No hay artículos en el carro
No hay artículos en el carroOmix ofrece piezas de repuesto de alta calidad para que puedas mantenerte parte de la herencia de Jeep en la carretera, piezas que siempre cumplen o superan las especificaciones del fabricante para la calidad en la que puedes confiar. Este sello frontal de repuesto se adapta a modelos de tapa dura de 4 puertas Wrangler JKU 11-17. El burlete se fija al cabezal del parabrisas y sella a los paneles superiores delanteros de libertad. Sustituye a OE 68088040AA
Samantha
Comentado en los Estados Unidos el 7 de abril de 2025
It kinda stopped the leaking.
tech
Comentado en los Estados Unidos el 18 de abril de 2024
Had a leak from the hardtop in between the main top and freedom panels and this fixed it.
Alex Toth
Comentado en Canadá el 25 de diciembre de 2020
Looks good
Joel
Comentado en los Estados Unidos el 19 de diciembre de 2019
Purchased for a 2012 Unlimited. Doesn't fit or attach exactly as OEM, but is very similar. Attaches with 3M tape to the hardtop. This did seem to fill the gap slightly better than the OEM seal. My OEM looked fine but had a slight gap at the back along the hardtop, OEM did not uninstall well, and fell apart tore, so maybe it was in bad shape. I also found a bunch of gunk that had worked its way under the OEM seal and may have contributed to my leak. In my case, my top would normally only leak (very badly) when I was parked on a hill, facing downhill, and there was heavy rain that lasted a while. Occasionally it would also have a minor drip leak on the passenger side along the freedom top to hard top seal on the outside. A couple months in, this seems to have fixed my leak, however JK hardtop leaks are very tough to troubleshoot. I also made adjustments to the foam and mucket seals. There is a Jeep bulletin that covers the many parts to check. I see other people complaining this didn't work, however there are too many possibilities for why it didn't work for them, and are not necessarily this part's fault. I'd recommend doing your research on possible causes and ensuring this seal is properly installed to a clean / prepped surface.
T. Harris
Comentado en los Estados Unidos el 18 de septiembre de 2019
Installed correctly, I have worked in a body shop so I know how to prep for double sided tape. At the joints on the coner the rubber weld on mine was split! Top still leaks but not as bad as my original one.Update leak is worse do not buy....
Productos recomendados
Mex $320.00
Mex $ 156 .00 Mex $156.00
Mex $201.00
Mex $ 100 .00 Mex $100.00
Mex $480.00
Mex $ 235 .00 Mex $235.00
Mex $329.99
Mex $ 178 .00 Mex $178.00