No hay artículos en el carro
No hay artículos en el carro Materiales de alta calidad:
Nuestro soporte para almohadillas para orejas de disco está hecho con una almohadilla de goma dura, un núcleo de aluminio y un vástago de acero extraíble niquelado.
La almohadilla de goma dura proporciona un soporte fiable para discos de cambio rápido, asegurando una molienda consistente y precisa incluso durante trabajos agresivos.
Cuatro tipos de vástagos:
Nuestra almohadilla de disco de cambio rápido (TR/Tipo III) viene con vástagos de 1/8 pulgadas y 1/4 pulgadas, así como vástagos redondos/hexagonales que se pueden utilizar con cualquier taladro de aire o eléctrico, molinillo de troquel y otras herramientas giratorias para un máximo control de lijado.
Conecta el montaje sin esfuerzo a herramientas de molienda comunes como taladros y herramientas de aire con el vástago de 1/4 pulgadas incluido. Con solo un simple giro, el disco se bloquea de forma segura en el mandril para un fácil uso.
El soporte de almohadilla de disco NYNM es versátil y acepta una gama de consumibles de disco, incluyendo lijado, molienda, pulido, acondicionamiento/preparación de superficies y discos de cerdas. Con su adaptador especial de rosca externa, puedes instalar fácilmente el vástago de 1/8 pulgadas en los soportes de almohadilla de disco y desbloquear todo el potencial de tu Dremel para utilizar discos roloc y discos de lijado de bucle de gancho. Amplíe sus capacidades y realice el trabajo con facilidad.
El paquete incluye: 9 unidades NYNM versátil de 2 pulgadas
2 almohadillas para orejas de disco de cambio rápido de 2 pulgadas (TR/Tipo III).
1 vástago de 1/4 pulgadas, vástago redondo (6 mm). 1 vástago de 1/4 pulgadas, vástago hexagonal (6,3 mm).
2 almohadillas para orejas adaptadoras de espuma sintética con bloqueo de rollo.
1 rosca interna de 1/8 pulgadas (3 mm). 1 rosca interna de 6 mm.
1 conector de rosca externo M6.
Rony
Comentado en los Estados Unidos el 24 de mayo de 2024
Muy buena calidad de un bien material
LS
Comentado en los Estados Unidos el 10 de septiembre de 2024
Good to finish rock polishing with dimonnd polishing stick. But 1/8 shank bent on fist use.
Terry
Comentado en los Estados Unidos el 11 de agosto de 2023
I use this set with my drill and it is perfect size for sanding wood and cleaning up metal when used with the right 2" sanding and prep pads. I have used this with my dremel using the smallest attachment rod but to be honest an actual drill works better and if the dremel is set at lower power and the sanding disc sticks you can damage the motor or bend the rod itself. A drill is what I would recommend when using this for sanding.These are great though and have done quite a lot of quick work to clean up metal, wood and even areas of cemment walls using the different kind of pads on the market. If you have non hook and loop sand paper, regular sand paper that you get in a pack you can take a buffing pad screw on attachment and wrap the regular sand paper after cutting to fit, around the buffing pad and screw it on to the end of these attachments. It does work and the paper holds tight assuming you fold it all the way over and around the top of the pad where it screws onto end of the grinder attachment. I have sanded quite a lot of wood doing that and it works really well.I recommend buying a couple sets of these at once for spares. If you do a lot of sanding or grinding they can wear out. They are not that expensive, it is nice having a couple on hand so you can easily grab one if you lose one or it wears out. I have bent the smaller rod attachments when the sanding pad got stuck so having spare rods is really good idea.These can wobble and cause vibration if you don't set them center but even then there is a vibration at high speed. Doesn't matter the type of screw pad or sanding disc used. Hold the drill or whatever you are using with both hands and it works really well.
Pitkinchick
Comentado en los Estados Unidos el 11 de agosto de 2023
The 9 Pack 2 Inch Versatile Die Grinder Attachment Kit Roll Lock Pad Holders, with 1/8"and 1/4" Shanks Die Grinder Accessories Suitable for Drill Grinder Rotary Tools is the perfect accessory for every toolbox. I am a mechanic and I use a die grinder all the time. This attachment is perfect for attaching buffing and sanding pads with ease. This attachment is sturdy and well built. It comes with 9 pieces: 2 Pcs - 2inch Quick change Disc Pad (TR/Type III) with 1/8" (3mm) Round 1/4"(6.35) Round and 1/4" Hex shank, 2 Pcs Roll lock PU Foam adapter Pad, 1 Pcs M6 External thread connector in a plastic case. I recommend this to anyone who uses a die grinder or rotary tool for sanding or grinding. It is a great time saver and the price is just right.
Mack
Comentado en los Estados Unidos el 8 de octubre de 2023
There are tons of Roll Lock attachments and this kit is great as it has attachments for 1/8" and 1/4" and the standard 1/4" quick connect shank for the impact driver/drill that is so popular. I mostly use the 1/4" shank attachment for the die grinder but this kit has all three for versatility. The screw type and the hook and loop attachments are included for the various pads and disks available. I don't use the 1/8" Dremel attachment, but it's included if needed. A good quality and reasonably priced.
Productos recomendados
Mex $199.00
Mex $ 113 .00 Mex $113.00
Mex $2,753.34
Mex $ 1,183 .00 Mex $1,183.00
Mex $115.00
Mex $ 69 .00 Mex $69.00
Mex $200.00
Mex $ 113 .00 Mex $113.00
Mex $227.89
Mex $ 129 .00 Mex $129.00