No hay artículos en el carro
No hay artículos en el carroEl OTC 7311A está diseñado para los trabajos de brazo Pitman más duros. Son ajustables y tienen mandíbulas forjadas resistentes en forma para adaptarse al trabajo. Dos pernos de abrazadera bloquean las mordazas en el brazo Pitman asegurando un agarre sólido. Ambos extractores cubren una variedad de trabajos de tracción. Para coches y camiones ligeros. Máximo de propagación de la mandíbula: 2-1/8 pulgadas.
Owen
Comentado en los Estados Unidos el 18 de mayo de 2024
The bolts with the wing nuts stripped on mine so I had to get new bolts for it but once that was done it worked perfectly. It is a much better design than those without bolts as I had one of those that ended up bending and breaking
Timothy
Comentado en los Estados Unidos el 1 de abril de 2024
Great tool worked flawlessly. I replaced the two bolts with grade 8 fine thread bolts, to avoid any problems that I was reading about in other reviews.
brad
Comentado en Canadá el 20 de agosto de 2021
Worked perfectly, but like others said get grade 8 bolts. My other puller had the arms bend, this one didn't even flex
Customer
Comentado en Canadá el 4 de junio de 2020
Im thankful i had this for the job, my other cheaper pullers wouldnt work for the size and thickness of the pitman i have ..but have some longer bolts at your disposal for the spread excelent tool ,makes the difference!
Steve F
Comentado en los Estados Unidos el 30 de julio de 2018
Worked great to separate an idler arm (BMW E38), from the tie rod, that was just a little too small for a standard fixed pitman arm puller. I thought that the reach of the pressing bolt would be a little too short, it only had about 3 turns of thread to push. It separated the joint in about 1.5 turns past finger tight. I tightened the jaw closing screws with a wrench, tightly, to make sure it wouldn't slip.My fixed jaw puller would flex and slip off. None of the pullers in my low cost front end service kit, from the chain low cost tool store, would work on this joint.This is a good, heavy, solid puller.
Productos recomendados
Mex $1,069.90
Mex $ 481 .00 Mex $481.00
Mex $3,087.45
Mex $ 1,481 .00 Mex $1,481.00
Mex $1,855.00
Mex $ 834 .00 Mex $834.00
Mex $987.04
Mex $ 503 .00 Mex $503.00