No hay artículos en el carro
No hay artículos en el carroKeylessOption - Transmisor remoto de entrada sin llave para Mazda 3 2007-2011 KPU41777
David Garcia
Comentado en los Estados Unidos el 15 de febrero de 2025
Works exactly like it should - whole lot cheaper than the dealer ship
adam
Comentado en Canadá el 23 de julio de 2024
Finish (edges) a little rougher than expected but set up was relatively easy and functions reliably.
Ricky
Comentado en Canadá el 12 de julio de 2024
Did everything to connect to my Mazda 3. Did they forget to put a battrey in this remote? Useless chunk of plastic
Aaron A Lipman
Comentado en los Estados Unidos el 23 de noviembre de 2024
these fobs worked perfect and were fairly easy to program. the instructions were clear and easy to follow.
Max
Comentado en México el 11 de mayo de 2023
Lo programe en 15 segundos literal. Funcionó a la primera y por el precio está súper bien. Super recomendado. Pediré otro.
Rodrigo
Comentado en México el 10 de abril de 2023
Me gustó mucho pues mi control ya no servía el chip y compré este modelo que era el mismo y me funcionó a la perfección
carlos
Comentado en México el 14 de diciembre de 2022
Producto de buena calidadMuy facil de programar, recomendado...
civiliandan
Comentado en los Estados Unidos el 23 de noviembre de 2017
I have purchased two 'Keyless Entry Remote Control Car Key Fob Clicker Transmitters' from 'KeylessOption' for my 2009 Mazda Mazda3. The fob remotes worked great and I felt it was an appropriate price at only thirty dollars. I am very pleased. The only minor negative (and this is an incredibly small negative as the product still got an outstanding 5 star review from me) is after about two months of daily use the white paint on the rubber buttons started to partially rub off (i.e. the “LOCK” and “UNLOCK” buttons). This issue happens with all fob remotes but it seems to begin much sooner on this one. Again, this is a non-issue for me but I figured I would mention it. I have ordered two fobs and both were identical to the originals with one exception. These fob remotes come with a 3 volt CR2032 battery installed whereas the original fob remotes use a 3 volt CR2025 battery. CR2032 batteries can be purchased anywhere so this is another non-issue but I wanted to be informative. One reviewer advised it did not open his trunk but it opens my car’s trunk.I have a 2009 Mazda Mazda3 and these are the instructions I used for programming my new fob remotes:1. Sit in the driver’s seat with all doors unlocked and closed and ensure the trunk is closed as well.2. Open the driver’s door.3. Put the key in the ignition and cycle the ignition from ‘Off’ to ‘On’ three times (do not start the vehicle, just put it in the ‘On’ position). It should go: on, off, on, off, on, off.4. Close and open the driver’s door three times (immediately after you do this, this will make the doors lock and unlock automatically which signifies the car is in programming mode). It should go: close, open, close, open, close, open.5. Immediately press the unlock button twice on the fob remote you want to program (immediately after you do this, the doors will automatically lock and unlock which registers the ID in the fob remote to the vehicle).a. If you have another fob remote to program, immediately press the unlock button twice on the next fob remote you want to program (this will make the doors lock and unlock again). Repeat this step for as many fob remotes as you want to program. If you do not have another fob remote to program, just skip to the next step.6. Take the ignition key out of the ignition (the doors will automatically lock and unlock two times signifying the car is out of programming mode).7. Test all fob remotes to ensure programming was successful. Note that you only have about 24 seconds to get the car into programming mode or you will have to start over.Click 'Yes' below if this review helpful to you. It makes me feel me spending thirty minutes on this review was worth it :)
Productos recomendados