No hay artículos en el carro
No hay artículos en el carroMás información del producto
Steve Cross
Operador de Forja Caída de 40 años
"Estoy orgulloso de la marca OTC. Estoy haciendo una marca que ha pasado mucho tiempo. Cualquier tipo que trabaje en un coche ha oído hablar de la marca OTC, y probablemente lo han usado".
En OTC, estamos orgullosos de nuestro patrimonio y de los que lo han construido con nosotros.
OTC - Orgullosamente atendiendo a técnicos profesionales durante casi un siglo
Lo que más nos gusta de los técnicos es su ética de trabajo
Los técnicos son solucionadores de problemas que no tienen miedo de sudar en las cejas y grasa en sus manos. Ofrecen servicios de alta calidad que exigen herramientas de alta calidad. Cuando necesitan una herramienta confiable, saben que pueden depender de las herramientas OTC para entregar.
Owatonna Tool Company para el largo recorrido — con orgullo diseñar y fabricar herramientas de servicio especializado estadounidense, diagnósticos y equipos de taller desde 1925.
- Herramientas de especialidad automotriz
- Herramientas de servicio para camiones de servicio pesado
- Herramientas de tienda de servicio pesado
- Herramientas para motocicletas
- Herramientas de diagnóstico electrónico
- y mucho más
Ken Briggs
Comentado en los Estados Unidos el 18 de noviembre de 2023
Easily bent 3/8 tubing with no kinks .
Azamon Customer
Comentado en Canadá el 12 de mayo de 2021
I didn't read the specs closely enough when I bought it, and was worried after I purchased this whether or not I could use it on 3/16 nicopp brake line because it only says it goes down to 1/4. Another review seemed to indicate it wouldn't work well due to slippage. But I tried it on some 3/16 bulk nickel copper from Canadian Tire and it seemed to do a good job. Maybe there would be more slippage with a stiffer line like steel or stainless. I checked the line with a micrometer afterward and the line (3/16 inch is 187 mil) was widened out by only about 6 mils across the plane of the bend, so it appears to be quite a safe bend radius too, no kinking.
G. SMITH
Comentado en Canadá el 6 de julio de 2018
Good quality tubing bender. I'm in the process of changing all the hard brake lines on my car and this handy tool makes creating those bends super easy.
Customer
Comentado en Canadá el 10 de agosto de 2017
Amazon, this bender allowed me to make new steel 5/16" transmission lines for my antique muscle car equivalent or even better than the factory lines. I had to make new lines because I installed a newer transmission in my original factory car and the newer transmission required different length lines than the original lines which would not work for my application. They look as though they were factory installed in my car and needless to say I was extremely delighted and satisfied. Then I custom made fuel lines from chrome 5/16" plumbing water supply lines to my carburetor. Amazing tool.
Cerulean Dragon
Comentado en los Estados Unidos el 5 de noviembre de 2014
Bender's great*10-grandfather. Only used it for two bends, but it's heavy duty, well crafted, definitely something I could see using in the future. I bought it to bend some brake line, then realized that the brake line metal was actually easily bendable and it was far easier to hand bend then to use this. However, those two bends I did with the tool were easy enough. If I have to use it again in the future I may edit my review, but for now I'll say it's solidly built and seems like it would work well on harder tubes.
Productos recomendados
Mex $806.52
Mex $ 387 .00 Mex $387.00
Mex $697.44
Mex $ 355 .00 Mex $355.00
Mex $260.00
Mex $ 132 .00 Mex $132.00
Mex $2,937.12
Mex $ 1,174 .00 Mex $1,174.00
Mex $1,722.64
Mex $ 706 .00 Mex $706.00