No hay artículos en el carro
No hay artículos en el carroEste kit profesional se puede utilizar para aplicaciones domésticas e importadas. Los medidores de presión alta y baja hacen que este kit sea útil tanto para la transmisión como para el trabajo del motor. El kit viene completo con adaptador para la mayoría de aplicaciones. Diseñado para ser utilizado tanto para pruebas estáticas como en carretera.
CGL-DAC
Comentado en los Estados Unidos el 17 de octubre de 2024
WE OWN A AUTO CARE AND BATTERY LOCATION, AND THIS FOR OUR AUTOCARE SIDE WAS A MUST HAVE. THE BEST PRICE AND GREAT QUALITY.
Dagoberto
Comentado en México el 29 de diciembre de 2023
B. Coverstone
Comentado en los Estados Unidos el 6 de julio de 2022
This worked great for testing oil pressure. The manual is a bit ... well, there isn't really a manual per se. You have to infer everything, watch YouTube videos, maybe even read some forums. Here's a couple of things I learned:1) This kit has brass fitting. These are used for 90 degree elbows, extensions, size changes. All of these are NPT threads.2) This kit also has aluminum fittings. These are used to connect between a brass fitting and the car's oil pressure sensor port. Aluminum is softer so I have to assume this will help prevent warping the car's port.3) You can use teflon tape around the NPT brass fittings, but do NOT use teflon tape around the aluminum fitting that you screw into your car. You absolutely do not want to get a piece of teflon into your oil system as it can cause problems.4) Make sure to hold the oil sensor screw threads against the aluminum fitting and make sure the threads match EXACTLY. For example, the Kia Rio I was testing had 1/8-28 BSP threads. You also get a few other common aluminum adapters for various auto manufacturers. Call the dealer service department if one doesn't match and find out what it is. Someone somewhere surely sells an aluminum adapter to match.5) Start screwing the aluminum fitting into your car by HAND. After a few rotations it starts to get too tight to hand turn, so use a wrench to continue until it just starts to get tight. Do not overtighten.6) Start the car and watch the oil pressure for at least 5-10 minutes. Oil pressure psi will be higher when the car first starts and will gradually decrease as the oil warms up. The car I tested started around 60psi and gradually decreased to 26psi. The main thing is you don't want it below 10psi at idle. If it goes below 10psi, you will probably want to turn the car off or else risk ruining the engine. Check the service manual to know your car's exact range.7) When you accelerate the car, the pressure should jump up. For example, the car I tested jumped from 26psi to 60psi.8) You don't want to see needle bouncing all around. That can be a sign of low oil or a pump going bad. It will slightly move with the RPM of the car, but it shouldn't be bouncing everywhere.9) Depending how high up the oil pressure sensor port is located, you may have to drain some oil out of the system before you can unscrew the oil sensor without oil running everywhere. Don't forget to top it back off before testing. After testing, you may then have to drain some oil again before unscrewing the test adapter and putting the oil sensor back in.This tester gave me the peace of mind that the oil pressure in the car I tested is fine, and the oil pressure dashboard light illuminating is most likely due to the wiring harness. It can be safely driven to a mechanic to have the wiring repaired.
Roberto L. Roldan, Jr.
Comentado en Australia el 8 de septiembre de 2022
Great tool kit.
Nicholas Brennan
Comentado en Canadá el 30 de octubre de 2021
Can tell right away by the weight of the kit itself that it is high-quality all the pieces are there . no burs on the threads. Excited to be able to give accurate readings for warranty claims
Paul Rogers
Comentado en Australia el 24 de septiembre de 2020
A great set of oil pressure gauges for the home garage or workshop.Ideal for testing engine oil pressure and for transmissions and some hydraulic units .I would like to see improved padded protection around the shrouding.Typical OTC blue and white colour scheme makes these gauges easy to read.The contents comes in a plastic carry case to protect your investment.Airline type fittings make connection to the oil hose easier and prevents kinking.Comes with a variety oil adapter fittings.4.5 stars.
JLGB 8
Comentado en México el 1 de agosto de 2019
Excelente producto y servicio, muy rapido, de excelente calidad, grácias. 🙏☺
Oscar
Comentado en México el 7 de octubre de 2019
Buen producto y funcional.
jorge
Comentado en México el 26 de octubre de 2019
Excelente, OTC siempre es calidad
Eliud
Comentado en México el 20 de abril de 2019
Devolví el producto porque la manguera fugaba aceite. Le di una segunda oportunidad y fue la misma historia. Opté por mandar a hacer una manguera.
Jorge Ernesto Martínez Ramírez
Comentado en México el 1 de agosto de 2018
Acabo de recibir el paquete y uno de los manometros viene con la mica rota se ve como defecto de fábrica y es el que más se usaa el de motor de 0 a 100 psi. No lo pienso devolver ya que el costo de devolución corre por mi cuenta y al parecer eso no le afecta en funcionamiento. Pero deberían de revisar la mercancía antes de enviarla ya que este viene con maletín duro y no se pudo romper en el envío . También fuga por la manguera .
césar omar
Comentado en México el 18 de mayo de 2018
excelente equipo , muy útil para mediciones de aceite de motor y transmisión automática, muy completo con accesorios y mangueras
Productos recomendados
Mex $612.72
Mex $ 281 .00 Mex $281.00
Mex $168.99
Mex $ 87 .00 Mex $87.00
Mex $1,526.60
Mex $ 702 .00 Mex $702.00