No hay artículos en el carro
No hay artículos en el carroThis is a set of 24/40 glassware for distillation in lab, product loss is by compact design. With a 10/18 outer joint to accept thermometers calibrated for 75mm immersion. The distributing adapter consists of a single 24/40 outer joint and three 24/40 inner joints to accept three 50mL round bottom receivers. The receivers are held in place with plastic clamps. Including: 1.Distillation head, short path with 24/40 joint, with a 10/18 outer joint to accept thermometers calibrated for 75 mm immersion.one piece design for easy set up. 2.Distributing adapter, distillation receiver, with the24/40 outer and inner joints at 135 degree angle. 3.50mL round bottom flask with24/40 joint 3 pcs 4.250mL 2 neck flask, heavy wall design, with 24/40 joint, 1 pcs. 5.plastic joint clip, 24/40, for standard taper joint.(Pack of 6) 6.thermometer adapter, 24/40 joint. 1pcs 7.Bleeding tube.2pcs.
Damon
Comentado en los Estados Unidos el 5 de agosto de 2022
It works great for a first time user
Joshua
Comentado en los Estados Unidos el 10 de julio de 2020
The ad is misleading. The following are listed as included, but are not:"A bleed tube, A kerosene thermometer with 10/18 joint"You cannot run this distillation head without either a thermometer or stop for the joint at the top of the head and neither is included here.What is included:1 - Distillation head with 2 vigreaux, 2 - 24/40 joints, 10/18 thermometer joint1 - 250ml round bottom boiling flask, 2 - 24/40 joints1 - Triple Cow adapter with 24/40 joints3 - 50ml round bottom receiving flasks with 24/40 joints1 - Straight Thermometer 200C. No joint on thermometer1 - 24/40 thermometer adapter6 - Joint Clips.The advertisement lists the contents as:This set includes a short path distillation head with 24/40 inner joints;A rotation cow receiver with 3 24/40 inner joints;;3 pcs 50mL round bottom flasks with 24/40 joints;A two neck 250mL round bottom flask with 24/40 joint used as a distillation flask;A 24/40 thermometer adapter to fit a bleed tube;A bleed tube;A kerosene thermometer with 10/18 joint;6 pcs 24# joint clips.**updatedHaving sourced by own replacements for the missing items, I have been using the equipment.It has performed satisfactorily and I have improved my rating to reflect the acceptable function of the item itself. Had I not had issues with the missing items, I would have given 5 stars.
OneEyeWilly
Comentado en los Estados Unidos el 20 de enero de 2020
Looks like pretty good quality glassware there’s a few bubbles here and their glass joints are a little bit rougher than usual especially on the tips that protrude into the flasks. Seems like the angle on the distillation head is off saw several drops dripping off of the thermometer back into the pot had to raise the temperature is way higher than I would’ve liked to in order to get stuff to raise into the distillation head.
Ian McDonald
Comentado en los Estados Unidos el 15 de agosto de 2018
Like everything else I have ordered from Laboy, this arrived intact and with all parts. The only part that seems dodgy is the thermometer adapter, as the threads do not mesh quite as well as one might hope, but if you pay attention it fits, and in my case maintained vacuum without issue. I have other products by Laboy so yes I will paste this into those for which it applies.
Cookie Monster
Comentado en los Estados Unidos el 24 de agosto de 2017
Thermometer adaptor arrived with the wrong gasket. I'll have to wait another 3 weeks for a replacement. Glass ware arrived ok. Appears to be high quality but should come with a plug for the double neck flask in case the thermometer doesn't fit the gasket
Productos recomendados
Mex $462.98
Mex $ 208 .00 Mex $208.00
Mex $425.18
Mex $ 216 .00 Mex $216.00
Mex $150.33
Mex $ 75 .00 Mex $75.00
Mex $711.07
Mex $ 348 .00 Mex $348.00
Mex $500.82
Mex $ 265 .00 Mex $265.00