Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Festool 574432 Domino - Set Carpintero, modelo DF 500 Q

Envío gratis en pedidos superiores a Mex $600.00

Mex $36,574.53

Mex $ 1,881 .00 Mex $1,881.00

En stock

Acerca de este artículo

  • Acción de corte única y patentada que gira y oscila para crear hendiduras, perfectas, limpias, y repetibles en cada ocasión.
  • El ajuste del ancho de la hendidura con solo el giro de un disco, permite una alineación más fácil cuando se unen los paneles.
  • El pivote de la valla te permite crear hendiduras biseladas en ángulos de 0°-90° con paradas positivas a 22,5 °, 45 °, 67,5 °.
  • Pasadores de indexación para la rápida alineación del borde de la pieza de trabajo y una colocación precisa.
  • El diseño de extracción de polvo proporciona agujeros limpios para una mejor adherencia del pegamento y una vida más larga del corte.



Más información del producto

carpintero de domino festool

Revolucionando la carpintería y repensando la carpintería

La unión siempre ha sido un proceso lento y difícil. El Festool Domino corta la grasa de la carpintería para permitir que los artesanos hagan articulaciones más fuertes, más rápidas y fáciles. El carpintero Domino, con su revolucionario método de corte, crea mortajas que aceptan espigas de haya y sipo (llamadas Dominos). El proceso es rápido, fácil y preciso.

La herramienta única permite un trabajo altamente repetible, mejorando significativamente tu eficiencia y permitiéndote hacer más trabajo en menos tiempo.

Características clave

control de profundidad de espiga de carpintería

Control de profundidad

Ajuste rápido y preciso para cinco profundidades de mortaja diferentes, en relación con el tamaño de la espiga requerida para la aplicación.

Valla giratoria para mortajas en ángulo

La valla crea mortajas en ángulo de 0 a 90 grados con topes positivos a 22.5 grados, 45 grados, 67.5 grados.

carpintería mortaja espiga ancho profundidad

Ajuste de ancho de mortaja

Ajustar el ancho de la mortaja permite una alineación más fácil al unir paneles.

Principio de enrutamiento patentado

El cortador en espiral gira y oscila para crear embutidos perfectos.

Sistema de carpintería Festool

¿Por qué el Domino?

Trabajo más rápido y repetible

El Domino agiliza un proceso tedioso, lo que te permite hacer más trabajo en menos tiempo.

Precisión y precisión

Elimina las conjeturas de tu carpintería. El Domino de ingeniería alemana se asegura de que cada corte de mortaja es el correcto.

Versátil para cualquier proyecto

El Domino es una herramienta compleja que se puede utilizar fácilmente para una amplia variedad de proyectos. Ajusta tus profundidades y ángulos para las necesidades de cada proyecto.

Especificaciones:

  • Velocidad del husillo del cortador: 24.300 rpm
  • Diámetro del cortador de ranura Domino: 5/6/8/10 mm
  • Consumo de energía: 420 W
  • Parada de profundidad de enrutamiento: 12/15/20/25/28 mm
  • Peso: 7 libras. (7 libras)

El sistema Festool

Por qué importa el polvo:

Los beneficios de la extracción de polvo

  • Menos tiempo de limpieza en lugares de trabajo
  • Respira menos toxinas peligrosas
  • Mantén tu lugar de trabajo limpio y feliz a tu cliente

El sistema Festool

¿Por qué elegir Festool?

Los emparejamientos y posibilidades son infinitas. Pero aquí tienes solo un ejemplo de comenzar de forma inteligente y obtener niveles aún mayores de eficiencia a medida que avanza. Con cada nueva pieza construida en tu sistema Festool, aumentarás la velocidad y la productividad de tu trabajo. Mejor aún, aumenta la precisión aportada a tus proyectos. Porque eso es lo que te distingue como un artesano intransigente. Más allá de simplemente trabajar mejor juntos, nuestros productos están diseñados, fabricados y calibrados para operar en sincronía, lo que resulta en el rendimiento que demandas y mereces.

  • Extracción de polvo
  • Portátil para un fácil uso y almacenamiento
  • Precisión y rendimiento inigualables

Duhkgeorge
Comentado en los Estados Unidos el 28 de noviembre de 2024
This is not as brainless as one might hope. Its important to pay attention to how you use it (push in the back at cord and hold straight/flush, check that its lined up before each plunge) but it is relatively fast and if marking the lines, very easy. I use auto spacer, but i sometimes run into issues. Lining up dash marks is faster with less double checking required.Do i regret small versus large? The smallest setting (4mm) is extremely problematic to be almost worthless. 5 and 6mm are my goto for most projects with counter tops and this goes up to 10mm which works on all my projects. Small was definitely the right size as I’m primarily working with 1/2”-3/4” material up to 2”.I needed the small adapter for my Festool dust extractor as Festool has two different hose sizes and I went large.I went oversize on my holes. I found that attempting to have too tight of a tolerance just lead to headaches. I always regretted too tight and never too loose. Of note, switching the hole width requires the machine to be on else to risk damage. This should be reflected in big flashing letters. Think about switching gears on a bike while not moving. When it moves, bad things can happen. I put painters tape on the switch to remind me and thankfully it didn’t bite me the one or two times I did it before reading.Unlike some other Festool products I have zero complaints. Drill bit switching is easy and I enjoy working with this tool. The big complaint is price, but it’s first to market and well thought out and well designed. When the patent expires, definitely check out other brands. Until then live with pocket screws, biscuits, or dowels unless you’re okay with this price.
Gavin Daigle
Comentado en los Estados Unidos el 16 de junio de 2021
Updating to 5 starsI’m still not happy about the condition of the tool when I received it but after using it a few times I feel like it deserves a 5 star review. It’s expensive but the build quality, design and functionality of this tool is AMAZING. This has become my new favorite tool and if you can afford one I would highly recommend buying one. You really have to use it to fully appreciate what it is. I have absolutely no regrets about buying it and after using it, I couldn’t imagine not having it. Also, the dust collection on this thing is far better than any other tool I own. I always wear a respirator when working in the shop but don’t feel the need to when using this tool. There is literally no sawdust escaping this thing.Original Review:This is one awesome tool but mine looks like it was already used. The body of the tool and handle on the fence are a little scuffed up. It’s true that this slight cosmetic damage could have occurred during shipping but the cutter also had sawdust on it right out of the box. I would recommend buying locally if possible.
Jarrett Anderson
Comentado en Canadá el 7 de abril de 2019
Everything was great! Not a single thing to complain about. I use it for my table leg and tabletop joinery.
Wojciech T.
Comentado en Canadá el 14 de diciembre de 2018
My first Festool piece and I must say that now I understand what is that hype all about. The quality is outstanding, the engineering is marvellous. Dust collection is perfect even with the 3rd party DC unit and hose. The most important part, the unit does its job perfectly.
Matthew S
Comentado en los Estados Unidos el 11 de junio de 2016
This is one incredibly useful, excellent piece of equipment. It does something that no other tool maker has attempted, and Festool aced it.There are many ways to make two pieces of wood stay together, and with $50 worth of hand tools and incredibly perfect technique, you can definitely do without this tool. I bought it because it allows me to be highly accurate, extremely fast, and almost entirely eliminated ruining workpieces and having to spend extra money on more material to start over with parts of projects. I can assemble a project in 1-2 hours with the Domino that would have required I spend 20-30 hours with a mixture of hand tools and power tools to accomplish.The other thing this saves me is a huge amount of garage space. No need for me to own a bunch of tenon cutting jigs/sleds or a stand mortiser and a plunge router setup just for cutting mortises. I like that a lot.Pros:Saves timeSuper accurateAvoids ruining workpiecesHelps me save shop space on all of the tools I'd need to use to reproduce the functionality this hasCons:Cost enough to cause marital heartburn
Productos recomendados

Mex $6,186.48

Mex $ 1,881 .00 Mex $1,881.00

4.5
Elegir

Mex $612.35

Mex $ 293 .00 Mex $293.00

4.3
Elegir

Mex $2,469.14

Mex $ 1,012 .00 Mex $1,012.00

4.3
Elegir

Mex $3,242.98

Mex $ 1,459 .00 Mex $1,459.00

5.0
Elegir

Mex $977.45

Mex $ 488 .00 Mex $488.00

4.9
Elegir

Mex $1,975.74

Mex $ 849 .00 Mex $849.00

5.0
Elegir