No hay artículos en el carro
No hay artículos en el carroPlunge base assembly. Tactile palm-grip side handles for maximum comfort and control. Extra large center hole for larger bits, enhanced cut visibility. Includes router base and 2 tactile-grip handles. Also includes high-strength 1-3/16 Inch es center hole sub-base and motor lock lever.
Sean A McSorley
Comentado en los Estados Unidos el 21 de febrero de 2025
Poor alignment hole for the micro adjust threaded rod keeps the motor out of center in the base. Clamp does not secure motor. Attached picture shows real Milwaukee plunge base for comparison. Delivered in plain white box no Milwaukee packaging.
ANDRE COULOMBE
Comentado en Canadá el 31 de octubre de 2016
Excellent outils,robuste et indispensable.
Rob
Comentado en Canadá el 20 de julio de 2013
Well made sturdy unit. I like Milwaukee tools. Already had the fixed base router, a great unit, but needed a plunge action to make loose tenons. Since I already have two fixed base routers and didn't want a third one and this plunge assembly solved the problem and fit my existing Milwaukee router perfectly. Wasn't crazy about the depth adjustment so a 4 star but what really counts for me is the smooth and accurate plunge action and stable and comfortable grip handles. I've now made tons of plunge cuts with this base and it continues to work very well. Well worth it if someone wants to upgrade their fixed base Milwaukee.
dustoff499
Comentado en los Estados Unidos el 26 de octubre de 2009
I sure wish Amazon would correct the image associated with this item!Anyway, my impressions are mixed. This plunge base does not come with any storage case of any type. I know it's an accessory and the contents does not include a storage case but to me this omission by Milwaukee is disappointing.I too notice this plunge base does not have a means to prevent the motor from rising up the base other than its clamp. Question is... is an additional method to secure the motor needed? I think for the type of plunge routing many of us amateurs will do, it should be fine.Other than the above that could be improved on I think this is a good plunge base. The fit and finish was excellent and it's not as busy as others I have seen. The weight was not heavy but it is well built.I gave this plunge base three stars (minus 1 for no storage case, minus 1 for no backup to secure motor). If it were base on a scale of 10 I would rate it an 8.
Dennis N. Schmidt
Comentado en los Estados Unidos el 17 de octubre de 2008
First off I am not a hater. I've got well over thirty Milwaukee tools and think very highly of all of them with this one exception. For example I feel that the big 3 1/2 HP Milwaukee router (of which I own three) is the best router in the world for router table use. It actually hurts me to badmouth this product since I have such a high regard for Milwaukee tools.The problem with this plunge base is that the motor is insufficiently clamped into the base as this clamping is entirely achieved by the use of the over center clamp. On a conventional base router this isn't an issue since all of the load on the router bit is tangential. There is no force trying to push the router motor out of the base. A plunge router however is a different animal as when plunging there is considerable vertical force working against this clamp trying to push the motor out of the base. When under high vertical load (like plunging a mortise) the motor backs out of the base. All other multi based routers use this over center clamping system but augment it with a pin on the motor that fits into a slot in the plunge base to prevent the motor from rising up when the unit is plunged. The Milwaukee doesn't have this additional feature.I solved this problem by drilling and taping a hole into the plunge base for a set screw which I tighten against the router motor to lock it into place. This works fine but something like this should have been done by the factory and not me.Except for this major flaw the rest of the plunge base is good. The plunge is smooth, the feel and balance of the unit is very good, the depth adjustment system is excellent, and the handles comfortable. I do think that the plunge release lever should be longer as it's a bit hard to actuate, but, the handles intrude into this space making the use of a longer plunge release lever difficult.Good unit with an unacceptable flaw.
Productos recomendados
Mex $249.00
Mex $ 126 .00 Mex $126.00
Mex $120.00
Mex $ 67 .00 Mex $67.00
Mex $1,823.09
Mex $ 747 .00 Mex $747.00