Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

M12 x 1.0 - Grifo de mano métrico para mano derecha M12 x 1.0 mm, 1 par

4.3 (40) Escribir comentario
Envío gratis en pedidos superiores a Mex $600.00

Mex $785.05

Mex $ 368 .00 Mex $368.00

En stock
  • Tamaño: longitud: 80 mm, cabeza de rosca: 22 mm, cabeza cuadrada: 7,1 mm x 7,1 mm (largo x ancho), diámetro del vástago: 9,0 mm, paso: 1,0 mm.
  • Características: diseño de rosca estándar, hecho de aleación de acero para herramientas con alta dureza y dureza.
  • Aplicación: haz o reparación de rosca, adecuado para la mayoría de metales, aleación de acero, hierro fundido, etc.
  • Uso: se utiliza principalmente para uso manual, la adición adecuada de refrigerante puede prolongar la vida útil al golpear.
  • El paquete incluye: 1 par de roscas métricas M12 x 1 mm.


Descripción del producto

llave Thraed

Dirección de corte: Mano derecha.

Material: Aleación de acero para herramientas.

Rosca de flauta recta con diseño de flauta recta, utilizado para agujero pasante y agujero ciego poco profundo, no para golpear agujeros ciegos.

Consejos

Antes de tocar, confirma si el diámetro del agujero redondo es adecuado y toma medidas de protección cuando trabajas. Al golpear, es necesario añadir agua o refrigerante para enfriarse para evitar la temperatura excesiva y reducir la pérdida del llave. Si encuentra dificultades en la rotación, el golpeteo debe suspenderse. Asegúrate de seleccionar el aceite de corte adecuado para el complejo proceso de roscado y aplicar aceite antioxidante para el mantenimiento después de su uso.

Aceteel

Melody
Comentado en los Estados Unidos el 26 de marzo de 2025
great size and came with no bends
Tahitian pearls
Comentado en los Estados Unidos el 31 de enero de 2025
Great price for a great tray by a great company for the 420 ppl I love
Thomas Piper
Comentado en los Estados Unidos el 26 de agosto de 2024
I needed a M12-1 tap to chase a thread on my wife's exercise bike. These are high quality, well ground taps. I was a tool and gage maker for 50+ years.
Thomas Piper
Comentado en los Estados Unidos el 26 de agosto de 2024
I needed a M12-1 tap to chase a thread on my wife's exercise bike. These are high quality, well ground taps. I was a tool and gage maker for 50+ years.
Thomas Piper
Comentado en los Estados Unidos el 26 de agosto de 2024
I needed a M12-1 tap to chase a thread on my wife's exercise bike. These are high quality, well ground taps. I was a tool and gage maker for 50+ years.
Thomas Piper
Comentado en los Estados Unidos el 26 de agosto de 2024
I needed a M12-1 tap to chase a thread on my wife's exercise bike. These are high quality, well ground taps. I was a tool and gage maker for 50+ years.
Thomas Piper
Comentado en los Estados Unidos el 26 de agosto de 2024
I needed a M12-1 tap to chase a thread on my wife's exercise bike. These are high quality, well ground taps. I was a tool and gage maker for 50+ years.
Thomas Piper
Comentado en los Estados Unidos el 26 de agosto de 2024
I needed a M12-1 tap to chase a thread on my wife's exercise bike. These are high quality, well ground taps. I was a tool and gage maker for 50+ years.
Thomas Piper
Comentado en los Estados Unidos el 26 de agosto de 2024
I needed a M12-1 tap to chase a thread on my wife's exercise bike. These are high quality, well ground taps. I was a tool and gage maker for 50+ years.
Thomas Piper
Comentado en los Estados Unidos el 26 de agosto de 2024
I needed a M12-1 tap to chase a thread on my wife's exercise bike. These are high quality, well ground taps. I was a tool and gage maker for 50+ years.
DoxieDad_101
Comentado en los Estados Unidos el 13 de agosto de 2024
I'm a mechanic at a BMW motorcycle dealership. On occasion I see BMWs come in with buggered final drive threads due to ham fisted servicing. The taper tap to start and the plug tap to finish and we are good to go again.
DoxieDad_101
Comentado en los Estados Unidos el 13 de agosto de 2024
I'm a mechanic at a BMW motorcycle dealership. On occasion I see BMWs come in with buggered final drive threads due to ham fisted servicing. The taper tap to start and the plug tap to finish and we are good to go again.
DoxieDad_101
Comentado en los Estados Unidos el 13 de agosto de 2024
I'm a mechanic at a BMW motorcycle dealership. On occasion I see BMWs come in with buggered final drive threads due to ham fisted servicing. The taper tap to start and the plug tap to finish and we are good to go again.
DoxieDad_101
Comentado en los Estados Unidos el 13 de agosto de 2024
I'm a mechanic at a BMW motorcycle dealership. On occasion I see BMWs come in with buggered final drive threads due to ham fisted servicing. The taper tap to start and the plug tap to finish and we are good to go again.
DoxieDad_101
Comentado en los Estados Unidos el 13 de agosto de 2024
I'm a mechanic at a BMW motorcycle dealership. On occasion I see BMWs come in with buggered final drive threads due to ham fisted servicing. The taper tap to start and the plug tap to finish and we are good to go again.
DoxieDad_101
Comentado en los Estados Unidos el 13 de agosto de 2024
I'm a mechanic at a BMW motorcycle dealership. On occasion I see BMWs come in with buggered final drive threads due to ham fisted servicing. The taper tap to start and the plug tap to finish and we are good to go again.
DoxieDad_101
Comentado en los Estados Unidos el 13 de agosto de 2024
I'm a mechanic at a BMW motorcycle dealership. On occasion I see BMWs come in with buggered final drive threads due to ham fisted servicing. The taper tap to start and the plug tap to finish and we are good to go again.
DoxieDad_101
Comentado en los Estados Unidos el 13 de agosto de 2024
I'm a mechanic at a BMW motorcycle dealership. On occasion I see BMWs come in with buggered final drive threads due to ham fisted servicing. The taper tap to start and the plug tap to finish and we are good to go again.
Reviewer
Comentado en los Estados Unidos el 26 de diciembre de 2024
For the price this is a great looking tray
Michael Laverdure
Comentado en los Estados Unidos el 1 de diciembre de 2024
Used this to clean up some threads on a blind hole. Having the bottoming tap helped a lot and it got all the way to the bottom. Would but this brand again if I need it in a different size.
Michael Laverdure
Comentado en los Estados Unidos el 1 de diciembre de 2024
Used this to clean up some threads on a blind hole. Having the bottoming tap helped a lot and it got all the way to the bottom. Would but this brand again if I need it in a different size.
Michael Laverdure
Comentado en los Estados Unidos el 1 de diciembre de 2024
Used this to clean up some threads on a blind hole. Having the bottoming tap helped a lot and it got all the way to the bottom. Would but this brand again if I need it in a different size.
Michael Laverdure
Comentado en los Estados Unidos el 1 de diciembre de 2024
Used this to clean up some threads on a blind hole. Having the bottoming tap helped a lot and it got all the way to the bottom. Would but this brand again if I need it in a different size.
Michael Laverdure
Comentado en los Estados Unidos el 1 de diciembre de 2024
Used this to clean up some threads on a blind hole. Having the bottoming tap helped a lot and it got all the way to the bottom. Would but this brand again if I need it in a different size.
Michael Laverdure
Comentado en los Estados Unidos el 1 de diciembre de 2024
Used this to clean up some threads on a blind hole. Having the bottoming tap helped a lot and it got all the way to the bottom. Would but this brand again if I need it in a different size.
Michael Laverdure
Comentado en los Estados Unidos el 1 de diciembre de 2024
Used this to clean up some threads on a blind hole. Having the bottoming tap helped a lot and it got all the way to the bottom. Would but this brand again if I need it in a different size.
Michael Laverdure
Comentado en los Estados Unidos el 1 de diciembre de 2024
Used this to clean up some threads on a blind hole. Having the bottoming tap helped a lot and it got all the way to the bottom. Would but this brand again if I need it in a different size.
Customer
Comentado en los Estados Unidos el 7 de noviembre de 2024
Amazing quality and amazing seller
junglecat72
Comentado en los Estados Unidos el 5 de noviembre de 2024
Nice product
Ken Stein
Comentado en los Estados Unidos el 17 de abril de 2024
I bought this set to clean up some badly damaged crank flange bolt holes on a 1.6L Miata engine and they worked great for recutting the smashed threads at the start of each hole and cleaning out the existing threads at the back. I am more than pleased. I expect they will work well in aluminum as well, less certain of cutting fresh threads in steel or iron but I will update after I do that eventually.
Ken Stein
Comentado en los Estados Unidos el 17 de abril de 2024
I bought this set to clean up some badly damaged crank flange bolt holes on a 1.6L Miata engine and they worked great for recutting the smashed threads at the start of each hole and cleaning out the existing threads at the back. I am more than pleased. I expect they will work well in aluminum as well, less certain of cutting fresh threads in steel or iron but I will update after I do that eventually.
Ken Stein
Comentado en los Estados Unidos el 17 de abril de 2024
I bought this set to clean up some badly damaged crank flange bolt holes on a 1.6L Miata engine and they worked great for recutting the smashed threads at the start of each hole and cleaning out the existing threads at the back. I am more than pleased. I expect they will work well in aluminum as well, less certain of cutting fresh threads in steel or iron but I will update after I do that eventually.
Ken Stein
Comentado en los Estados Unidos el 17 de abril de 2024
I bought this set to clean up some badly damaged crank flange bolt holes on a 1.6L Miata engine and they worked great for recutting the smashed threads at the start of each hole and cleaning out the existing threads at the back. I am more than pleased. I expect they will work well in aluminum as well, less certain of cutting fresh threads in steel or iron but I will update after I do that eventually.
Ken Stein
Comentado en los Estados Unidos el 17 de abril de 2024
I bought this set to clean up some badly damaged crank flange bolt holes on a 1.6L Miata engine and they worked great for recutting the smashed threads at the start of each hole and cleaning out the existing threads at the back. I am more than pleased. I expect they will work well in aluminum as well, less certain of cutting fresh threads in steel or iron but I will update after I do that eventually.
Ken Stein
Comentado en los Estados Unidos el 17 de abril de 2024
I bought this set to clean up some badly damaged crank flange bolt holes on a 1.6L Miata engine and they worked great for recutting the smashed threads at the start of each hole and cleaning out the existing threads at the back. I am more than pleased. I expect they will work well in aluminum as well, less certain of cutting fresh threads in steel or iron but I will update after I do that eventually.
Ken Stein
Comentado en los Estados Unidos el 17 de abril de 2024
I bought this set to clean up some badly damaged crank flange bolt holes on a 1.6L Miata engine and they worked great for recutting the smashed threads at the start of each hole and cleaning out the existing threads at the back. I am more than pleased. I expect they will work well in aluminum as well, less certain of cutting fresh threads in steel or iron but I will update after I do that eventually.
Ken Stein
Comentado en los Estados Unidos el 17 de abril de 2024
I bought this set to clean up some badly damaged crank flange bolt holes on a 1.6L Miata engine and they worked great for recutting the smashed threads at the start of each hole and cleaning out the existing threads at the back. I am more than pleased. I expect they will work well in aluminum as well, less certain of cutting fresh threads in steel or iron but I will update after I do that eventually.
Uri Stolar
Comentado en México el 17 de agosto de 2020
Es un pequeño detalle pero el esmalte se raya con casi cualquier cosa y si lo ves a contraluz siempre se verán las marcas. También el dibujo de la charola tiene unos hilos como de cuerda o cáñamo y te puede hacer pensar que la charola está sucia o tiene algún pelo o hilo, sobre todo si tienes animales.
MarioAMM1
Comentado en México el 29 de julio de 2020
Más grande de lo que esperaba, excelente material, espesor e impresión. Me costó 260 pesos y es una excelente propuesta calidad/precio.
Carlos Collada
Comentado en México el 12 de septiembre de 2020
No he recibido mi devolución hace 49 días.
Productos recomendados
Grifos métricos estriados, 5 piezas de llave y troquel métrico Hss, llave de rosca de flauta recta métrica, tornillo Hss chapado en acero de alta velocidad para roscas de tornillo M3 M4 M5 M6 M8

Mex $234.00

Mex $ 119 .00 Mex $119.00

4.7
Elegir
Combinación de machihembrado Recto, sin rebaba M1 a M3.5 Machuelo Manual de máquina con 10 tamaños para roscar Varios Hilos, diseño de Hilo estándar

Mex $194.00

Mex $ 110 .00 Mex $110.00

5.0
Elegir
uxcell M2 X 0,4 Espiral Punta Rosca Macho Y 1,6mm Taladro Juego, Métrico Titanio Chapado Cobalto Alta Velocidad Acero Máquina Tornillo Rosca Macho Roscado Herramienta

Mex $596.28

Mex $ 286 .00 Mex $286.00

4.8
Elegir
2 grifos de máquina M3 x 0.5, herramienta de roscado M3 de rosca métrica, 3 flautas rectas de fresado (M3 x 0.5)

Mex $240.00

Mex $ 124 .00 Mex $124.00

4.4
Elegir
uxcell Máquina Grifo 1/4-20 UNC Paso Rosca 3 Flautas Revestimiento Titanio HSS 2uds

Mex $365.49

Mex $ 168 .00 Mex $168.00

4.4
Elegir
Burkit Grifo de rosca M13 x 1 para mano derecha, HSS M13 x 1.0 recto estriado para máquina

Mex $265.93

Mex $ 159 .00 Mex $159.00

4.3
Elegir
10 Unids Mini M1 a M3.5 Tornillo Macho Roscado Roscado a Mano Roscas Métricas Juego de Espiral Punta Recta

Mex $224.00

Mex $ 114 .00 Mex $114.00

4.3
Elegir
Macho de Roscar con Punta Espiral Machos de Roscar de Acero de Alta Velocidad Macho de Rosca Métrica Rosca Grifo 10PCS (M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3. 5)

Mex $230.00

Mex $ 119 .00 Mex $119.00

5.0
Elegir