No hay artículos en el carro
No hay artículos en el carro
Advertencia: no tiene antenas intercambiables rápidamente/desmontables.
Está construido sobre la plataforma Easy y tiene un flash EEPROM de 512K, por lo que puedes flashear el último Firmware RRG/Iceman.
Esto requiere cierto conocimiento para parpadear el Firmware y funcionar.
Necesitarás una computadora y te sentirás cómodo ejecutando comandos de línea de comandos de terminal para usar el Proxmark 3.
1. Antena de alta frecuencia integrada, coincidencia de profundidad de la antena, elimina puntos ciegos, lee todos los datos de la tarjeta que fluyen sin interrupciones.
2. Aumenta el análisis de la tasa de clave secreta, el tamaño de la tarjeta lo lleva todo.
3. Olfatear datos, estable y baja tasa de error.
4. La antena de baja frecuencia para mejorar la relación señal a ruido, mayor es la tasa de reconocimiento.
5. Sin interfaz de antena, no necesita enchufar. Porque es fácil de dañar.
6. Alimentación por puerto USB, simple y conveniente. (se puede utilizar la fuente de alimentación móvil).
7. Ligero y portátil. L
Básico:
Modelo: PM3Easy 3.0512KWorking
Voltaje: 3,5 - 5,5 V.
Corriente: 50-130mAItem
Tamaño: 8,8 x 5,5 x 1,6 cm.
Tamaño EEPROM: 512 KGrosor: 1,6 cm
Contenido del paquete:
1 módulo Proxmark3 V3.0 DEV Easy 512.
1 cable USBDataCable
2 tarjetas de PVC Mifare 1 S50 de 13,56 MHz.
2 tarjetas de PVC Mifare UID de 13,56 MHz.
2 tarjetas de PVC Mifare CUID de 13,56 MHz.
2 etiquetas IC de llave RFID de 13,56 MHz (azul), 2 tarjetas de PVC de 125 Khz x T5577ID.
Robert S.
Comentado en los Estados Unidos el 31 de marzo de 2025
I read the instructions and followed them. I couldn't get any of my pc's to recognize the proxmark. I went to the github and downloaded the latest software, read the docs there. Still not working. I went to the Discord and feel I've exhausted the resources available to me trying to make this work. JUNK JUNK JUNK!
Marky Prox
Comentado en Canadá el 20 de junio de 2024
The description says it's the Proxmark3 RDv4 but it's not. As long as you're ok with the Proxmark3 Easy then this is perfect. 512k lets you flash the latest Iceman firmware. Had no issues flashing a prebuilt firmware or building the firmware from Github and flashing it. Unlike other Proxmark3 Easy devices out there, this only has one USB micro connector. If you need to use Standalone mode, you can plug a power bank into the connector and it works just fine.
GO DJ HaKa
Comentado en los Estados Unidos el 18 de marzo de 2024
It took all but 10 minutes or less from unboxing to get this flashed with the latest Iceman firmware and scanning cards. But again, I know my way about computers particularly Linux. I also knew what to expect as I actually READ the documentation before arrival: delivery was less than 24 hours from ordering thanks to Amazon.This is the way to go if you want to gain knowledge and learn all about RFID, and not for those "what do I click to do X" kind of people who only want results and not knowledge and education... If you want that, just get a flipper or even better save your money and get a $15 china device that will do what you want.The proxmark3 easy's interface is so easy and intuitive, with more than generous help commands built in every command. The proxmark3 even has commands like "auto" which does all the work of figuring out what card it is, and then suggests the next commands to carry onto the next phase of your research: it couldn't be any easier or better. I heard before Iceman came on board and contributed (like pre-2013) the proxmark3 software WAS terrible and very hard to use, but now because of Iceman even a baby could do it.
Linux User
Comentado en los Estados Unidos el 25 de octubre de 2024
As a lock Smith this item makes it very easy to read and write new cards for any customer who lost their key or needs a replacement. It's very compatible with linux, windows and mac. So if you need a tool that can help you in lock smithing so that you can gain a extra skill this is the item you need.
Hugo
Comentado en México el 17 de abril de 2024
Muy buena herramienta RFID-NFC, lo compré caro sólo porque tenía buena reseña, venía con tarjetas de todos los modelos y llaveros RFID para probar. Lo recomiendo, aunque si encuentran una buena oferta tómenla.
Nate
Comentado en los Estados Unidos el 19 de mayo de 2023
There are two things you should know right out of the gate:1. This is a generic Alibaba proxmark32. This is not the rdv4 as listed in the title.It took several days of tinkering, but I was able to get it flashed with the Iceman bootloader and have it read a card. It comes with the device, cards, a cable and that's it. If you aren't a tinkerer, skip this one.
Productos recomendados
Mex $1,430.00
Mex $ 586 .00 Mex $586.00
Mex $492.47
Mex $ 256 .00 Mex $256.00