No hay artículos en el carro
No hay artículos en el carroDescripción del producto
D.S.
Comentado en los Estados Unidos el 16 de enero de 2025
This plate is so much better than the plate that came with my Bambu A1. I have only used the textured side so my comments don't apply to the smooth side. Everything sticks, and it sticks well. Once the plate has cooled down I can pick the prints right up off the plate. No need to remove the plate and bend it. I have yet to clean this plate after six weeks of printing and everything is still sticking very nicely. I haven't had to use brims at all either. I have to look, if they sell a double sided PEI textured I would buy it, this plate is really nice.
Dean C.
Comentado en Australia el 5 de agosto de 2024
Purchased this as I wanted a smooth plate. This double sided. Smoother and Textured so thought it would be a great.option to be able to just flip the plate when required.The good..Bed adhesion is great. In fact it so good that it is often extremely hard to remove tree suppprts.The surface of the print is flat and smooth..no warping or curling of edges eitherThe bad, parts of the PEI coating have already started to come off.I have let the print cool before removing and also tried removing the print whilst still warm. It does not make a difference. All dots are appearing after each print removal.I also ordered se plates from AliExpress and have not yet had this happening.They were less than half the price of this plate and seem to outperform it.Quite disappointed that it won't last that long.
robothunter
Comentado en los Estados Unidos el 31 de enero de 2024
I have a number of gold PEI plates that I ordered from Aliexpress with a black PEO side. I decided to give the chameleon PEO a try. The triangles get transferred to the bottom layer on both types of PEO but the chameleon PEO has a cool effect where different triangles appear and disappear based on how the light hits the part. These plates are the same as you get when ordered directly from China. The difference is in price and shipping times. You pay about $10 more here but it arrives in 2 days vs 2-4 weeks.I've been printing on this plate for the past 2 weeks in my Bambu X1 Carbon. If you have an X1 Carbon and are not use to using 3rd party plates, the lack of a QRC code on the plate can be annoying. From the device page in Bambu Studio select Print Options and deselect "Enable detection of build plate position". That stops the annoying popup every time you print.If you are printing PLA either side is great. In general the PEO (triangle/diamond) side is better for ABS and the PEI (sandpaper textured) side is better for PETG. You can print ABS on the PEI side but at some point the ABS will melt into the texture and you won't be able to get it out. It usually happens on the purge line and doesn't effect the performance of the plate. I never use glue sticks on these plates so YMMV based on how you want to print. You can print ABS and PETG on this but not always. If you don't have a lot of surface area on your first layer or its very complicated you may have to switch to the High Temp or Engineering plate with glue. As I said, I haven't used glue on this plate so maybe you will have more success in those situations if you want to try it.
KellyG315
Comentado en los Estados Unidos el 25 de enero de 2024
No se pudo cargar el contenido.
Luis Corretjer
Comentado en los Estados Unidos el 15 de septiembre de 2024
Great mirror like finish on parts with either holo or textured finish , works great! Its my number one plate right now for most mats, wood pla tends to stain texture side a bit but it comes off eith some scrubbingAll in all great buy! Ordered one for A1 since i liked them so much
Productos recomendados
Mex $259.99
Mex $ 153 .00 Mex $153.00
Mex $261.00
Mex $ 140 .00 Mex $140.00
Mex $357.53
Mex $ 185 .00 Mex $185.00
Mex $325.84
Mex $ 169 .00 Mex $169.00