No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Ventilador de 80 x 80 x 25 mm
Enfriamiento de tu dispositivo
GDSTIME ofrece una amplia selección de ventiladores para satisfacer todas tus necesidades de refrigeración, incluye ventiladores de CA y CC, ventiladores EC, ventiladores de soplador, ventiladores PWM.
Nuestros ventiladores vienen en una variedad de tamaños, estilos y voltajes. y proporcionamos ventiladores de refrigeración CC de cualquier tamaño que puedas necesitar, de 25 mm a 200 mm.
Especificaciones del producto:
Dimensiones totales: 8 x 8 x 2,5 cm. (80 x 80 x 25 mm)
Distancia de agujero a agujero: 2.8 x 2.8 pulgadas. (71,5 x 71,5 mm)
Longitud del cable de alimentación: 11.8 pulgadas. (300 mm)
Flujo de aire total: 43.6 CFM. Nivel de ruido: 31 dBA
Velocidad: 2800 rpm. Voltaje nominal: 24 V
Potencia: 2,1 W. Corriente nominal: 0,1 A
Presión estática: 0.31 mm-H2O
Rodamientos de ventilador: Manga | Esperanza de vida: 35.000 horas
- Voltaje de funcionamiento: 14 a 26 V CC
- Aprobaciones de calidad del ventilador CE, RoHS
Características clave
Fama mejorada de los fans
Estructura de marco mejorada, reduciendo el ruido de flujo turbulento aumenta la eficiencia. El impulsor de plástico PBT cumple con los estándares de inflamabilidad UL 94.
Estructura de rodamiento sellada
Utilizando bobina de cobre puro de alta calidad, resistencia a altas temperaturas, bajo consumo y ahorro de energía, rodamientos de manga con bajo ruido, y se puede funcionar continuamente durante 35.000 horas.
Protección completa
La parrilla de metal del ventilador puede proteger tus dedos de lesiones y evitar que el cable del ventilador se involucre en las aspas del ventilador.
Conector de 2 pines
Asegúrate de que los postes positivos "+"(cable rojo) y negativos "-" (cable negro) estén en los lugares correctos; cambia los cables rojos y negros en el conector si su posición es diferente de tu viejo ventilador.
Erica B
Comentado en los Estados Unidos el 30 de enero de 2025
worked as it should
L T Harris
Comentado en los Estados Unidos el 16 de octubre de 2024
Like my Sovol 6 Plus printer but it had a power supply fan that was extremely loud. Let just say this was a great quality of life improvement.
Norman karino
Comentado en los Estados Unidos el 3 de julio de 2023
Still working good
RBeam
Comentado en los Estados Unidos el 5 de marzo de 2021
I've bought several used SMX APC UPS units for a project. One, that otherwise functions perfectly, was manufactured in 2010. This was the only one in the bunch that couldn't be upgraded to the most current firmware so I don't know if it's that or a faulty sensor but both fans spin at a pretty high speed all the time and really too loud to make it useable even in the out of the way spot I have it located.First bought a pair of fans and didn't read the product description closely enough (my bad). Fans weren't meant to operate 24 hours a day so bought two of these.Came with nuts/bolts long enough to mount for my use (other fans didn't) so installed them with some material between the fans and the device to reduce potential vibration noise.Now this UPS is the quiet one of the bunch. Yes, in this one they are always on but really not audible from more than a few feet away (others spin up intermittently and you can hear those from a distance). I've had the unit in use for a week or so since the install and seems to produce plenty of air flow (based on what I feel coming out the back), battery pack temps the same as the other units and just doing basic checks of running my hands across the case of the unit seems to be right around the ambient temperature in the room.Will update if there are any durability issues but so far so good!
DJ
Comentado en los Estados Unidos el 5 de febrero de 2021
I've got a QSC GX5 amplifier I use for my home stereo. It has a stock cooling fan that runs whenever the amp is on, and its decibel level at its lowest speed exceeds 35 decibels. The stock fan could be heard anywhere in the room, which was very distracting when music was not being played or was being played at a low volume. I had heard of many people performing modifications to the amp, installing a lower volume, lower speed fan to keep the noise down. I ordered the GDSTime fan to perform that kind of a modification. Its decibel levels are in the mid-20's range and was the same size as the 24 Volt fan I pulled out of the GX5. Connect was easy. I just cut the connector off of the GDSTime fan and spliced it into the wires from the GX5. Fan volume was drastically reduced, so much so that unless I am right next to the amp, I can't hear it. A wonderful improvement! It still cools the amp just fine, just at a much lower decibel level, which is awesome.
Productos recomendados
Mex $361.39
Mex $ 187 .00 Mex $187.00
Mex $310.00
Mex $ 164 .00 Mex $164.00