No hay artículos en el carro
No hay artículos en el carroMás información del producto
Knipex - Fabricado en Alemania
Cortador de pernos compacto CoBolt
Corta hasta 0,63 cm de diámetro.
Knipex 71 21 200 - Cortador de pernos (cobalto, 20,32 cm)
De un vistazo:
- Rendimiento de corte excepcional con mínimo esfuerzo gracias al innovador diseño de acción de palanca
- Fácil corte de cualquier cable de hasta 0,63 cm
- Filos de corte endurecidos por inducción
- Dureza de corte de 64 HRC (aprox
Knipex 71 21 200 - Cortador de pernos compacto (20,32 cm)
Una herramienta integral para las demandas más duras, este cortador CoBolt de alta apalancamiento de Knipex cuenta con un diseño de acción de palanca que aplica 20 veces más fuerza de mano para una potencia de corte superior con menos esfuerzo. Este mini cortador de pernos puede cortar a través de más de lo que nunca pensaste posible, hasta 1/4 pulgadas de diámetro con facilidad. Es ideal para aplicaciones automotrices o de construcción, cortar pasadores y clavos, uso repetido en líneas de montaje de fábrica, cortar alambres en entornos agrícolas, o incluso tareas cotidianas como cortar alambre floral o anzuelos de peces.
Forjado de acero eléctrico cromo vanadio, está construido para durar. Este cortador ligero cuenta con bordes de corte a juego de precisión para cortar acero blando o duro. El hueco del filo cerca de la junta mantiene los cables más gruesos en una mejor posición de corte (relación óptima de palanca), por lo que no hay necesidad de volver a colocar la herramienta para lograr el corte deseado. Se completa con agarres de mango de múltiples componentes para un agarre más amplio. También cuenta con mordazas de agarre debajo de la junta para agarrar y tirar de clavos y cables.
Mandíbulas de agarre debajo de la junta para agarrar y tirar de clavos y cables.
Especificaciones:
- Capacidad de corte: Hasta 1/4 pulgadas para cable blando; alambre duro medio de 13/64 pulgadas; cable duro de 5/32 pulgadas; alambre de piano de 9/64 pulgadas
- Longitud: 8 pulgadas
- Peso: 320 g
- Mangos: Revestimiento de plástico
Calidad en cada detalle
A veces damos a nuestros alicates un momento muy difícil. Tratamos de destruirlos para averiguar qué los hace buenos y duraderos. Porque no queremos dejar nada al azar, echamos una mirada larga y cuidadosa.
El acero que utiliza Knipex está endurecido con precisión con un máximo de 0,8% de carbono y partes definidas de cromo y vanadio, lo que garantiza un rendimiento óptimo de corte y una vida útil, aunque requiere una producción especial y cuesta un poco más. Pero nuestras altas demandas de productos requieren esto.
Knipex también mira de cerca los pequeños detalles. Los ángulos, la nitidez, la dureza, la dureza de los bordes de corte. La precisión y el movimiento suave de la articulación. El diseño del mango y el acabado. Seguimos revisando estos temas, investigamos, probamos y mejoramos nuestros alicates.
Características:
Rendimiento de corte excepcional con mínimo esfuerzo
Fácil corte de cualquier cable de hasta 0,63 cm
Precisión, bordes de corte endurecidos por inducción
Mandíbulas de agarre para agarrar y tirar de clavos y cables
Customer
Comentado en Canadá el 18 de junio de 2024
Came just as shown
Customer
Comentado en Canadá el 18 de junio de 2024
Came just as shown
Customer
Comentado en Canadá el 18 de junio de 2024
Came just as shown
Customer
Comentado en Canadá el 18 de junio de 2024
Came just as shown
Customer
Comentado en Canadá el 18 de junio de 2024
Came just as shown
Customer
Comentado en Canadá el 18 de junio de 2024
Came just as shown
Customer
Comentado en Canadá el 18 de junio de 2024
Came just as shown
Customer
Comentado en Canadá el 18 de junio de 2024
Came just as shown
Caleb
Comentado en Canadá el 16 de junio de 2024
I mostly use these to cut self tapping screws, generally if you can fit a screw in the jaws of these; and have the forearm strength you can cut it. After months of cutting screws they still work like a charm. Typical quality item from Knipex, highly recommended!.
Caleb
Comentado en Canadá el 16 de junio de 2024
I mostly use these to cut self tapping screws, generally if you can fit a screw in the jaws of these; and have the forearm strength you can cut it. After months of cutting screws they still work like a charm. Typical quality item from Knipex, highly recommended!.
Caleb
Comentado en Canadá el 16 de junio de 2024
I mostly use these to cut self tapping screws, generally if you can fit a screw in the jaws of these; and have the forearm strength you can cut it. After months of cutting screws they still work like a charm. Typical quality item from Knipex, highly recommended!.
Caleb
Comentado en Canadá el 16 de junio de 2024
I mostly use these to cut self tapping screws, generally if you can fit a screw in the jaws of these; and have the forearm strength you can cut it. After months of cutting screws they still work like a charm. Typical quality item from Knipex, highly recommended!.
Caleb
Comentado en Canadá el 16 de junio de 2024
I mostly use these to cut self tapping screws, generally if you can fit a screw in the jaws of these; and have the forearm strength you can cut it. After months of cutting screws they still work like a charm. Typical quality item from Knipex, highly recommended!.
Caleb
Comentado en Canadá el 16 de junio de 2024
I mostly use these to cut self tapping screws, generally if you can fit a screw in the jaws of these; and have the forearm strength you can cut it. After months of cutting screws they still work like a charm. Typical quality item from Knipex, highly recommended!.
Caleb
Comentado en Canadá el 16 de junio de 2024
I mostly use these to cut self tapping screws, generally if you can fit a screw in the jaws of these; and have the forearm strength you can cut it. After months of cutting screws they still work like a charm. Typical quality item from Knipex, highly recommended!.
Caleb
Comentado en Canadá el 16 de junio de 2024
I mostly use these to cut self tapping screws, generally if you can fit a screw in the jaws of these; and have the forearm strength you can cut it. After months of cutting screws they still work like a charm. Typical quality item from Knipex, highly recommended!.
James
Comentado en Canadá el 26 de octubre de 2024
Quality product made in Germany. Easily cuts nails and screws without much effort. Worth the price
James
Comentado en Canadá el 26 de octubre de 2024
Quality product made in Germany. Easily cuts nails and screws without much effort. Worth the price
James
Comentado en Canadá el 26 de octubre de 2024
Quality product made in Germany. Easily cuts nails and screws without much effort. Worth the price
James
Comentado en Canadá el 26 de octubre de 2024
Quality product made in Germany. Easily cuts nails and screws without much effort. Worth the price
James
Comentado en Canadá el 26 de octubre de 2024
Quality product made in Germany. Easily cuts nails and screws without much effort. Worth the price
James
Comentado en Canadá el 26 de octubre de 2024
Quality product made in Germany. Easily cuts nails and screws without much effort. Worth the price
James
Comentado en Canadá el 26 de octubre de 2024
Quality product made in Germany. Easily cuts nails and screws without much effort. Worth the price
James
Comentado en Canadá el 26 de octubre de 2024
Quality product made in Germany. Easily cuts nails and screws without much effort. Worth the price
Patricia Cristovao
Comentado en Singapur el 30 de septiembre de 2024
The frame is very poor quality and the corners are quite rough/not properly finished. It also comes with a writing ‘My adventures’ which was not in the pictures/description. Would not recommend.
Canyun Bob from California
Comentado en los Estados Unidos el 30 de octubre de 2020
Bought this to remove "shiner" nail points from under the eves. Cuts the nails easily and flush enough that with paint touch up we don't notice all the mistakes the contractor made. Also cuts a variety of solid wire, fencing, etc. And because it's a Knipex it will last forever!
Canyun Bob from California
Comentado en los Estados Unidos el 30 de octubre de 2020
Bought this to remove "shiner" nail points from under the eves. Cuts the nails easily and flush enough that with paint touch up we don't notice all the mistakes the contractor made. Also cuts a variety of solid wire, fencing, etc. And because it's a Knipex it will last forever!
Canyun Bob from California
Comentado en los Estados Unidos el 30 de octubre de 2020
Bought this to remove "shiner" nail points from under the eves. Cuts the nails easily and flush enough that with paint touch up we don't notice all the mistakes the contractor made. Also cuts a variety of solid wire, fencing, etc. And because it's a Knipex it will last forever!
Canyun Bob from California
Comentado en los Estados Unidos el 30 de octubre de 2020
Bought this to remove "shiner" nail points from under the eves. Cuts the nails easily and flush enough that with paint touch up we don't notice all the mistakes the contractor made. Also cuts a variety of solid wire, fencing, etc. And because it's a Knipex it will last forever!
Canyun Bob from California
Comentado en los Estados Unidos el 30 de octubre de 2020
Bought this to remove "shiner" nail points from under the eves. Cuts the nails easily and flush enough that with paint touch up we don't notice all the mistakes the contractor made. Also cuts a variety of solid wire, fencing, etc. And because it's a Knipex it will last forever!
Canyun Bob from California
Comentado en los Estados Unidos el 30 de octubre de 2020
Bought this to remove "shiner" nail points from under the eves. Cuts the nails easily and flush enough that with paint touch up we don't notice all the mistakes the contractor made. Also cuts a variety of solid wire, fencing, etc. And because it's a Knipex it will last forever!
Canyun Bob from California
Comentado en los Estados Unidos el 30 de octubre de 2020
Bought this to remove "shiner" nail points from under the eves. Cuts the nails easily and flush enough that with paint touch up we don't notice all the mistakes the contractor made. Also cuts a variety of solid wire, fencing, etc. And because it's a Knipex it will last forever!
Canyun Bob from California
Comentado en los Estados Unidos el 30 de octubre de 2020
Bought this to remove "shiner" nail points from under the eves. Cuts the nails easily and flush enough that with paint touch up we don't notice all the mistakes the contractor made. Also cuts a variety of solid wire, fencing, etc. And because it's a Knipex it will last forever!
Jan E. Downs
Comentado en los Estados Unidos el 8 de abril de 2013
This is an excellent tool, worth every dime I paid for it. I am an armourer, blacksmith and metal artist and need to clip wires, nails and other items quite regularly. This tool makes it breeze and saves wear and tear on my hands. One of the best things I've ever spent money on.
Jan E. Downs
Comentado en los Estados Unidos el 8 de abril de 2013
This is an excellent tool, worth every dime I paid for it. I am an armourer, blacksmith and metal artist and need to clip wires, nails and other items quite regularly. This tool makes it breeze and saves wear and tear on my hands. One of the best things I've ever spent money on.
Jan E. Downs
Comentado en los Estados Unidos el 8 de abril de 2013
This is an excellent tool, worth every dime I paid for it. I am an armourer, blacksmith and metal artist and need to clip wires, nails and other items quite regularly. This tool makes it breeze and saves wear and tear on my hands. One of the best things I've ever spent money on.
Jan E. Downs
Comentado en los Estados Unidos el 8 de abril de 2013
This is an excellent tool, worth every dime I paid for it. I am an armourer, blacksmith and metal artist and need to clip wires, nails and other items quite regularly. This tool makes it breeze and saves wear and tear on my hands. One of the best things I've ever spent money on.
Jan E. Downs
Comentado en los Estados Unidos el 8 de abril de 2013
This is an excellent tool, worth every dime I paid for it. I am an armourer, blacksmith and metal artist and need to clip wires, nails and other items quite regularly. This tool makes it breeze and saves wear and tear on my hands. One of the best things I've ever spent money on.
Jan E. Downs
Comentado en los Estados Unidos el 8 de abril de 2013
This is an excellent tool, worth every dime I paid for it. I am an armourer, blacksmith and metal artist and need to clip wires, nails and other items quite regularly. This tool makes it breeze and saves wear and tear on my hands. One of the best things I've ever spent money on.
Jan E. Downs
Comentado en los Estados Unidos el 8 de abril de 2013
This is an excellent tool, worth every dime I paid for it. I am an armourer, blacksmith and metal artist and need to clip wires, nails and other items quite regularly. This tool makes it breeze and saves wear and tear on my hands. One of the best things I've ever spent money on.
Jan E. Downs
Comentado en los Estados Unidos el 8 de abril de 2013
This is an excellent tool, worth every dime I paid for it. I am an armourer, blacksmith and metal artist and need to clip wires, nails and other items quite regularly. This tool makes it breeze and saves wear and tear on my hands. One of the best things I've ever spent money on.
Productos recomendados
Mex $899.99
Mex $ 413 .00 Mex $413.00