Duane McGarry

Comentado en los Estados Unidos el 9 de mayo de 2025

Perfect tablecloths for our daughters princess party. Solid, thick, and not cheap ones. Lasted through all the tug and tear of little ones

Elizabeth

Comentado en los Estados Unidos el 7 de mayo de 2025

Justo lo que esperaba

Sarah

Comentado en los Estados Unidos el 14 de mayo de 2025

The 3-pack of plastic tablecloths was much higher quality than a dollar store one. They were shiny and could be reused, depending on your situation (splattered with food--toss; on a gift table--keep). The mottled color design was pretty and would complement many other colors.The gold castles aren't real glitter but do stand out. However, the design is such that you have to pull the tablecloth forward on one side to see the whole castle; if you center the tablecloth, the tops of the towers won't drape down (they'll be on the top of the table, with the bulk of the castle hanging down).I was happy with the quality, thickness, and princessy look of these tablecloths!

EP Petits Moteurs

Comentado en Canadá el 5 de marzo de 2025

GOOD QUALITY PART LIKE ALWAYS

EP Petits Moteurs

Comentado en Canadá el 5 de marzo de 2025

GOOD QUALITY PART LIKE ALWAYS

EP Petits Moteurs

Comentado en Canadá el 5 de marzo de 2025

GOOD QUALITY PART LIKE ALWAYS

EP Petits Moteurs

Comentado en Canadá el 5 de marzo de 2025

GOOD QUALITY PART LIKE ALWAYS

EP Petits Moteurs

Comentado en Canadá el 5 de marzo de 2025

GOOD QUALITY PART LIKE ALWAYS

EP Petits Moteurs

Comentado en Canadá el 5 de marzo de 2025

GOOD QUALITY PART LIKE ALWAYS

EP Petits Moteurs

Comentado en Canadá el 5 de marzo de 2025

GOOD QUALITY PART LIKE ALWAYS

EP Petits Moteurs

Comentado en Canadá el 5 de marzo de 2025

GOOD QUALITY PART LIKE ALWAYS

Jill

Comentado en los Estados Unidos el 31 de marzo de 2025

Great value. Used them for my daughters birthday party

bigboyjon

Comentado en los Estados Unidos el 2 de febrero de 2025

Made in USA. After 170,000 miles it was time to redo my front end on my 1999 silverado. The hard part was getting old part off. Tip you need 34mm socket and a impact, pitman arm puller and I had to use a cut off wheel on a die grinder. Looks like quality part, greasable and came with what's pictured in description.

bigboyjon

Comentado en los Estados Unidos el 2 de febrero de 2025

Made in USA. After 170,000 miles it was time to redo my front end on my 1999 silverado. The hard part was getting old part off. Tip you need 34mm socket and a impact, pitman arm puller and I had to use a cut off wheel on a die grinder. Looks like quality part, greasable and came with what's pictured in description.

bigboyjon

Comentado en los Estados Unidos el 2 de febrero de 2025

Made in USA. After 170,000 miles it was time to redo my front end on my 1999 silverado. The hard part was getting old part off. Tip you need 34mm socket and a impact, pitman arm puller and I had to use a cut off wheel on a die grinder. Looks like quality part, greasable and came with what's pictured in description.

bigboyjon

Comentado en los Estados Unidos el 2 de febrero de 2025

Made in USA. After 170,000 miles it was time to redo my front end on my 1999 silverado. The hard part was getting old part off. Tip you need 34mm socket and a impact, pitman arm puller and I had to use a cut off wheel on a die grinder. Looks like quality part, greasable and came with what's pictured in description.

bigboyjon

Comentado en los Estados Unidos el 2 de febrero de 2025

Made in USA. After 170,000 miles it was time to redo my front end on my 1999 silverado. The hard part was getting old part off. Tip you need 34mm socket and a impact, pitman arm puller and I had to use a cut off wheel on a die grinder. Looks like quality part, greasable and came with what's pictured in description.

bigboyjon

Comentado en los Estados Unidos el 2 de febrero de 2025

Made in USA. After 170,000 miles it was time to redo my front end on my 1999 silverado. The hard part was getting old part off. Tip you need 34mm socket and a impact, pitman arm puller and I had to use a cut off wheel on a die grinder. Looks like quality part, greasable and came with what's pictured in description.

bigboyjon

Comentado en los Estados Unidos el 2 de febrero de 2025

Made in USA. After 170,000 miles it was time to redo my front end on my 1999 silverado. The hard part was getting old part off. Tip you need 34mm socket and a impact, pitman arm puller and I had to use a cut off wheel on a die grinder. Looks like quality part, greasable and came with what's pictured in description.

bigboyjon

Comentado en los Estados Unidos el 2 de febrero de 2025

Made in USA. After 170,000 miles it was time to redo my front end on my 1999 silverado. The hard part was getting old part off. Tip you need 34mm socket and a impact, pitman arm puller and I had to use a cut off wheel on a die grinder. Looks like quality part, greasable and came with what's pictured in description.

MD28

Comentado en los Estados Unidos el 18 de abril de 2025

These are really nice. Big enough for a large table and cute

Mr. B

Comentado en los Estados Unidos el 12 de noviembre de 2024

Fit right , operates normally!

Mr. B

Comentado en los Estados Unidos el 12 de noviembre de 2024

Fit right , operates normally!

Mr. B

Comentado en los Estados Unidos el 12 de noviembre de 2024

Fit right , operates normally!

Mr. B

Comentado en los Estados Unidos el 12 de noviembre de 2024

Fit right , operates normally!

Mr. B

Comentado en los Estados Unidos el 12 de noviembre de 2024

Fit right , operates normally!

Mr. B

Comentado en los Estados Unidos el 12 de noviembre de 2024

Fit right , operates normally!

Mr. B

Comentado en los Estados Unidos el 12 de noviembre de 2024

Fit right , operates normally!

Mr. B

Comentado en los Estados Unidos el 12 de noviembre de 2024

Fit right , operates normally!

Marcel