Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

JJC Filtro de protección UV para Ricoh GR IIIx GR IIIx HDF GR3X HDF GR III GR III HDF GR3 HDF & GR II GR2, 19 capas con revestimiento de revestimiento múltiple ultra delgado UV ultravioleta con

Envío gratis en pedidos superiores a Mex $600.00

Mex $477.32

Mex $ 243 .00 Mex $243.00

En stock

Acerca de este artículo

  • Compatibilidad: el filtro UV ultradelgado L39 está diseñado para cámaras compactas digitales Ricoh GR IIIx, GR IIIx HDF, GR III, GR III HDF y GR II.
  • Protección UV: el filtro bloquea la luz UV y reduce la emisión azulada de la luz diurna que puede afectar la precisión del color, especialmente a mayores altitudes. Deja el filtro en tu lente como un filtro protector general para proteger de nuevo el polvo, los arañazos y las huellas dactilares.
  • vidrio óptico de revestimiento múltiple: los revestimientos de múltiples capas evitan el efecto fantasma interno y los reflejos, mientras que hacen que el filtro sea antiarañazos, antiestático, resistente al aceite y al agua.
  • 【99.5% de transmisión y diseño delgado】El filtro está fabricado con vidrio óptico de alta calidad y ofrece una tasa de transmisión de luz del 99.5%. Cuenta con un marco de aleación de aluminio ultra delgado de 1,8 mm para evitar que se viñete.
  • Anillo calcomanía 3M: coloca fácilmente el filtro UV en la lente de tu cámara con el calcomanía 3M. Retira la pegatina en la parte posterior del filtro, alinea el filtro a tu lente y pégala. Retira el filtro con la herramienta de extracción incluida.



Descripción del producto

F-WMCUVG3
1

123

Marco de aluminio de 0.06 pulgadas

El filtro está fabricado con vidrio óptico de alta calidad para una mayor claridad óptica y fidelidad del color. Diseño delgado con marco de aluminio de 1,8 mm que ayuda a minimizar el potencial de viñetado.

123

Capa de revestimiento múltiple

El revestimiento múltiple minimiza los arañazos del vidrio y ayuda a asegurar que el agua, el aceite, el polvo y las huellas dactilares se eliminen con un paño suave.

123

Estuche de filtro gratuito

Viene con una funda de filtro para una mejor protección.

123
123

llf27
Comentado en los Estados Unidos el 15 de febrero de 2025
Very nice
Ligokoti
Comentado en los Estados Unidos el 9 de abril de 2025
Nice
Rory
Comentado en Canadá el 23 de mayo de 2024
Note: this filter doesn’t fully protect against dust coming into your sensor. The outer barrel can still draw it in. I have always carried a camera pen brush to quickly remove dust.My main reason for getting this filter was something people rarely speak about: the very thin electronic leaf shutter protector. I’m always concerned something will damage it, especially if it’s in my pocket without my lens cap. That’s no longer a worry and makes this filter worth the cost alone.The pictures of the filter makes it look far more obvious and pronounced than it is. It essentially disappears into the camera so it looks like it is part of the original design. It’s tiny, thin, and clear. And now the lens and inner barrel are protected. Plus, it looks good.No instructions provided. Refer to the instructions and video in the promo photos for this Amazon listing.Be careful when removing the 3M sticker backing. It’s tricky. It is easy to accidentally brush the inside of the filter glass and smudge it as you remove it. If I had to do a do over I would use a tweezers.Apply in a room with bright lights. Suggest to hold camera face down (take advantage of gravity) while on to get rid of any dust inside the barrel first and carefully inspect the filter and brush away any dust or clean any smudges before applying. You get one shot applying this filter because it’s so sticky (though the filter does come with an extra 3M sticker if you ever need to reapply).*Tip: It’s easier to apply with the camera turned on and the lens barrel out while the camera is resting facing up on its back.* That will ensure it’s perfectly centred over the identically sized barrel. Careful that the lettering is centred at the top if that matters to you.Keep the tools to remove the filter if you need and the extra sticker. I understand it’s tough to remove and you shouldn’t do it with direct force. I would probably heat lightly and very carefully with a hairdryer and then use the string-based tool as I have read some people have damaged their camera removing with force.I also have the metal lens cover and the glass back screen protector by the JJC. Both high quality and great purchases. Filter and lens cap work great together.I use the included oem strap on the bottom right hook to keep it out of the way and under my hand when shooting. Easy to shoot the camera one handed this way and I’ve never dropped it. The JJC thumb grip not useful for my use case.
Roberto
Comentado en México el 6 de febrero de 2024
Bien material. Excelente tamaño para la Ricoh GRiii
Curtis H
Comentado en Canadá el 22 de mayo de 2023
Every time the lens retracts it can suck in dust that collects inside the deep opening of the lens. Thankfully this filter prevents that. No dust issues yet and I carry the camera in my pocket everywhere I go...
Alex Revenge
Quality is good, no any complaints. Easy to use, works very well. Recommended!
Productos recomendados

Mex $314.10

Mex $ 166 .00 Mex $166.00

4.9
Elegir

Mex $1,658.18

Mex $ 795 .00 Mex $795.00

4.3
Elegir

Mex $649.90

Mex $ 344 .00 Mex $344.00

4.5
Elegir

Mex $277.47

Mex $ 138 .00 Mex $138.00

5.0
Elegir