No hay artículos en el carro
No hay artículos en el carro Kits de elevación de nivelación de rendimiento KSP/kits de caída diff con alta calidad y satisfacción 100% El artículo incluye:
1. 2 espaciadores de caída diferenciales.
2. 2 espaciadores de caída de placa deslizante.
3. 1 kit de herramientas. KSP Performance Diff Drop reducirá el diferencial delantero de tu camión, reducirá los ángulos en tus ejes y botas de c.v. lo que puede ayudar a prolongar la vida útil de estos componentes. Este kit es de aluminio T6 mecanizado CNC de precisión para un ajuste perfecto después de instalar un kit de elevación de nivelación frontal de 2 a 3 pulgadas. Fácil instalación atornillada de aproximadamente 1 a 2 horas, no necesita herramientas especiales.
Diomedes Martinez
Comentado en los Estados Unidos el 2 de abril de 2025
Era lo que pedí yego en el tiempo que esperaba
jose martinez
Comentado en los Estados Unidos el 8 de septiembre de 2024
I installed this drop kit in less than 10 minutes22mm socket19mm wrench for old hardwareThen will need22mm socket and7/8 wrench to installThis kit cost only $20 and it’ll save you $$$ by putting less stress in front differential of Tacoma 4x4
ldev
Comentado en Canadá el 18 de marzo de 2022
Fits my 2003 toyota 4runner.After install, not much of a difference in the axle angle (3inch lift) but better than having full stress on the lifted axle.
Ryan Jones
Comentado en los Estados Unidos el 30 de enero de 2022
The installation was pretty easy, no real instructions, but it's pretty obvious though. However, while it came with two bolts that were longer to allow the skid plate to reach after the spacers were put in. But, it needs two more longer bolts for the back skid plate. It isn't a deal breaker, but it was kinda annoying to have to go get one. You also need two more spacers, or, 4 larger nuts to go over the bolts to make a spacer. I wish I had pictures, but didn't think about it until I was finished with the installation.
Darylrl
Comentado en Canadá el 15 de marzo de 2021
Just installed this kit.1. Main bolts that hold the diff up are marginally long enough. If I used the washer provided the threads would not protrude the nut! So the nylock bolt would be of no use unless you omit the washer.2. The smaller spacers provided to shim the skid plate down are of no use. They are approx 1/4” thick. You need a spacer that should be the same thickness as the large spacers.3. There were NO instructions in the kit. Not a problem for me but for some it may be an issue.4. You will no longer be able to use the jack point on the skid plate as the kit spaces it away and provides no shim or suggestion to fill the space. Instructions or a mention of this on the sale page would have been nice!.....so I am now unable to run my skid plate till I get shims/washers to take up the space.I do not recommend this kit, to anyone. If it was in its allowable return timeframe, it would be returned!
Productos recomendados
Mex $5,093.16
Mex $ 1,881 .00 Mex $1,881.00
Mex $3,198.09
Mex $ 1,567 .00 Mex $1,567.00
Mex $8,360.42
Mex $ 1,881 .00 Mex $1,881.00
Mex $5,643.29
Mex $ 1,881 .00 Mex $1,881.00