No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Protege los umbrales de la puerta del Jeep de daños. Además de ofrecer protección, también se puede utilizar para cubrir arañazos y rasguños existentes
Placa de protección de entrada para el umbral de la puerta para Jeep TJ Wrangler 1997-2006
Cinta de montaje incluida, la instalación tarda menos de 15 minutos
Fabricado con plástico ABS negro moldeado por inyección
El paquete incluye:
- 1 juego de alféizar de puerta de carretera
¿Por qué elegir Hooke Road?
pacepicante
Comentado en los Estados Unidos el 14 de abril de 2025
Perfect fitment on my 04 Wrangler. I installed these in an hour. They fit great and look great too. I had to get off all the old stuck on glue etc that took a while but it was easy other than that.
cesar
Comentado en México el 22 de agosto de 2024
Apenas lo intale veremos como funciona, el material se ve bien, reforce con un pegamanto adicional, ya que las tiras que trae parecen muy fragiles
Jeff Gipple
Comentado en los Estados Unidos el 19 de junio de 2024
Fit well.
Gene Sutton
Comentado en los Estados Unidos el 27 de marzo de 2024
I liked the price, and I used it on my wrangler Tj
Dobie S. Pinscherman
Comentado en los Estados Unidos el 13 de septiembre de 2023
These are decent, well made, fit nicely, etc. When they stick, they protect the edges of the sill like they are intended. The issue is, the back side (mounting side) isso smooth, and slick, that the tape will not stay stuck to the pieces. The directions suggesting "rough up the finish" for them to stick to your sills. The issue is, the protectors need to be roughed. Not your jeep.Mine stayed attached until the first time i got out of the jeep. My pants cuff caught the corner, and it popped right off. No biggie, it also stuck right back on. After a dozen times of this happening, I ripped the tape off my jeep, and put on clear double sided Gorilla tape. After a couple of days the thing popped off again. It also stuck right back on, so I dealt with it. (the tape was firmly stuck to the jeep again)So finally I decided to use the only option left. I attacked the trip plate with some 40 grit sandpaper. After removing all of the gloss and smooth surface from inside trim plate, I wiped it down with brake cleaner, and went with heavy duty black Gorilla double sided tape (available from amazon) as seen in the pics, I marked the outline of the sill with a sharpie (also available from amazon) I applied full length piece of tape to catch the top, and bottom edges of the trim, and i used the remainder of the tape in the center. (Only 60" on a roll)I reapplied the trim plate, and letting it sit overnight, (after rubbing it tightly into place on initial mounting) I tried a corner of the plate with my hand, to see if i could remove it. I COULDN'T!!! great success!!! The original tape may have worked, if the sill protectors werent so smooth and shiny that nothing would stick to them.For this reason I only gave this 4 stars. These could have/should have been prepared when manufactured, to allow the tape to stick in the first place.
janice
Comentado en los Estados Unidos el 14 de agosto de 2022
Cheap and do the job
Productos recomendados
Mex $1,399.99
Mex $ 587 .00 Mex $587.00