No hay artículos en el carro
No hay artículos en el carroEl codo de suministro de pared cuenta con un diseño de perfil bajo, lo que permite que la conexión de la manguera de regadera de mano esté cerca de la pared. Su construcción de metal garantiza una larga durabilidad. -
NMP
Comentado en los Estados Unidos el 29 de diciembre de 2023
The chrome finish looks great. Inhale had one for over 5 years and still looks great. We bought more given the price, look and durability.
Jake Smith
Comentado en los Estados Unidos el 11 de enero de 2019
You won’t find a better built drop ell and for the price it’s pretty unbelievable.Solid brass with a super thick Nickel/Chrome plate.The provided nipple is slip fit with a grub retainer. It’s solid brass and 1/2” OD so it’s super easy to cut and shorten/lengthen if needed with a 1/2” coupling and MIP. Heavy piece that looks as good as it feels. I was able to fit this tight to a 3/4” wood panel by cutting the provided brass nipple and sweating on a 1/2” copper MIP close to the flange.The slip fit and grub retainer offer quite a bit of adjustment.
2perform
Comentado en Canadá el 16 de abril de 2019
Very happy with this product. Excellent quality as well! Just order it, wait to you receive and then dry-fit things while taking into consideration wall, tile and mortor thickness. After you are done tiling, it will install perfectly. Do NOT even try to go off the specs on Kohler and/or Amazon, you won’t be a happy camper....hence the negative reviews here.
Ace Cool
Comentado en los Estados Unidos el 11 de marzo de 2018
Realize that this product definitely needs to have a good deal of understanding. After purchasing it I get what comments are being said about it. Without a doubt, unless you can solder brass and copper, you need to know that the length of the nipple that this fitting comes with is very dependent on how far your shower fitting is set back. This adapter comes with a nipple that will fit a depth of 1 13/16 to 2 5/16" ( it might be 1 5/16 to 2 13/16" since the instructions have it both ways) setback from the face of the wall to the face of the female threads. What came would have left my fitting sticking out of the wall about 1" with the adjustable part all the way collapsed or in. You get about 1" of adjustment. Rather than order a new part, I cut the brass nipple down 1 1/4" with a pipe cutter and soldered on a 1/2" cu male adapter (the nipple OD is the same as 1/2" cu pipe). It worked perfectly. I realize that not everyone can do this so with that in mind, you might opt for another shower 90 suck as that made by Moen. This item from Kohler is S T O U T, very well made. If you do opt to cut it down or have a plumber do it, remove both o rings before you heat it up. One end of the nipple has two groves for o rings that fit in the 90, you cannot do anything about that, the other end has a machined 1/2" pipe thread.
Every Day Carry Gear and other reviews
Comentado en Canadá el 24 de junio de 2016
This is the 4th one I bought, in different finishes.IT simply looks great and it performs.The pipe is long enough that the threaded piece can be behind the wall, it will go thru the tile, the mortar, the drywall/or waterproofing board and still have enough.Solid and heavy brass construction with a 1/2" outlet. - The first one has been in use for over 3 years without a complaint.
Productos recomendados
Mex $691.85
Mex $ 352 .00 Mex $352.00
Mex $373.08
Mex $ 179 .00 Mex $179.00
Mex $55.01
Mex $ 30 .00 Mex $30.00
Mex $1,332.44
Mex $ 572 .00 Mex $572.00