No hay artículos en el carro
No hay artículos en el carroMás información del producto
maria
Comentado en México el 30 de julio de 2024
Buen a calidad,si vale la pena comprar este ventilador
Jordi López
Comentado en México el 16 de junio de 2024
No se pudo cargar el contenido.
Enrique
Comentado en México el 13 de junio de 2024
Buenos acabados ,Trabajan sin hacer ruidoLo que pongo de pero es la iluminación muy bajaPero de lo demás bien
Cliente de
Comentado en México el 22 de noviembre de 2024
Producto de calidad. con buen manual de instalacion.
Simón dice
Comentado en México el 17 de junio de 2023
No se pudo cargar el contenido.
Mike
Comentado en México el 20 de enero de 2022
Justo lo que buscaba. Ya varios meses desde que lo compré para el cuarto de visitas. Le quedó a la perfección y está muy bonito. Las velocidades están bien y el nivel de ruido es el minino. Lo que si, es el armado lleva algo de tiempo. Fuera de eso buena opción de ventilador
Jose Luis
Comentado en México el 24 de septiembre de 2022
Muy buena calidad en todas sus partes, las aspas se sienten ligeras solo espero que no se deformen con el tiempo!. Muy buen volumen de aire en la velocidad 3 . Visualmente muy bonito!
Arturo E.
Comentado en México el 16 de abril de 2022
Excelente abanico, hace muy poco ruido, en mi caso lo instale en una recamara pequeña y la cantidad de aire que avienta es muy buena, no trae control remoto pero en mi caso yo queria adaptarlo con un control inteligente wifi de pared para poderlo controlar con Alexa y me funcionó perfecto de esta manera
Mav898989
Comentado en los Estados Unidos el 22 de enero de 2021
I was a little hesitant, given some of the comments. None of the mentioned issues at all. This fan is not a higher end model, but it is not cheap looking either. Perfect for kids room. Easy to assemble following included directions. Took 1 hour (fan rated box already in place). Most of the time was spent on annoying fan blade alignment and attachment. Only complaint is that the wires coming up through the top shroud were pretty short. The instructions said cut excess leaving minimum 8 inches. They were only maybe 4 inches to begin with. Not much room to make connections from box to fan while holding fan tilted open on its hanger. Perfect balance, no wobble, no noise. Well, on highest setting you can hear rushing air, but.... it's a fan. Running on Lutron Maestro digital fan/light dimmer switch. Included bulbs were too yellowish and dim. Swapped bulbs to max rating listed (13watt) with higher color temperature. All is good.
Customer
Comentado en Canadá el 2 de agosto de 2020
Clear instructions: well drawn, worded and organized. Reading them through first helps.Parts: all good except 1 bolt. Had to replace it with one of my own. Just wouldn't go in without crossing threads.FOR HUNTER: in future please add 1 spare bolt of every size/type to the package. THANKSSIZE: worked fine in 2 small bedrooms (ceilings about 8'3" in height). 7 ft clearance floor to fan blades achieved.Quiet operation: so much quieter than the old fans they replaced.Nice bright light: uses two regular LED bulbs - no special fittings. Will be easy to replace in due courseExcellent downdraught in summer - made a difference to the house temp and aircon run time already.
Chris Concessi
Comentado en Canadá el 9 de octubre de 2020
Liked the ceiling fan. Used in bedroom for light and fan.
M B
Comentado en Canadá el 2 de diciembre de 2018
A little large for my room but it is fine and a bit of furniture rearranging will make it fine. Quiet and very modern looking. I had it installed by an electrician and he commented that Hunter fans are always easy and work well.
relchip_rrea
Comentado en los Estados Unidos el 2 de enero de 2018
I love the way this fan looks and works. Assembly was not too bad - the hardest part is when trying to align three different parts to run the screws through (while the piece that the screws go into easily rotates. Check that the screws fit first before trying to put it together. Also, when installing the fan blades, it is easier to use a dowel to hold the fan in place when starting the first screw (three screws per blade). I used the smooth end of a drill bit - this holds the fan blade close enough to the correct position to start the first screw. Install the three screws a little loosely to get the fan blade aligned, then tighten them up. Also, install the chain pulls before mounting the fan. Use something to hold the stubby-end of the chain before removing the plastic end - they are a bugger to fish out if they fall inside the housing. I would rate the assembly as 4 stars, but I like the fan so much, and it looks so good, that I'm rating it 5 stars.
Productos recomendados
Mex $4,046.98
Mex $ 1,780 .00 Mex $1,780.00
Mex $113.92
Mex $ 67 .00 Mex $67.00
Mex $1,604.84
Mex $ 738 .00 Mex $738.00
Mex $4,301.07
Mex $ 1,806 .00 Mex $1,806.00
Mex $801.36
Mex $ 376 .00 Mex $376.00
Mex $3,475.00
Mex $ 1,598 .00 Mex $1,598.00