No hay artículos en el carro
No hay artículos en el carro Características:
1, el sello del pistón con anillo en V, buen efecto de sellado, resistente a la abrasión, estable
2, estructura tipo pistón, flujo que el flujo de diafragma convencional 30%
3, el desbordamiento de la estructura del cuerpo, descompresión rápida e intuitiva
4, regulación de voltaje de alta precisión, sensible
5, se puede instalar la estructura del indicador de gas original, la válvula de liberación de gas original, diversas aplicaciones
Especificaciones:
Adecuado para: compresor de aire de pistón
Tipo: Con soporte para compresor de aire pequeño
Cantidad: 1 ud.
El paquete incluye:
1 válvula reguladora.
David Rafuse
Comentado en Canadá el 6 de enero de 2025
Very light on material
valerie m levy
Comentado en Canadá el 7 de julio de 2024
Like the fact it was easy to replace.
Alberto
Comentado en México el 7 de septiembre de 2023
Adquirí este producto para mí compresora de 25 litros, le remplaze el que tenía ya que tenía fuga y hasta el momento todo bien, recibes lo que pagas.
Barron C.
Comentado en Canadá el 4 de septiembre de 2021
I agree with others who have purchased this product. It is not a high-quality casting and is shipped with no information on thread sizes or air/pressure flow through the various ports. Several purchasers responded to my query to verify that the largest port on this regulator is the direct connection to the compressor (thank you!). With that information and a $4 reduction fitting for the large port to supply-side elbow, I was able to use the gauges and fittings from my broken (cracked regulator and gauge manifold), Hot Rod compressor to cobble together a working unit. It's not pretty, but it works.
Bernie McKinnon
Comentado en Canadá el 8 de junio de 2020
Fast shipping and great value for the price. Be careful installing it and don't over tighten the connections. Worked well for me.
B
Comentado en Canadá el 17 de septiembre de 2020
I bought this manifold hoping to replace a badly cracked manifold on my home Hot Rod (All Trade) dual tank air compressor for which replacement parts are no longer available. There is not a lot of detail in the listing with respect to measurements, thread type, etc., but based on the low cost, I thought it was worth the risk to try it. It is certainly not an exact replacement and it is a very low quality metal casting, but it has all of the required inlets/outlets and I was able to reuse the gauges and quick-connects from my other manifold and was able to easily adapt a bracket to secure it in place. It did have 2 extra connection outlets that I was able to cap with brass fittings that I picked up from Home Depot. The regulator is also of pretty low quality, but it works. Total investment to fix my otherwise useless compressor was less than $50.
Productos recomendados