No hay artículos en el carro
No hay artículos en el carro
- lente de detección estándar: 30 x 30 x 1 mm (hierro)
- Especificaciones actuales: Consumo actual: Máx. 2,5 mA.
- Frecuencia de respuesta: 20Hz
- Material: latón (niquelado).
- Cable Estándar/material: Cable estándar
- Estructura de protección: IP67
- Aprobación: CE
- Ambiente_Temperatura ambiente: -25 a 70 ℃, almacenamiento: -30 a 80 ℃.
- Ambiente_Humedad ambiente: 35 a 95% HR, almacenamiento: 35 a 95% HR
- Histéresis (distancia): Máx. 10% de la distancia de detección
- Tensión residual: máx. 2 V.
jodeg
Comentado en los Estados Unidos el 27 de octubre de 2024
The Heschen Proximity Switch, Model PR30-10A0, is well constructed. It is as described. The detection distance is approximately 7mm. For my unit, satisfactorily meets my requirements. No problems with it.
Mr_D
Comentado en los Estados Unidos el 23 de octubre de 2024
This is a simple proximity sensor that acts as a normally open circuit till metal passes near the sensor and then it turns on and conducts through the 2 wires.It looks like a capacitive sensor but it's not.It won't detect wood, plastic or your hand at all.Only ferrous metal is detected.It handles from 90- 250V AC input but only at 0.4Amps or less (400mA total current).Even a light bulb as a load could burn it out if its more than 48 watts (120V x 0.4A - 48Watt max)so it's meant for small, control system type of load.This gets installed INLINE with your load to function as a switch.This type of switch is typically used in industrial automation in a factory where it serves as a sensor input to run other circuits such as a relay, lamp indicator or an input to another circuit.Then a 2nd circuit (not present here) would then handle the main load.This is the sensing portion of a larger circuit that can fit many applications.It detected metal consistently when tested from 0 to 0.35 inches away and has an LED output indicator which is useful.
Productos recomendados