No hay artículos en el carro
No hay artículos en el carroDescripción del producto
El paquete incluye:
- 2 cubiertas de válvula
- 2 juntas
- 20 tornillos
Número OE
13264-EA20013264-EA21013264EA20013264EA210
Características:
Combina con la alta temperatura y deformación OEMEesist. Fácil de instalar. Sello de bobina de encendido extraíble de repuesto
Problemas causados por una cubierta de válvula defectuosa
Humo de la tubería de cola. Alto consumo de aceite y bajo rendimiento del motor. El compartimento del motor hace un silbido daño
Compatible con
Motor: VQ40DE V6 4.0L2005-2019 NISSAN FRONTIER2012-2019 NISSAN NV15002012-2019 NISSAN NV25002012-2019 NISSAN NV35002005-2012 NISSAN PATHFFFIFIDER2005-2015 NISSAN XTERRA
Nuestros productos se han sometido a pruebas de durabilidad, pruebas de sellado, pruebas de temperatura y pruebas de presión antes de empacar y enviar. Cumple o supera los requisitos de calidad y rendimiento estándar OE.
Para reemplazos, por favor avísenos dentro de los 30 días posteriores a la recepción del artículo. Si tienes alguna pregunta sobre la tapa de la válvula, háznoslo saber
Utiliza el manual de taller adecuado para tu vehículo para obtener instrucciones de servicio específicas. Si no tienes un manual de instalación o no tienes suficiente habilidad para instalar esta pieza, se recomienda buscar la ayuda de un mecánico calificado.
John M.
Comentado en los Estados Unidos el 17 de febrero de 2025
Excellent Fit, Finish and function. These covers were Better than factory. Thanks for the great craftsmanship.
TimeBandit
Comentado en los Estados Unidos el 22 de julio de 2024
This review is about my experiences with the aluminum option (painted red) fit to a 2005 Nissan Frontier 4.0L. As the title states, I too had an issue pointed-out by another review. The passenger-side cover did not adhere to OEM specification on the coil bolt thread size – too big. It was machined with M8X1.25 course threading for the 3 top coil bolt mounts, and like the other reviewer, I too didn’t realize until AFTER I installed it. Strangely, the driver’s side was fine, as it has the correct M6X1.0 fine threads, permitting the reuse of the OEM bolts. So for the right side, I procured 3 larger bolts, which threaded perfectly into the cover. However, the now larger bolts would not pass through the coil bushing “eyes” – too big. This was nearly a show-stopper, yet I attempted what the other reviewer had done – to slightly bore-out the bushing larger. This worked, but let me say, you’ll need the right tools and know what you’re doing. This was tedious and sketchy work. A drill-press, 5/16 bit, lots of lube, slow/patience, and a steady hand to modify 3 OEM coils. Go too-fast drilling, and you’ll catch/spin the bushing right out of the coil body. I was successful, but moving forward with keeping this product means this frankenstein coil-bolt mismatch means I’ll have to forever bore-out replacement coils - if ever the day.Shipping was fast, well packed. One small paint defect noted. There was a slight chip on the top near the decal sticker. This could have occurred during shipping, yet again, the packaging was done well, insulated, padded, saw no evidence of red paint flakes loose, so I’m assuming these were shipped already having the paint defect. No biggie - I had some red caliper paint, and did a quick touch-up - solved.These are well made, strong, durable. I noticed there are plastic baffles on the inside, and all those many many screws holding them in-place, which initially concerned me, as it’s never a good idea to have inward-facing screws that could vibrate out and fall into the engine. Sooooooo ... I decided to remove one baffle for investigative purposes. YES - there was indeed some adhesive material to add friction to these screws, so they shouldn’t work-loose on their own. I added lock-tight, and reinstalled the baffle. I like that these came with a new PVC valve and gaskets. Install went smooth (aside from the right cover issue) and the covers look great. The fit to the engine was perfect, all lined-up like OEM, once bolted-down, all seemed very professional. I did not reach out to the seller, as I made the choice to work-around/solve the unexpected issues on my own. Overall, I am satisfied, but decided on a lower rating due to the covers not being true to stated compatible vehicle-fit (aka the coil bolt issue).
Jen
Comentado en los Estados Unidos el 5 de junio de 2024
The brim of the hat is wide enough to block sunlight from face and a bit of the neck area. The fabric is good quality. This hat is good for sunny days with absolutely no wind. If there is even the tiniest bit of wind, it’s a goner. Tying the string around the chin area prevents the hat from being blown off by the wind. However, the brim is so flimsy that even a tiny bit of wind blows it upward, exposing the face to the sun, or changes the shape of the hat, blocking your vision. The hat doesn’t stay in place by itself. I had to use both hands to constantly hold down the side of the hat or the front of the hat in order to prevent it from exposing my face to the sun and from blocking my vision.
jai barron
Comentado en Canadá el 24 de mayo de 2024
Was a little skeptical considering its a Chinese Product, but they felt good, install was easy, all the bolts were right, no leaks and looks good in the engine bay
Customer
Comentado en los Estados Unidos el 27 de marzo de 2024
It’s very cheaply made. Not worth the price I paid. Sorry for the bad review but this is a waste of money. I will return.
MICHAEL
Comentado en los Estados Unidos el 18 de marzo de 2024
Valve covers worked and fit as expected. Came with everything needed. Looks great. Only complaint, one screw on the baffle was not screwed in all the way but was tight. Easy to fix. I verified all the other screws were tight.
Laurie A West
Comentado en los Estados Unidos el 31 de diciembre de 2024
Fantastic hat! Keeps the sun off my face and neck! Travels well.
Britt
Comentado en los Estados Unidos el 6 de noviembre de 2024
I wore this when we went raspberry picking and this hat kept all the heat in. It's not very breathable. It was big enough to keep the sun off my whole face but after some time I had to take it off it was like wearing a beanie. It is very cute, and well made but very hot. I would still use it though because it does provide good sun protection; I just have to be careful with taking it off every so often to allow my head to breathe. Besides, it's a cute design and I paid good money for it so I have to use it lol
MJF
Comentado en los Estados Unidos el 23 de noviembre de 2024
I wish I could say it was perfect. It was close though. Beautiful product. Correct fit. Came with all the seals. The one I received has the wrong size screw holes on the left cover for the spark coil screws. Now I have to go buy some screws that fit. The right side was correct. All in all a good product though.
Mam
Comentado en los Estados Unidos el 20 de octubre de 2024
Im 50. Love this hat! Great to shade face, reversible, has tie for under chin. I HIGHLY recommend this wide brim hat as I used it on a cruise (and even in the pool). You will be noticed, but if your shy don't worry you can bend the brim to where you don't see others looking at you. Hat is adoreable!!!!
Productos recomendados
Mex $202.00
Mex $ 115 .00 Mex $115.00
Mex $866.00
Mex $ 467 .00 Mex $467.00
Mex $603.77
Mex $ 326 .00 Mex $326.00
Válvula solenoide de purga de vapor de emisiones evaporativas 911-409 compatible con Chevy B.u.i.c.k
Mex $435.99
Mex $ 217 .00 Mex $217.00
Mex $459.65
Mex $ 252 .00 Mex $252.00