No hay artículos en el carro
No hay artículos en el carroCaracterísticas:
- Un par de altavoz de agudos de domo PEI de 1"
- Diafragma PEI
- Bobina de voz ASV de alta temperatura de 1 pulgada y CCAW.
- Imán de neodimio
- Asegura una baja distorsión.
- Capacidad de montaje empotrado de 2 tipos
- Red cruzada a juego de impedancia bidireccional de 12 dB
- Grado marino: IP-X5
Contenido de la caja: - Par de tweeters
- Par de redes cruzadas
- (2) Difusor de bocina.
- (2) Juntas de plástico.
- (2) Soportes de montaje de acero inoxidable.
- (2) Bolsas de tornillo inoxidables.
Especificaciones técnicas: - Manejo de energía: 120 vatios máx.
- Impedancia: 4 Ohm
- Sensibilidad: 93 dB
- Respuesta de frecuencia: 1,4 KHz - 22 KHz.
- Profundidad de montaje: 0.67 pulgadas
- Profundidad de montaje con difusor de bocina: 1.42 pulgadas
- Dimensiones del producto: 2.20 x 2.20 x 1.06 pulgadas.
- Dimensiones del producto con difusor de bocina: 4.37 x 4.37 x 1.65 pulgadas
Elton
Comentado en los Estados Unidos el 4 de marzo de 2025
Very good
Svard75
Comentado en Canadá el 26 de marzo de 2025
Tweeters frequency is from 1.4khz up to 22khz. The crossover it comes with has a 4.7uf cap. Means the crossover point is 10khz. It's cutting off quite a bit of the good stuff if you just get a different crossover. I just added some 33uf caps and it sounds perfect.Sound quality itself is a little tinny. Typical of cheap tweeters.
Captain Shaun
Comentado en los Estados Unidos el 20 de enero de 2025
GREAT DEAL
Jon - Life from my wheelchair & TikTok
Comentado en los Estados Unidos el 6 de septiembre de 2024
Just got them sp not hooked uo yet.They arrived fast, and appear to be in new condition.I own a Bluetooth speaker with 1 inch tweeters that burned out.I will be attaching these to the grill most likely with the horn diffuser.From the size and shape of the actual tweeters I think I could just pull my original dead ones out and put just the tweeter in. Appears to be the same size.They came assembled with the horn diffusers in place.They look really nice for budget friendly gear.As for sound quality I will update this review with more details and a little video.Love the crossover connections.Suggestion to the manufacturer Pyle.In my photos I used 2 zipties on each to secure the wires to the horn diffuser body. I made sure not to put any strain on the wires and left them some slack.The zipties prevent the wires breaking at the connection points where there isn't much to solder to if they break.I get that these are budget friendly but the wire management lost the product a star.Once hooked up the sound clarity, performance, and quality may make up for that last star.
ANNE KIWANUKA KALANDA
Comentado en los Estados Unidos el 17 de diciembre de 2023
EXCELLENT
Productos recomendados