This is a clever, compact design of medium build quality and represents a very good value. Setup and take down is very quick and straight forward. The collapsed footprint is deceivingly small considering it's capacity, resulting in a light and portable saw stand. The erected height is ideal for miter saw work. It easily accommodates both my 10" and 12" Dewalt saws. Extension arms are adequate, but not exceptional and sag under the weight of 4x4 PT posts. For around 40 bucks, you can purchase a spare set of mounting brackets to use the stand with different tools.Unfortunately, I had to re-tap 3 of the threaded female fittings as they weren't machined cleanly coming out of the factory. Not a huge deal, but disappointing.Overall I'd buy it again, but make sure you complete the assembly before bringing it on site.

Es muy útil y fácil de usar al montar una sierra de inglete además de muy estable.

Easy to assemble, very good quality, really recommend, very good value for money, thanks

Uno de los dos montajes de fijación rápida que sirven para sujetar la sierra (No. de parte 3042) llegó sin una de las patas de plástico/hule. No venía suelta dentro del empaque. No hay huellas de maltrato durante el emvío. No hay rastros de que le hubieran instalado la pata ya que va unida mediante remache (rivet).En general el soporte luce bien y parece firme.Espero el proveedor me mande la pata faltante para instalársela. O mejor, 4 patas con tornillo para reparar el banco en lugar de regresarlo. Es algo que puedo hacer y creo es importante para poder apoyar la sierra cuando la remueves del banco con los montajes de fijación rápida puestos.

Muy solida buena relación calidad precio

I didn't think i needed a stand for my little 8 inch miter saw !!! Man was I wrong. After a little bolt adjustment, the saw being on the smaller side, fits the mounts. A bonus... you can still use the saw without taking it off the mounts. The mounts with their rubber feet give your saw a wider and more stable foot print . Well made, solid, great price, easy to use and carry. Installing and removing the saw from the stand is easy. If your looking for a stand... this is the one

Le quedo magnetica a mi cortadora de metal

Buena calidad, facil armar y usar.Lo he usado para diversos cortes con un mitersaw Hitachi 10" en casa, ningun problema.Solo faltan "stop blocks", que por ahora tengo que resolver con inventos propios.

mi miter saw DeWalt DW714 se sujeta perfectamente!

Muy fácil de instalar y de excelente materiales muy recomendada

Excelente, se puede quitar y poner la sierra de inglete sin perder tiempo y sin necesidad de usar herramientas, se dobla fácilmente para transportarse y es muy resistente.

I've been looking for a cheap, sturdy, no frills miter saw stand for a month or so. I finally pulled the trigger on this Bora after I got tired of my DeWalt DW-780 miter saw sitting on the floor all the time. I can now store my shop vac and some other stuff underneath this and reclaim a little space.Overall, after unboxing and minor assembly, the quality of this seems above-average for what I would expect at this price point. Okay, so I would have liked wheels, but I'd rather decent quality and pay less and add my own wheels later, so this suits me well. Small niggles - the paint is reasonably thin, and once you install your saw, tightening the screws down will probably scrape through the paint. I also imagine it will chip off with time if moved frequently. However, the general sturdiness and function is decent, so I'm not going to complain. Also, one of the support arms doesn't quite fit into the main rail it is stored in. I'm fairly sure if I get a rasp and file the swarf or solder spatter off the inside of the tube, it will slide in like the first one did. Also, before installing the saw, the legs weren't quite all flat on the floor. With the weight of the saw on top of this all evened out. I may yet make some screw-out leveling leveling feet to fit inside the tube legs, but that's a project for another day.Things I like:- Price- Sturdines- the way the legs swing out for a larger footprint when down, yet come back up in line with the thinner saw mounting rails.- The support arms are almost un-noticeable once stowed yet give you a good six-ish extra feet of wingspan to support whatever you are cutting. Really useful when working on your own- The mounting hardware includes three different lengths of bolts to accommodate different thicknesses of miter saw bed.- Instructions are clear, and printed in well written English. With pictures.The first time I fitted the saw to the mounting rails, I mounted the saw too far forward, and had to loosen all the bolts and slide it backwards. There is some tomfoolery involved in getting the bolts clear of the clips and handles underneath. Or least, there is when you use the upside down. I didn't cotton onto the square shoulder underneath the head to begin with. It was only after my second fitting of the saw, I looked at the instructions and realized they needed to be the other way up such that the square shoulder lined up with the square cutout in the mounting rails. *Sigh*. Having written this review, I can now go and remove them all, and reinstall them the correct way up. If I'd done it the right way the first time I also wouldn't have needed to cut one down with the grinder. Hopefully this will save someone else from making the same mistake!Overall, I think this is a good buy for the price. Maybe when I get a proper shop I will graduate to a fancier setup with built in dust collection, but for my current apartment setup, this will suffice.

I needed a stand for my 12" CS Miter saw. I am a homeowner/ DIYer so it isn't going to be getting use on a daily basis or on a job site.With that being said, I have been contemplating buying this stand for a few weeks now and when amazon dropped the price I pulled the trigger (under $65), for that price I didn't really expect much out of this stand. First impression was with the package, obviously. It came in its own packaging as amazon did not bother to place it in one of its own boxes, so I was a little worried when I was going to open it, as one side of the package was slightly open. To my surprise there was no damage and all the parts were present and intact.Unpacking the stand took a few seconds and the base and legs are already put together and just need to be opened and placed in the opened and locked position. This is done by a swinging the legs outward and by a self locking/retracting pin, very easy to do. (One other reviewer did mention that when closing the stand the legs have to be closed in the same order they are opened, good tip he said was label them which two go first).The directions given are the not best written but the rest of the pieces are pretty self explanatory to put together. It comes with the end extension bars which are not rollers just round lightweight aluminum. The only part that took a little extra time was mounting it to the support arms and locking it in place. It does come with bolts to mount the saw to the mounting arms and it gives a few set ups, each set up being a different bolt length. It also comes with small displacement mounting bars for saws that have unusual mounting holes, (mines didn't, but I did read that some people did use this feature).To adjust the supports arms outward or up and down it comes with plastic knobs that are screwed into the stand to loosen or tighten the support arms to adjust them according to each use. I don't know how long those will last as I dropped one on initial install, it was fine but I don't think it can take too many of those drops before it would break or crack.Once I had the saw mounted to the support arms, I moved the saw over to the stand and locked it in place and I have to say it was pretty tight and sturdy on there. I also have to mention the legs do have grommets on the bottom of the them that are made to level the stand and are pitched on an angle to add to the support of the legs/base.I will most likely leave the saw mounted on the stand as I have enough room in my garage to allocate for this, so it will not be getting that much movement unless I am working outside, but I don't think it will be a problem as the stand is relatively light weight and the saw can be transported as shown in the pictures with the mounting bars.I did get to use it this past weekend for a work bench I am building and the stand performed very well. I cut 2x4x8', 4x4x8' and 2x10x10', each cut I adjusted the supports to what I needed and they performed great. They did sag a little bit when fully extended but not to the point that it affected performance of the cut and also all you have to do is adjust the height of the end supports and problem solved. Height of the stand for me was right on (I am about 6' tall) and made each cut relatively easy.For me the stand performed well above my expectations. As others have stated if you need it for everyday use on a job-site or will give it very heavy use, I also do not think it will last that long. but if you're a homeowner or DIYer do not hesitate to pick this up you will not be disappointed. I will update my review later on to see how it lasts for the long haul or for the use I will need it for.