Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Manguera de ventilación para secadora fácil de instalar, conducto de 4 pulgadas de 6.56 pies, conducto de alta resistencia con 2 abrazaderas, conducto flexible de PVC de 4 capas y aluminio

Envío gratis en pedidos superiores a Mex $600.00

Mex $366.66

Mex $ 179 .00 Mex $179.00

En stock
  • Fácil instalación: los dos extremos de la manguera de ventilación para secadora de 4 pulgadas tienen rebanadas de 25 mm para una fácil conexión con ventiladores y accesorios, con 2 abrazaderas para fijar
  • Cuatro capas: estructura en espiral de alambre de acero, dos capas de conductos de papel de aluminio envuelto con una capa de PVC negro y una capa de película de PET en el exterior. Hace que el conducto de 4 pulgadas sea más duradero y resistente a fugas
  • Resistencia térmica: rango de resistencia a la temperatura de la manguera de secadora Drasum de -30 a 300 °F. (-30℃ - 150℃)
  • Amplias aplicaciones: diseñado para aplicaciones de ventilación, incluyendo HVAC, secadores, cocinas, baños, salas de cultivo y tiendas de campaña, invernaderos, etc.
  • 【Longitud ajustable】Tamaño del conducto: 4 pulgadas | Longitud: 6.5 pies | Se puede cortar la longitud de acuerdo a tus necesidades



Descripción del producto

1
  • Sí, ese es uno de los usos principales de la manguera de ventilación para secadora

  • Esto te permite conectar más fácilmente el conducto flexible a los ventiladores, secadores, accesorios, etc.

  • Sí, la capa más exterior de este conducto de 6 pulgadas es una capa de PVC negro con un efecto aislante

  • Se puede cortar a cualquier longitud si lo deseas

  • El conducto Drasun es adecuado para cualquier propósito de ventilación de calefacción y aire acondicionado (HVAC). Se moverá y entregará aire en cocinas, casas verdes y salas de cultivo, baños, salas de secado, conductos de tienda de cultivo y otras aplicaciones que tengas en mente


Gary Lofgren
Comentado en los Estados Unidos el 1 de enero de 2025
Working great on my diesel heater and very durable. The real pros for me with this hose is the exterior coating which durable so far and also makes it very easy to rinse off or clean for when I need to use my heater outside which can cause dirt to get on the hose. The second pro is that it collapses back down very easily for storage which is important in my case since I use it with a portable diesel heater and it never stays setup long term and is always getting packed away. Good value overall.
Dat
Comentado en Canadá el 26 de junio de 2024
This was pretty easy to install on the dryer but was extremely difficult to hook up to the exhaust vent. I saw the installers use a cleaner spray (in this case my pre-wash spray for clothes) as a lubricant and wished I knew this trick earlier as it might have made my install a lot easier!Overall, compared to what else is available out there, I would recommend this to anyone looking for a new dryer vent hose.
Rudy
Comentado en Canadá el 1 de junio de 2024
I looked in all the suppliers we have here out in the sticks and the only thing available was the aluminum dryer vent hose. I used that last time and it deformed and caused restrictions in the vent hose. The vent hose I bought from Amazon is great. It has a spring in it so it does not deform easily. It is insulated so the hose does not get hot. The outside has a rubber like coating which I guess makes it more durable. Comes with two hose clamps so you are good to go. All in all it is a great product.
kmotc
Comentado en los Estados Unidos el 4 de julio de 2023
Ok, first though not technically a feature, the packaging was so well designed, that this vent hose was not creased, dented or out of alignment on delivery. The hose is built like a slinky, which helps, but it was in a tight fitting, tall box and then in a plastic sleeve, with the hose clamps slipped over the hose but protected from being torn by them. Nice packing job!#1 The Best A+ No. 1 feature---the ends of the hose are reinforced with thick rings that make installation on the dryer pipe (which is sort of short and jagged) and onto whatever connection you have venting to the outside, incredibly easy. If you can see it in the picture, the reinforced part of the coating is thick enough you can fit the clamp ring over it and still have extra room. The extra thickness gives you room to fit it over the dryer pipe and then get the clamp over all of it, ensuring that the hose won't slip off as you put the dryer back in position. And it doesn’t look like it will start to lose its integrity when it comes time to remove the hose for cleaning. I anticipate the ends of the hose holding up.The reinforced bits are something that should be on every vent hose.Yes, most foil vent hoses have some bit of thickening or little ring at the end, but it’s not as substantial and it’s usually short and the foil tears away from it quite easily. This is a much better design.#2 The Accordion style pleats allow the rings of this hose to compress back on themselves, like a Slinky, so even at six feet you don't have to shorten the hose. Cutting hoses often messes up the structure and then the alignment of the hose goes off, and each time you have to detach or reattach the hose it gets harder to manage.#3 The substantial plastic coating on this hose really protects the internal foil part, so that it doesn't get torn when installing or moving it around when you move the dryer to clean.#4 Substantial clamp rings, packaged (again with the packaging!) so that they were not squashed or bent in transit and they didn’t tear the hose.I have learned from my past dryer vent hose mistakes. No more rigid metal hoses that get squashed and if you have to size them down, create structural problems and razor sharp edges. No more paper thin foil or plastic hoses that are easily torn and don't have the larger, reinforced ends.I have no complaints. This is a fantastic dryer hose, and I was motivated to get online and write a review right after installing it, because I hate working on the dryer and this was so easy it wasn't even workIf the manufacturer wanted to make the product even better they might substitute the clamp rings for the type with the little turn- key built in (I took one off another unit) then you wouldn't even need the one tool (the screwdriver) that's required to tighten the clamp rings. And maybe they could offer white or grey as color options. But that’s just picking nits.Great product!
Productos recomendados

Mex $814.00

Mex $ 398 .00 Mex $398.00

4.6
Elegir

Mex $330.00

Mex $ 168 .00 Mex $168.00

4.4
Elegir