No hay artículos en el carro
No hay artículos en el carroThe XGA Series of power amplifiers from Gemini offer clean, reliable power to heighten the crowd's experience, leaving them with the unforgettable memory of your performance. Receive pure, consistent wattage night after night for the lifetime of the amplifier. The performance of this amplifier is highlighted by the 5000 watts of Instant Peak Power, making it an ideal solution for powering PA systems and DJ rigs. The XGA-5000 also features a frequency response of 10Hz-50kHz at 1.5dB, total harmonic distortion of less than 0.1%, and input sensitivity and impedance of 0.77v for the ultimate premium performance capabilities. For a full-range of connecting opportunities, the XGA family hosts XLR and ¼-inch balanced inputs with three SpeakOn outputs. The XGA unit also includes front panel indicators for Signal, Clip, Protect and Bridge keep your unit properly protected and connected. A front-to-rear airflow and cooling fan provides thermal stability and reliability, and the constant speed of the fan provides a low level of unwanted noise. Level controls for channels 1 and 2, DC Output protection and Short Circuit protection give you the ultimate preventability for misuse and seamless results. Selectable modes for Stereo and Mono Bridge give you even more flexibility, while its sleek, lightweight design ensures total portability. The XGA-5000 unit measures 19"L x 13.8"W x 3.5"H to perfectly fit any DJ equipment collection. At Gemini, our goal is to design products that offer value and innovation in the DJ and Pro Audio markets. Since 1974, we’ve evolved and thrived by understanding the needs of our customers and recognizing industry trends. From our humble beginnings, we understood the potential of the DJ movement, and our ability to support this movement not only helped us grow as a company, it helped DJs gain recognition and esteem, calling deserved attention to their roles as artists and performers. Specifications: Frequency Response 10Hz ~ 50kHz ±1.5dB Signal to Noise (LF / HF) >90dB THD (LF / HF) > 0.1% Input Sensitivity 0.77v Maximum Input Level 21dBv/9v Damping Factor (F=1kHz 8Ω) >350 Input Impedance 20K Ω Fuse 5mm x 20mm AC 115v/230v 50~60Hz Output Stereo 8 Ω 2 x 400W RMS Output Stereo 4 Ω 2 x 550W RMS Output Bridged 8 Ω 1100W RMS Dimensions (WxDxH) 19” x 13.8” x 3.5” (482mm x 350mm x 88mm) Net Weight 26.8 lbs. (12.1 kg)
Jorge
Comentado en México el 13 de febrero de 2025
El amplificador esta muy bueno tiene la potencia que necesito para conectar unas bocinas
Jorge Alberto Flores Hidalgo
Comentado en México el 12 de enero de 2025
No funciona adecuada mente suena por un rato y después suena muy mal se baja el volumen y suena como bocina descontada
Antonio fitch
Comentado en México el 21 de junio de 2024
Lo probé a 4 Homs con bocinas krack de 12" de 400w y 200w rms se oye MUI claro y fuerte lo usaré para medios ...la voz con el micrófono también se escucha vastante bien ...no se calienta ....lo que me gustó más...
Ovidio Flores Martínez
Comentado en México el 25 de marzo de 2024
Me funcionó muy bien,para mi conjunto de bocinas y graves, me pareció muy buen producto
Victor Manuel Guzmán
Comentado en México el 16 de noviembre de 2024
Lo único que no me agrado mucho es que es un poco ruidoso por los 2 ventiladores que traepero es entendible porque es un aparato de potencia! XGA-3000
alberto
Comentado en México el 21 de octubre de 2024
En verdad suena bastante bien , muy liguero y de buena Calidad.
Luigi
Comentado en Italia el 30 de enero de 2024
Potenza Qualità Prezzo
George
Comentado en Alemania el 15 de septiembre de 2024
Die kam schon defekt an hatte sie angeschlossen nichts keine Reaktion Schrauben köpfe fehlen als wenn die beim anschrauben abgerissen sind so an sich optisch heile aber kein Ton kein Strom nichts bin enttäuscht
Max
Comentado en México el 8 de noviembre de 2023
El amplificador solo es para conectar un par de bocinas no se pueden conectar microfonos y los ventiladores que enfrian el amplificador hacen mucho ruido, La potencia no fue lo que yo esperaba. las tuebe que regresar poruqe me decepciono el producto
PassVoksen
Comentado en Alemania el 1 de marzo de 2019
The official pictures show the boreholes in a position, with that the device can be mounted to a 19'' rack.The device we got has the holes in another position (see picture, the cover has the holes in the right position,the ampifier not). So it cannot be mounted to a 19'' rack without using three levels and drilling another hole.
philip fortune
Comentado en el Reino Unido el 1 de noviembre de 2019
The protect light is on red not happy with this Amp also a humming noise when the fan is on 🤔🤔
BL of 'FBCC'
Comentado en los Estados Unidos el 17 de abril de 2011
Hi I'm Kman,When I first purchase the XGA-3000 I did a lot of research on the different lines of lower priced power amps. I am just starting my first mobile karaoke business and learned the right amp can be crucial to my set up. The Gemini XGA-3000 got great reveiws (4 stars), but almost as important published its specs on power to the speakers in dbs and rms. Anyway the following kinda stuff talks real loud to me:Warranty: 2 YEARXGA-3000True Power from the Professionals!The new XGA SERIES Professional Power Amplifier comes designed to deliver the maximum wattage and amount of power to any speaker.Each XGA amp is durable and lightweight, and offers an unmatched value in their class. With their powerful, reliable performance, the XGA Series amps easily handle any amount of usage and can deliver deep pulsating lows.Features:3000 Watt IPP* High Power output to drive professional loudspeakers without clipping2 x 150 RMS @ 8 ohms stereo2 x 200 RMS @ 4 ohms stereo1 x 400 RMS @ 8 ohms bridgedFront-to-rear airflow and cooling fan for thermal stability and reliabilityXLR and ¼" (6.5mm Jack) balanced and RCA unbalanced inputsLimiter circuit switch for amp output protectionStereo, Parallel Mono and Mono BridgeVariable speed fan for low noiseComprehensive front panel indicators including signal, clip, protect3 Speakon outputs for Channels A/B/Bridge5-way binding banana plug channel outputsBridge control switchDC output protection and Short circuit protectionFrequency response 10Hz - 50kHz at 1.5 dBGround lift switchTotal Harmonic Distortion: Less than 0.1%Input sensitivity & Impedance: 0.77vSignal to Noise (20 Hz - 20 kHz) > 90dBInput Impedance: 20K ohmsTHD @ 20HZ - 20KHZ - 0.1 %Damping factor: >350power, protection, clipping, and bridged LED indicatorsAC line fuse protectionThermal Cutoff Protectionpower up/down protectionslow start protection115/230V switchableDimensions: 19 x 13.8 x 3.5 inchesweight: 19.04 poundsWell I looked at a lot amps under $250 and this one had the rep and the specs I looked for-so I got it.My testing reveiw:I have it in line with my PC with 620G XHD, my CAVS DVD 105G-multi/CDG/USB-XHD/MPEG4/HDCD player, my Gemini MM-3000 3 mic/5 channel Mixer, and my Gemini PA-7000 PreAmp, driving two 15" KCH subs, four 8" mids, and two 8" singers floor monitors. So far I haven't turned the PreAmp OR the Amp up more than 1 o'clock and I AM GETTING SOME SERIOUS BIG AWESOME CLEAR SOUND WITH ALMOST NO DISTORTION. This is with it set up with a balanced 8 ohms per speaker setup side, so that's the lowest power setting of 150 rms. Of course I don't want to push it. For another $170 (or less)I plan to get another for output B on my PreAmp, for speaker upgrades to larger venues.That'a my review. For the money as a no frills Pro Amp I think it gets the job done great if you set up your system correctly and have a good mixer and PreAmp. 5 stars from me.Kman 4/16/11
Productos recomendados
Mex $17,700.00
Mex $ 1,881 .00 Mex $1,881.00
Mex $2,378.56
Mex $ 1,046 .00 Mex $1,046.00
Mex $469.20
Mex $ 220 .00 Mex $220.00
Mex $314.63
Mex $ 157 .00 Mex $157.00
Mex $5,342.04
Mex $ 1,881 .00 Mex $1,881.00