Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

MOOG AMGK90474 Juego para ajuste de camber

Envío gratis en pedidos superiores a Mex $600.00

Mex $373.74

Mex $ 190 .00 Mex $190.00

En stock
  • Permite un rango de ajuste de 1 a 1 grados negativo.
  • Permite el rango de ajuste de 1 a 1 grado negativo.
  • Permite el rango de ajuste de 1 a 1 grado negativo.


MOOG ha ganado su reputación en la industria como el producto de chasis para resolver problemas, al introducir constantes mejoras en los diseños que extienden la vida útil y simplifican la instalación. Algunas aplicaciones de este producto son: Acura:1.7 EL(2001-2002),CSX (2006-2011),RSX(2002); Audi:Cabriolet(1994-1998); (More).


GB
Comentado en los Estados Unidos el 18 de marzo de 2024
Camber on my 2016 Tucson 1.6T was off half a degree. Took out top bolt. Without moving anything slipped in new bolt. I needed positive camber so tab facing away from the car. Installed the plus on the bolt faced inward. Keep in mind this is with no adjustment so you'd expect that as installed this way it is ready to be adjusted and not changing anything. I torqued the new bolt to 100 ft lbs with no adjustment. Then I broke loose the lower bolt and spun it around to make sure the shop would not have any issues with it then I torqued it back to 100 ft lbs without moving anything. So basically on purpose kept everything in the same original position. This made the car "ready" to get an alignment and have the ability to adjust to add positive camber. Took it to the shop and advised I added a camber bolt so they could adjust that half a degree away. They re-checked alignment and used the camber bold to add half a degree positive camber. They had to slightly adjust other variables due to the change. End result alignment is green now and everything is in good shape. My advise is don't change your camber when you install this. Let the shop do that. Your saving money by installing the bolt. Don't guess what changes to make and keep in mind any change alters other parts slightly. So even if you fix your camber the other alignments need adjusted and you can't do that unless you are the shop.
gordon moore
Comentado en Canadá el 30 de octubre de 2024
good quality
Peter W. Tong
Comentado en los Estados Unidos el 17 de septiembre de 2024
worked perfectly on my 2007 Hyundai Santa Fe.One thing to be aware of for vehicles in rust belt/high salt areas.When you install these, make sure to fill the void in the steering knuckle that would otherwise have been filled with the stock bolt with anti-seize paste. If you do not do that, moisture can get in that area and start a rusting process which can then culminate with the camber bolt freezing in position in the knuckle. If this happens no amount of persuasion will get that bolt out. You will have to Sawzall it out, and then drill it out or burn it out.
Tito leonel Alvarez
Comentado en México el 25 de mayo de 2023
Muy buena atención. Entrega muy puntual. Producto de excelente calidad
Rodolfo
Comentado en México el 30 de diciembre de 2021
Sirvió para corregir la alineación de las llantas
DavidCrz
Comentado en México el 26 de noviembre de 2021
Los tornillos excéntricos Moog son de 12mm, los tornillos originales del Honda Civic 03 son de 16mm Es necesario comprar 2 tornillos ( uno por cada rueda delantera ) el precio aquí es solo por 1, trae su arandela y tuerca, es importante que lo lleven donde tengan el equipo y la experiencia para su instalación, se aprietan según el instructivo a 60 lbs/pie, en mi caso cambie los amortiguadores delanteros ( K&B) y estos ya no traen el orificio de ajuste de camber ( lo traen fijo) por tal motivo no se podía realizar el ajuste del camber correctamente ( traia 2.5 grados positivo), lleve el auto a 3 talleres de alineación y ninguno pudo realizar un trabajo descente, hasta que busque que la solución es la instalación son estos tornillos.
Tyler Wilson
Comentado en Canadá el 19 de abril de 2019
Did the job! My civic's camber has been out for years and this has been reflected in the tire wear. Alignment shop today me the only way to fix it with these cars is with these camber bolts. Make sure you go to a good proper alignment shop with a good reputation to get this done.Just note that even though it says kit it only comes with one bolt set, you will need 2 kits, one for each side.b
kt123
Comentado en Canadá el 24 de abril de 2019
Fixed my camber pretty well. Seems high quality
Productos recomendados

Mex $595.25

Mex $ 315 .00 Mex $315.00

4.9
Elegir

Mex $441.00

Mex $ 202 .00 Mex $202.00

4.8
Elegir

Mex $1,503.06

Mex $ 616 .00 Mex $616.00

4.3
Elegir

Mex $441.41

Mex $ 216 .00 Mex $216.00

4.5
Elegir

Mex $2,149.99

Mex $ 924 .00 Mex $924.00

5.0
Elegir