No hay artículos en el carro
No hay artículos en el carroAbsorbe los golpes y protege la electrónica. Ideal para montar todos los accesorios marinos, electrónica y motores de arrastre sin tener que meterse debajo de la plataforma o detrás de la consola. El caucho limita la vibración y proporciona una instalación sólida. Los aisladores de fábrica MotorGuide vienen con muchos de nuestros soportes y son una forma rápida y sencilla de montar un motor de arrastre con acceso limitado. Cada aislador de goma tiene una tuerca moldeada dentro del extremo pequeño, que cuando se aprieta contra la parte inferior de la plataforma con el perno de acero inoxidable, forma una seta de goma que mantiene el soporte en su lugar. Cada kit viene con 4 pernos de acero inoxidable y 4 aisladores de goma, junto con instrucciones de montaje.
Robert R.
Comentado en los Estados Unidos el 4 de febrero de 2025
These bolt inserts were what I needed to mount my trolling motor and worked GREAT!
Manuel Dacosta
Comentado en los Estados Unidos el 24 de enero de 2025
Works great on my tracker
ROBERTO G.
Comentado en México el 3 de febrero de 2022
BUENA SUJECCION PARA MI MOTOR TROLLER.SOLO QUE POR MI MODELO DE TROLLER TUVE QUE COMPRAR POR APARTE TORNILLOS DE 4" MAS LARGOS PARA LOGRAR LLEGAR A LA ROSCA
George Mack
Comentado en Canadá el 20 de octubre de 2020
It fit properly
kerry
Comentado en Canadá el 18 de junio de 2018
Serves their purpose
Chuck Loeffler
Comentado en los Estados Unidos el 5 de junio de 2010
These are actually very nice mounts and easy to use. I highly recommend, however anyone ordering should order a second set as a spare. The very design of these will not last forever. In fact, my first set of these just failed on the water. Glad I had a second set onhand on the boat and a phillips screwdriver in the boat toolbox. Took 15 minutes to replace with a new set on the water.Now for the problem...the design of the mounts are to isolate shock and torque from the mount holes through the fiberglass boat deck. They truly do the job for this....no deck cracking what so ever after three full years of fairly hard use. However, this advantage comes at a price. The mounts are rubber and will eventually tear through/separate from the brass threaded tightening sleeve. When this happens, the mounts will have no grip and pull straight out. Fortunately, my MG gator mount has four of these, and motor torque only tore thru the 2 isolators on one side of the mount.When I replaced, I did all four of the isolators....glad I did, as the other two were about to fail as well. When the two did let loose, the mount looked as if it was going to fly off the boat, but the other two held. Lesson learned....although you're not supposed to have to get access below the deck to use these mounts, I WILL be adding a washer and nylon lock nuts to make sure the next time they fail, the mount doesn't try to jump off the deck:) My heart can't take that anymore!Excellent mounts though, I'm back here to order two more sets for spares!
Productos recomendados
Mex $2,384.52
Mex $ 1,168 .00 Mex $1,168.00
Mex $653.00
Mex $ 333 .00 Mex $333.00
Mex $1,221.18
Mex $ 512 .00 Mex $512.00
Mex $360.23
Mex $ 172 .00 Mex $172.00