No hay artículos en el carro
No hay artículos en el carro
Haoge LH-X54B - Parasol cuadrado de metal especialmente diseñado para cámara Fujifilm X100VI X100V. La capucha de la lente sombrea la lente de la luz perdida, evita o limita el brillo de la lente, mejorando tu contraste y calidad de imagen. Proporciona protección adicional a la cámara y la lente contra arañazos accidentales.
Características:
Diseñado para Fujifilm Fuji X100V X100VI.
Ayuda a bloquear la luz y los reflejos.
Proporciona una mayor protección a la lente.
Construcción duradera de aluminio anodizado.
Acabado mate antirreflejos que evita reflejos.
Capucha de lente de metal anodizada hecha de aluminio.
La tapa original de la lente Fujifilm se puede montar en la lente.
No afectar el uso del filtro UV de 49 mm.
Compatible con:
Fujifilm X100V X100VI.
(Nota: no se puede utilizar para otras cámaras)
Instalación:
Paso 1: retira el anillo de X100V X100VI.
Paso 2: Insall el anillo adaptador a la lente.
Paso 3: el filtro de 49 mm se puede instalar en la parte delantera del anillo adaptador (el filtro no está incluido).
Paso 4: atornilla la capucha de la lente al anillo adaptador, hasta que la capucha de la lente sea horizontalizada (no es necesario atornillar hasta el extremo).
El paquete incluye:
1 parasol cuadrado Haoge LH-X54B para lente Fujifilm X100V X100VI.
(Nota: para utilizar la capucha de la lente, el usuario tiene que quitar el anillo en la parte superior de la lente de Fujifilm X100V o X100VI)
かかかかか
Comentado en Japón el 20 de febrero de 2025
fujifilm x100tに装着しました！装着するとライカqシリーズなような佇まいになりかっこいいです。
Good, just wish there was lens cap
Comentado en Singapur el 30 de enero de 2024
Good, just wish there was lens cap
The Dude
Comentado en Canadá el 24 de marzo de 2023
I recently purchased the Haoge LH-X5W Square lens hood for my Fujifilm X100F camera, and I must say that I am very pleased with it. The Haoge Square lens hood is made of high-quality aluminum alloy material, and the finish matches the X100F camera quite well.One minor issue I found is that the lens hood cannot be tightened all the way onto the camera's lens as it wouldn't sit straight. However, even when not tightened all the way, the lens hood is still fairly snug and stays in place. This does not affect the overall functionality of the hood and is a small inconvenience.I highly recommend purchasing the Haoge Cap-X54W along with the lens hood, as the original Fujifilm X100F cap will not fit on the lens hood. The Haoge Cap-X54W fits perfectly on the hood and keeps the lens protected from dust and scratches.Overall, I would highly recommend the Haoge LH-X5W Square lens hood and the Haoge Cap-X54W for Fujifilm X100F owners. They are both well-made, easy to use, and enhance the functionality and protection of the camera's lens.
Nicholas Erwin
Comentado en los Estados Unidos el 25 de marzo de 2021
Fujifilm doesn't include a lens hood with the X100V and for the money, they really should in my opinion but here we are. The search for the best lens hood for the X100 series and this definitely is the one...well for me anyways.I bought the camera to be a EDC/Travel/Documentary/Backup camera to my XT4 and I didn't want to compromise the size of the camera. I wanted to keep it compact as I could. This square hood by Hoage doesn't add to the bulk nor weight of the camera. It doesn't affect the OVF very much and it does a wonderful job at blocking stray light and providing more contrast as well as giving you something extra to grab onto.Installation was tricky to say the least. I say to sit down, grab a coffee watching your favorite show and keep playing with it until you get the alignment right. I took me a good 15-20 minutes, the gasket makes it hard to turn be I ensure, it will keep turning. Just do 1/4 turns at a time, it will get very tight but this is what you want so it doesn't come loose.The quality is great, no complaints. When I took the hood out of the box, I accidently dropped it on the floor and it made a loud DING! and bounced back up with me catching it. It didn't leave a single mark on the hood, didn't dent it or anything but it left the mark on the floor! I'd say its built pretty well!As for the filter I am using, as well all know the X100V is weather sealed but requires a filter to protect the front element as it extends externally when focusing. I am using a B+W 66-1066114 (Amazon:B004OVE16U) and its fits PERFECT! Good quality too, doesn't affect images...in fact it might help them.This is a good alternative to the expensive Fujifilm kit or the fancy overpriced Sweden alternative. I HIGHLY recommend this lens hood!
Starryj63
Comentado en Australia el 5 de diciembre de 2021
Fits perfectly on my x100v. If there is one comment I would add is that the genuine Fuji lens cap doesn’t fit well on it as advertised.It will go on but it’s not square and comes off easily
Productos recomendados
Mex $212.00
Mex $ 127 .00 Mex $127.00
Mex $221.80
Mex $ 133 .00 Mex $133.00
Mex $971.25
Mex $ 524 .00 Mex $524.00