Janet
Comentado en los Estados Unidos el 17 de marzo de 2025
Matched right up to my 2013 Toyota Tacoma. Easy install.
JOSE E.
Comentado en México el 28 de noviembre de 2024
Cerradura con llave para tapa trasera de pick up Tacoma, de muy buena calidad, se compro a mensualides de pagos muy cómodos.
Karen Stricker
Comentado en los Estados Unidos el 8 de octubre de 2024
It was easy to install and reasonably priced. The only problem is that the plastic unit breaks.
Don C M
Comentado en Canadá el 18 de septiembre de 2024
The tailgate lock works well and was easy to install
It’s a cheap tonneau
Comentado en Canadá el 4 de abril de 2024
Works perfect. Was able to change it out in my apartment parking lots with only the tools identified. Instructions are clear and easy to follow
alejandro ordóñez rascon
Comentado en México el 8 de mayo de 2021
el pop and lock cuando nuevo es negro pero cuando esta al intemperie (90% del tiempo) se pone gris
Ernesto Diaz Rodriguez
Comentado en México el 9 de marzo de 2021
Combinado con otro seguro antirrobo de batea te da tranquilidad de tener tu pickup en la calle, ya que sin ellos no tardan ni 20 segundos en robárselas ademas cuenta con lugar para instalar cámara de reversa lo cual es una gran ventaja
Lauro G.
Comentado en México el 12 de julio de 2019
Se ve de baja calidad pero espero funcione
Reynaldo PQ
Comentado en México el 26 de junio de 2019
Siento que los materiales internos son débiles, probablemente no dure mucho...
Manuel Llorente
Comentado en México el 21 de octubre de 2019
Es muy útil, y es la única oferta real en el mercado a un precio accesible, sin embargo la vida útil es de 4 años, porque el sol deteriora el plástico con el cual está hecha y se vuelve extremadamente quebradizo, aún cuando la usé muy poco para abrir y cerrar la puerta a los cuatro años se quebró al interior y al quererla arreglar todo se desmoronaba.Pero al ser la única oferta, compre esta nuevamente.
miguel alejandro eudave landeros
Comentado en México el 25 de septiembre de 2018
Bien
Ken Al Muen Dyne
Comentado en México el 1 de noviembre de 2017
Excelente producto, tardó un poco pero una vez en manos, me tomo 20min hacerle el cambio. No tuve ningún problema en hacer el cambio. Lo que si le falla al productor es tener un mejor instructivo.
boondock51
Comentado en los Estados Unidos el 29 de marzo de 2015
I ordered my first Pop and Lock tailgate handle directly from the manufacturer back in 2009 for my 2010 Tacoma PreRunner (with backup camera). The tailgate release lever (hook) arm recently broke and I opted to replace it with a newer model. I use my truck bed a lot so I’m constantly opening and closing the tailgate. This being said, I feel that the first lock lasted quite a while considering the heavy use of something made out of plastic-type materials.FIRST IMPRESSION: The first thing I noticed about the newer model is that it is totally redesigned. The key tumbler is now located on the left hand side of the unit and the backup camera slot is located on the right. All of the internal working mechanisms have been redesigned compared to earlier model and it worked very smoothly out of the box. The accompanying instructions are very good, however, I recommend going to Pop and Lock’s Website to view the instructions and excellent illustrations for your particular vehicle.MINOR INSTALLATION/OPERATION ISSUE: The installation process for the new model is pretty straight-forward and easy—providing the installer follow the how-to instructions exactly. However, I experienced an interference issue with the tailgate release lever (hook) binding under my tailgate handle OEM backup camera holder. After I completed the installation, I closed and opened the tailgate a few times to check if I had done everything correctly. I lifted the tailgate to the closed position, turned the handle key to the lock position, and pulled up on it a couple times to make sure the lock was secured. I tried to unlock the tumbler using the same key but it would not turn to the left (unlocked position)--the handle release lever would not disengage. Upon closer inspection and examination of the locking mechanisms, I found that the release lever (hook) was lodging under the OEM camera holder housing (next to the lower left mounting bolt) every time I would pull up on the handle after locking.SOLUTION: I fixed this minor problem by removing the camera holder from the Pop and Lock handle and then filing away a small amount of the plastic material around the camera holder mounting hole. After making this ‘minor’ modification to the camera holder and reinstalling everything, the Pop and Lock and tailgate works flawlessly. NOTE: The problem related to the camera holder and not with the Pop and Lock unit.OVERALL IMPRESSION: This is the second Pop and Lock I’ve purchased and I think the product is very good and useful. Yes, the first one I purchased in 2009 broke but it did its job while it lasted. This product is very easy to install and it works very well. I am rating this product with five stars solely based on previous experience and I trust that the newer model will do its job as well.FINAL NOTE: I’ve always had a lockable hard-top Tonneau cover and a Pop and Lock on my truck. I feel that two locking mechanisms serve as a “deterrent”, but not a cure all. Yes, I am fully aware of the Thief’s Creed: “If I really want it, then I will find a way to take it.” I’ll just say that a two lock tailgate combination has served me well; especially considering that some areas I travel often expose my truck to break-in opportunities.