No hay artículos en el carro
No hay artículos en el carroGive your pet the extra heat it needs. Fluker's Heat Mat's durable construction provides uniform, evenly distributed heat. Easy to use and safe for all reptiles and amphibians. For use outside your pet's enclosure. Can be mounted under or on side of your pet's enclosure. **If mounted below enclosure, make sure there is only a thin layer of substrate in tank and there is proper ventilation to prevent heat buildup which can damage your enclosure or create a fire hazard. Side mounting is recommended for enclosures with no bottom ventiliation and/or thick or heavy substrate.**
Miranda Oliver
Comentado en Canadá el 11 de febrero de 2021
Ordered this product after I learned it one of the two that can be insulated and not be a fire hazard, so you can put blankets over top and such for more heat.Immediately unwrapping this, It looked tiny. I measured it is not 11x11.The measurements for it are : 10x10, as most of it is just plastic and not the actual heating pad.The heating pad is a low setting, it does not get very hot.You can only feel the heat when your hand is right up against it, or an inch away.When putting your thermometer it made it go from 23*C to 24*C .. ( I keep the room hot )Where as a heat lamp it made it go almost 6-10* up, but brought down the humidity so trying this...Obviously for my 75 gallon tank I didn't expect it to heat it much, and I would need a bigger sizeof heating pad or 10 of these medium sizes to cover the tank fully. Just wanted to purchase to experiment.If you had a 30 gallon tank you would need 2-3 of these for sure.Not that I don't like it, just need to try the bigger size that hopefully will produce more heat.
Sofía
Comentado en México el 20 de enero de 2021
Es muy poco el calor que emite, diferente a lo que indica la publicación
francisco melendez
Comentado en México el 15 de enero de 2021
Funciona perfecto, llevo ya usándolo ya varios meses y sigue calentando mi terrario día y noche
Rodrigo
Comentado en México el 4 de marzo de 2020
bueno
eddiemaiden
Comentado en el Reino Unido el 20 de noviembre de 2020
All good
Gives_amen
Comentado en los Estados Unidos el 17 de marzo de 2018
has worked great so far. But if you are someone that needs a specific temperature range consistently...then definitely buy a thermostat to go with it and also a infrared thermometer bc this on its own may get too hot for your animal. I have a leopard gecko which needs a certain surface temp range on one end of the cage and this alone would cause the temperature to exceed what I needed .so I have this connected to a digital thermostat (jumpstart thermostat) to be able to control the temperature. And I say to buy a infrared thermometer...to double check things. Bc At first I set the thermostat to 90 degrees. Once the thermostat showed it had reached 90...i double checked surface temp with a infrared thermometer to make sure things were accurate. Upon checking..... the surface of the glass directly was also at 90 degrees .(my heating mat is placed on the underside of the bottom of the glass tank ). But the surface temp of my reptile carpet that's over top the area I have this heating mat....was not reaching 90 degrees. It was several degrees cooler below the range I needed. So it seems this mat is really only heating the surface temp of the glass itself to ideal temp...but not actually penetrating the carpet enough to heat the surface temp of. The carpet to ideal temp. And the carpet temp surface is what matters in my case. So I had to end up adjusting my thermostat higher.
Edgar
Comentado en México el 16 de noviembre de 2018
Calienta muy bien pero tengan cuidado por que el calor se acomula
Marque
Comentado en Canadá el 10 de abril de 2017
After having to replace far too many failed and burnt-out ZooMed UTHs, I've been using this heat mat for my ball python (Alongside a JumpStart Thermostat) for my Ball Python for around a year now. It's still going strong with no signs of wear!
coluber
Comentado en los Estados Unidos el 8 de enero de 2013
I built a cage from 3/8" birch plywood. The ambient room temperature is a bit cool in the winter for my california kingsnake, so I placed the heat mat underneath the cage, and it covers about half the cage floor. Though the the manufacturer recommends against placing the mat underneath a wooden cage, it seems to work well; perhaps it wouldn't on thicker wood. This heat mat doesn't have adhesive on the surface, which differs from other brands, but I prefer this arrangement. The cage is set on 2 x 4s edgewise, and the edges of the pad are supported by the 2 x 4s. Using a spacer, or not, you can adjust the proximity of the mat to the bottom surface of the cage--flush against the cage would be warmer and with spacers it would be cooler. I have ordered a dimmer switch to adjust the temperature, but this may not be necessary.I am well pleased with this heat mat, and the shipping time was amazingly quick--2 days with regular shipping!When using a heat mat for reptiles, it's necessary to provide a gradient of heat-cool in the cage so the animal can move about and thermoregulate. In my cage I have a shelf added for two levels. The snake can spend time on the upper level retreat or in the rock cave on the lower, heated level.
Productos recomendados
Mex $602.33
Mex $ 307 .00 Mex $307.00
Mex $501.87
Mex $ 250 .00 Mex $250.00