No hay artículos en el carro
No hay artículos en el carroLos termostatos Nest están diseñados para funcionar sin un cable C en la mayoría de los hogares. Pero algunos sistemas pueden requerir un cable C para una alimentación constante a tu termostato Nest. El conector de alimentación Nest es un sustituto de cable C asequible para hogares que no tienen uno. No requiere ningún cableado de termostato nuevo. Y con instrucciones sencillas puedes incluso instalarlo tú mismo. Si algo anda mal con tu termostato Nest, Google te avisará en el dispositivo, a través de alertas de aplicaciones móviles y por correo electrónico.
Lisa YHZ
Comentado en Canadá el 30 de marzo de 2025
Works as advertised.
Dan Campbell
Comentado en Canadá el 25 de enero de 2025
My cabin only had 2 wire thermostat for the furnace and I wanted to be able to install a google nest for remote access and monitoring. This was so easy to install, and now I can monitor it while away, and turn the heat up before I arrive so its nice and toasty, coming in from the cold.
Andre
Comentado en Canadá el 3 de abril de 2025
I couldn’t even install my 3rd gen Nest without the Google Power Connector—no 'C' wire in my system. This little device made it all possible. Easy setup, and now everything runs smoothly. Absolute must-have if you're missing the 'C' wire.
J. S.
Comentado en los Estados Unidos el 4 de octubre de 2023
Installed a Nest thermostat on my daughter’s condo and found out she only had two wires, red and white with no possibility of running a real C wire due to plaster walls. Confirmed that the furnace had a C wire (critical) and then ordered this dongle. My application was a heat only furnace so the wiring was fairly simple.I strongly recommend that you get three of the wagu type snap-on UL approved wiring connectors unless you have screw terminations to attach to. There are two of the snap on connectors in the box but you will need three more for the furnace side . Trust me - have the connectors handy and installing this device is easy, I tried to use twist on wire nuts but the nuts would no stay on.You need to “tell” the nest thermostat that this adapter was installed during the programming phase on your phone or tablet. Do that slowly because if you miss the check box that says this device was installed the thermostat will not work and the only way to fix it is to delete the thermostat and install it as a new device.Note - This device is specifically designed for the nest thermostat. It will not work as a workaround to add a missing C wire to other thermostat brands.
Bruce Berryann
Comentado en los Estados Unidos el 3 de octubre de 2023
I moved recently and my Nest Learning Thermostat 3rd Generation was having problems where my fan was always running. I reinstalled the old thermostat and it stopped. I found online that my system wasn't supplying the Nest with enough power so I test it by moving one wire to a C wire and the fan issue stopped. I found this and ordered it once I knew for sure that was the problem. All my issues were fixes by this little Connector. The Nest gets enough power and is working perfectly!I'm comfortable turning the power off to my HVAC unit and pulling the emergency braker to make sure there is no power in the system before removing the panel on the unit. It was very easy to install once it was open. If you're not comfortable doing that, I would pay a professional to do it.
Productos recomendados
Mex $251.32
Mex $ 125 .00 Mex $125.00
Mex $518.96
Mex $ 280 .00 Mex $280.00
Mex $327.06
Mex $ 150 .00 Mex $150.00
Mex $379.00
Mex $ 185 .00 Mex $185.00