Customer
Comentado en los Estados Unidos el 26 de enero de 2025
Function exactly as it should. Tech support was amazing. I had an issue where the light would turn on and then turn off and stay off.Come to find out the face has twisted and pushed and held the button in.Great company to deal with.
Christian
Comentado en los Estados Unidos el 20 de enero de 2025
Great gauge fits perfectly in the glow shift pod. Easy to install. Works great on my 4l60e set up.
craignelson7007
Comentado en los Estados Unidos el 30 de marzo de 2024
I bought this gauge primarily because of the price point, and I thought it looked really cool. The reviews were kinda iffy, but most of the issues seemed to be wiring related.I took great care with my wiring at the sender & at the gauge, and I’ve never had a hint of an issue with the gauge. It always remembers my selected color, wakes up & does the self test when it powers up, and generally does everything you need a gauge to do. 10/10, definitely recommend.I’m so pleased that I bought another one for a different jeep.
Luis
Comentado en México el 20 de noviembre de 2024
Muy buen equipo, muy elegante y en la noche muy bien iluminado y de fácil lectura, super recomendable
Mark M
Comentado en los Estados Unidos el 4 de febrero de 2016
I purchased four of these various gauges and they're worth every penny. I really like the customizing color capability. They fit perfectly in the GlowShift Pillar Pod too. Instructions were very simple and easy to follow. Customer support was also extremely helpful as I had to contact them for the following reason....After installing all the gauges and testing them I could not get the gauges to change colors. Also, on two of the four gauges the button for changing colors would not depress. Technical support stated that the buttons would not depress because I turned/adjusted the gauges from the outside bezel ring, which turns the bezel ring just slightly and jams the button. As instructed I pulled the gauges out of the pod just enough so I could grab the gauge from the main body and turn it to align as need and turn the bezel back to release the pressure from the button. The buttons then worked properly but the colors still did not change due to the second reason stated by tech support. The instructions inform the user to use a 3 amp fuse if wiring directly to the battery such as I did. Instead of running 4 lines and 4 fuses I ran one main line (fused) from the battery and into the pod. I then tied each gauge into the main line. This proved to be another problem in proper operation since the 3 amp fuse was not enough for all 4 gauges. I replaced the 3 amp fuse with a 7.5 amp and everything works great. It would have been nice to have this information about the bezel ring and wiring method added to the sheet instructions but the tech support was great.
doubled822
Comentado en los Estados Unidos el 18 de agosto de 2014
Fantastic gauge. Accurate and very neat looking on the interior of my Jeep Cherokee. Installation was fairly easy and straight forward. If I had to complain about anything I suppose it would be that the wiring harness wires are pretty flimsy. Also, for those of you looking, this does not include any installation hardware besides the gauge, temp sensor and some mounting stuff. I had to run to the hardware store for a T-fitting and 3/8" hose barbs to hook this up to my transmission lines. Would defnitely buy again.Also, if you're looking for replacement temp sensors, you can get them on GlowShift's website for about 10 bucks. I'm going to get another and link them with a toggle switch so I can monitor both output temps, and cooled fluid temps.UPDATE: I've been running the Glowshift for several months now and have a few things to add.The gauge itself is still great--but tracing down an annoying rattle in my Jeep led me to the color-change button on the gauge. It has an annoying rattle against the lens. A simple little grommet would fix this. I haven't fixed it yet or figured out how I'm going to. It's pretty annoying. Also, the sending unit wires are too flimsy. I moved my sending unit to another line and have to redo the wires with solder now. Still pretty happy with it otherwise.