No hay artículos en el carro
No hay artículos en el carroLa extensa línea de módulos a presión de Leviton permite una configuración completa de campo para el instalador. Las carcasas Leviton QuickPort, como placas de pared, carcasas MOS y placas frontales modulares para muebles, se pueden configurar con una combinación personalizada de módulos QuickPort que encajan fácilmente dentro o fuera de los puertos. Caja trasera de montaje en superficie, doble banda, blanco, profundidad de la caja es de 1.45 pulgadas.
Ash
Comentado en los Estados Unidos el 21 de febrero de 2025
Worked for my needs. I installed carefully as it seemed like it would break easily.
NDRobinson
Comentado en Canadá el 3 de enero de 2025
Used to house an HDMI and Ethernet run that terminated where we weren't able to flush-mount the outlets. It's a standard double-gang box so standard brush plates and outlet covers fit as expected. Quick solution that looks clean and avoided the need to fabricate something.
Alex Niculaie
Comentado en Canadá el 12 de febrero de 2024
If you live in you're granny's basement and the electric box is smaller than your budget for a new home this is what you need to fit a big 🍑 smart switch.
miguel angel hernandez
Comentado en México el 29 de noviembre de 2023
Excelente producto de alta calidad y buen precio. Lo recomiendo ampliamente.
Psychofisherman
Comentado en los Estados Unidos el 24 de abril de 2021
Easy to install over an existing outlet. I used this 2 gang to install a deep dimmer switch that wouldn't fit in the old metal 1 gang box. This attaches to the old box with use of the provided screws into the old switch mount holes. I centered it for looks, but it slides when pushed hard, but that's not biggy. The back plate attaches first, after you have cut out the back slot to allow your wires through. Once it's mounted you press on the box, do your wiring, attach the new deep switch...botta bing, your now ready to install the faceplate. This 2 gang box is very versatile. I highly recommend it if you need to install a deep dimmer, and have no room to do so. I went with the 2 gang, because it was thinner than the single gang, but would still allow installation of the switch. Plus it is more appealing to the eye, over a bigger single gang box.
Josh
Comentado en los Estados Unidos el 12 de diciembre de 2020
I used this outlet box to install a set of outlets onto the front of a control enclosure.Since that's not exactly what these boxes were designed for, I'd say that it did the job just fine, and is a testament to the versatility of these backboxes.There are knockouts all over this thing for finding ways to get your wires into it. All four sides have multiple punch-out options, and the back also has three punchouts.Speaking of the back panel, you have countless mounting options and screw holes for attaching the box to your wall, enclosure, or other place of electrical interest.While running your wires, remember that this is a nonmetallic enclosure, and you will need to make sure you have ground available on both outlets. It's not going to do it for you.The only knock I can give this box is that because of its low profile design, you don't have a whole lot of room to work inside and run your wires, especially for heavier 12ga installations.Installing a GFCI and a USB charger outlet left me with very little space to run the wiring, and it felt cramped, but that's the price to pay for putting that much outlet into a box this small.
Productos recomendados
Mex $157.00
Mex $ 84 .00 Mex $84.00
Mex $442.15
Mex $ 229 .00 Mex $229.00
Mex $399.99
Mex $ 187 .00 Mex $187.00