No hay artículos en el carro
No hay artículos en el carroDescripción del producto
ELÉCTRICO
Voltaje (máx. ): 250 V CA/CC
Corriente (máx. ): 12.0 A
Resistencia de contacto: 10 mΩ máx
Voltaje Wothstand: 1500 V CA/minuto
MECÁNICA
Grado de ciclo de apareamiento ≥100
Fuerza de extracción del terminal:
Medición de velocidad de 25 mm/min
14AWG>201N, 20AWG>95N
FÍSICO
Carcasa:
Enchufes y receptáculos: Nylon UL 94V-2
Contacto: Latón
Temperatura: -40 a +105 °C
ivan evgeniev ivanov
Comentado en los Estados Unidos el 15 de marzo de 2025
Covers requirements
S. Pupp
Comentado en los Estados Unidos el 1 de agosto de 2024
I bought these connectors to provide a quick connect/disconnect for speaker drivers to their crossovers while in the development phase of this project. These connectors fit together well, with much less of the fiddling necessary compared to the smaller hard drive "Molex" connectors. I botched the crimp a couple times and there were no spare terminals included, but I had extras on hand. I threw away the bag my extras came in and cannot guarantee 100% the part following numbers, but I just compared measurements and they match:Pin terminal (fits into female connector I believe): Molex Part Number: 02092103 (2.36mm Diameter, Standard .093" Pin and Socket Crimp Terminal, Series 1190, Male, with Tin (Sn) Plated Brass Contact, 14-20 AWG)Socket terminal (fits into male terminal I believe): Molex Part Number: 02091104 (2.36mm Diameter,Standard .093" Pin and Socket Crimp Terminal, Series 1189, Female, with Tin (Sn) Plated Brass Contact, 14-20 AWG)
Amish Country
Comentado en los Estados Unidos el 28 de julio de 2024
Product Reviewed: JRready ST6417 - Molex MLX Power Connector kit for $13TL;DR; Convenient kit; Polarized connection; Strong ConstructionI was looking for a polarized connector for the low voltage side of 12V electric fencing. These fit the bill nicely.These appear to be compatible to a variety of Molex style connectors found on automotive applications. I was not able find a cross reference table but the listing details should give you enough information if that is your use case. I was only interested in a male/female set for power connections that was polarized and protected the hot side from shorting out.I reviewed the ST6417, ST6415 and ST6424 kits but only fully tested the ST6424 for a full wire assembly. The other connectors and pins seem to be of the same quality and fit.The only detractor for these kits is the lack of a cross reference table but given the detailed descriptions in the listing this is a minor issue.4.5 stars and a nice value.How I review:Reviews start with 5 stars and I subtract points.- 0 for value but I try to provide guidance-0.5 to -3 for product not matching description e.g. stainless steel is actually plated steel-0.5 to -3 for product missing badly on executionI select products carefully so low (1-3 scores) are rare but detailed comments and critiques almost always are in the review. Most of my reviews come out 4-5 range.If possible I dismantle or destroy items to examine inner workings.
Dave
Comentado en los Estados Unidos el 22 de junio de 2024
I've gotten several items from JRready, and overall I feel they sell good quality tools and parts, like these 4 pin connectors. Over the years, Ham radios have used various connectors for their power, and at one time Icom, and I don't know who else, used this type of 4-pin connectors for power. Both my IC-25 and IC-27, and many other radios built around this same time, used this type of 4-pin power connector. If you need to deal with older radios, that use this type of power connector, then this is what you want.
SP Walker
Comentado en los Estados Unidos el 3 de diciembre de 2024
Very nicely packaged to keep them organized until they are all used. Also makes them easy to find after they have been in a drawer for a few months.
Productos recomendados
Mex $290.49
Mex $ 153 .00 Mex $153.00
Mex $470.51
Mex $ 244 .00 Mex $244.00
Mex $341.20
Mex $ 174 .00 Mex $174.00
Mex $347.55
Mex $ 159 .00 Mex $159.00
Mex $134.87
Mex $ 80 .00 Mex $80.00