No hay artículos en el carro
No hay artículos en el carro
Descripción:
- 【Juguete de limpieza duradero】: este juego de recogedor de escoba de limpieza para niños está hecho de materiales de alta calidad y es duradero.
- 【Juego de limpieza realista】: juego de limpieza para niños pequeños, con lindas formas de animales, mangos de escoba largos y escobas de cerdas gruesas, adecuado para niños de 3 a 8 años.
- 【Juegos de simulación】: el juego de simulación de limpieza para niños pequeños está especialmente diseñado para que sus hijos cultiven su independencia y usen su imaginación para divertirse, ejercitar el cuidado personal y las habilidades prácticas.
- 【Cultivar buenos hábitos】: los niños aprenden a limpiar haciendo actividades domésticas por sí solos y desarrollan buenos hábitos de la limpieza y mantener la habitación ordenada, lo cual es educativo y entretenido.
- 【Regalo ideal】: el juego de limpieza y barrido se puede utilizar para funciones realistas y puede limpiar la habitación de su hijo. El juego de limpieza para niños es un excelente regalo de cumpleaños y días festivos para niños y niñas.
Gráfico de tamaño:
- Escoba: 21 cm x 57,8 cm/8,27 pulgadas x 22,76 pulgadas
- Recogedor: 18 cm x 12,5 cm x 60 cm/7,09 pulgadas x 4,92 pulgadas x 23,62 pulgadas
El paquete incluye:
1 juego de limpieza para niños.
Nota:
1. Este no es un juguete infantil, quítelo de los niños para evitar comer.
2. Permita errores leves debido a la medición manual y diferentes monitores.
Alistair C. Mitchell
Comentado en el Reino Unido el 17 de marzo de 2025
This did what it stated to do. We mixed very carefully for 5 minutes each time. When dry to the tough after 40-50minutes.Second batch we got some pigments to mix in. Worked well. Mixed pigment in 'A's cup first until disspersed and constant in colour, then added to 'B's cup until the same result.
jamie
Comentado en Canadá el 1 de abril de 2025
It seems like this silicon ruined my project which was hand built for 2 weeks and now the silicon got so many bubbles inside and melted my clay. Also, the silicon never dried so I waited almost a week but still some part was liquid. I opened it today can't wait longer and found that the around part of clay were still liquid..I think this silicon doesn't get along with clay..I had high hope on this project and silicon and now I'm so disappointed..
Fundatory, LLC
Comentado en los Estados Unidos el 19 de agosto de 2024
I've seen others give negative review of this product due to incorrect use related to using the silicone with 3D Printed models. For FDM printers, the silicone will do a great job, no extra work needed. For resin printed 3D objects, extra care has to be taken to prep the models for use with the silicone. Most importantly, you need to properly wash the model with isopropyl alcohool. You can not use any isopropyl alchohol that you've previously used to clean other prints. If you do, your molds will come out a guey mess like others using the product have noted.Use isopropyl alcohol that you've never used before to clean the resin print. Once washed, spray it properly with more alcohol. The key here is to have no leftover resin on the model - if this uncured resin (invisible to see) comes in contact with the silicone it will contaminate it and the silicone will never harden and the contact surfaces will be a guey mess. Once you've properly washed the printed resin model with alcohol, wash the model with hot water and dishwashing liquid (not in a dishwasher), using a toothbrush to get rid of all the alcohol. Then rinse the model with water so that there is no dishwashing liquid (or alcohol or resin) left on the model. Put the model in water and cure with UV light for at least 20 minutes. Keep the model in the water for a day (preferably under direct sunlight - while still in the water). Once done, let it dry properly - do not use a hair dryer for this. Blow air on it or let it dry naturally, you can also dry with a cloth or paper towel. Only once it has completely dried is it ready for use with the silicone. Hope this helps someone.
Paul E.
Comentado en el Reino Unido el 5 de julio de 2024
This silicone is ideal where you need a very flexible material which is also very robust. It’s easy to use being a simple 50-50 mix ratio. The working time is around 30 minutes but can be made shorter or longer by increasing or decreasing the ambient temperature respectively. I like the fact that it came with mixing sticks, disposable gloves and a nice trimmer tool.I have been successfully using this with 3d printed moulds made from PLA which are reasonably easy to remove, especially if you apply a little silicone based lubricant or Vaseline to the mould before pouring the silicone.
Omar Francisco
Comentado en México el 24 de julio de 2024
No llegaron los tubos solo el cepillo y el recogedor muy mal
Scott Stamp
Comentado en Canadá el 2 de septiembre de 2024
This silicone is labelled for mold making, but I've been using it to cast into alginate molds and it works great. Cured no problems at all and the hardness lines up well as described, feels around 5-10A shore. Takes dye no problems too.Vacuum degassing is necessary when casting, for anything that needs to be food/body-safe. The self-degassing works well for mold making but it still traps some very fine bubbles in a casted part. If near-microscopic surface bubbles aren't a problem for your application it's fine to use without degassing. The super thin viscosity makes it nice to work with in a vacuum chamber, doesn't foam up too badly and the trapped air comes out fast.
Elizabeth
Comentado en México el 14 de abril de 2024
El artículo muy bonito, lo que esperaba, llegó rápido, solo venía en una bolsa y es plástico obviamente llegó roto, busque los pedazos para repararlo ni eso venía.
Productos recomendados
Mex $1,026.28
Mex $ 543 .00 Mex $543.00
Mex $290.00
Mex $ 147 .00 Mex $147.00