No hay artículos en el carro
No hay artículos en el carroDescripción del producto
PQY - Kit de bloqueo de línea de freno delantero, kit de soporte para colina de control de rollo de alta
Para carreras de arrastre para bloquear los neumáticos delanteros del coche, funciona con sistemas eléctricos de 12 a 24 voltios. Puede manejar picos de presión de hasta 1000 psi. Mantén la presión del freno en el freno delantero o trasero para mantener el vehículo en la línea de arranque en la colina o línea de arranque. Esta válvula solenoide de alta calidad controla tanto el freno delantero como el freno trasero. Haz que los frenos sean más convenientes. El kit de bloqueo de línea contiene un interruptor de botón de alta resistencia, soporte de interruptor, cable enrollado, válvula de bloqueo de línea reconstruible, soporte de fusible y luz indicadora.
Detalles de tallas:
NOTA
Steve S.
Comentado en los Estados Unidos el 20 de febrero de 2025
Junk outta the box....spend more time on the product than the box and you might have something of worth.Pintle gets jammed in the cylinder and requires disassembly to free up. Try this review Amazon or stop asking me to review junk . The only decent thing out of this .... Amazon's return/refund policy is spot on
Jonathan leo
Comentado en los Estados Unidos el 22 de enero de 2025
Works as it should make sure you read instructions for which ones are inlet and outletsVery simple install just took some figuring out brake line fitting sizes
Moparich
Comentado en los Estados Unidos el 21 de enero de 2025
Installation was easy you do need to get your own adapters for the 1/8” npt ports. Build quality is solid doesn’t look cheap.I am installing to goof around. Function will have to wait a few months but I will update
John Nickel
Comentado en los Estados Unidos el 5 de abril de 2025
Item came packaged well with instructions. Have not installed yet. Item looks to be well made.
Matt
Comentado en Canadá el 28 de abril de 2024
Just installed, installation went fine. Noticed a few people are talking about the inlet port hole being misaligned. Just want to clarify, that misalignment is completely irrelevant. The ports on the housing are NOT flare fittings, you cant thread your brake line directly into the part. You have to thread in the appropriate adapter which is a tapered NPT thread first. The adapter, being sealed by the thread not the flare means the hole in the inlet housing doesnt matter at all if its not aligned. Hence why they supply Teflon tape with the kit. Hope this helps!PS fun fact: you can also see the misaligned hole in the instructions image.
Productos recomendados
Mex $356.99
Mex $ 182 .00 Mex $182.00
Mex $516.26
Mex $ 258 .00 Mex $258.00
Mex $1,389.42
Mex $ 597 .00 Mex $597.00