. This is double sided and reads from opposite ends. I was able to use 5' for my table saw, the rest will be used on my miter station. Super quality and accurate.
VICENTE MANUEL GARRIDO MEZA
Comentado en México el 18 de enero de 2020
LA MEJOR CINTA METRICA AUTO ADHERIBLE, LO MEJOR DE LO MEJOR
Productos recomendados
Mex $1,545.72
Mex $ 711 .00 Mex $711.00
Mex $169.00
Mex $ 101 .00 Mex $101.00
Mex $299.52
Mex $ 158 .00 Mex $158.00