No hay artículos en el carro
No hay artículos en el carroSoporte inferior Raceface BSA Ø30-68/73
derekdal
Comentado en los Estados Unidos el 10 de febrero de 2025
Finally needed a replacement due to creaking and a little rough feeling. 10 years is more than enough value to get from a bottom bracket
Double A-Ron
Comentado en los Estados Unidos el 17 de agosto de 2024
If you’re picking this up on Amazon, you’re probably planning to install it yourself to save some cash. So here’s my advice: Make sure you’ve got the right tools—or at least the right friends who do.A couple of things to note: The two bearing ends come with a connector sleeve, but if you’re riding a 2017 Santa Cruz Hightower CC, that sleeve isn’t going to work for you. It actually increases the coefficient of friction, even if you slather on Park Tool’s blue grease and make sure you use a decent amount of Park Blue Grease.When it comes to torque, aim for 35-50Nm, depending on your weight. At 240lbs, I went with 50Nm for extra security.For the non-drive side, I ended up using one of the provided spacers. A quick tip: after installation, check your chain alignment in both the lowest and highest gears. If it’s too far off to one side, it’ll be obvious when you look down the chain—it’ll look way off-center. If you find you need that spacer, you’ll have to pull the bearings out, add the spacer inside the bearing, and then tighten it all back up. I recommend starting with the non-drive side to avoid messing with your drivetrain’s geometry.Last Tip: Remember to use anti-seize white paste on the connection point at the drive side.Also, my last BB [same model] lasted me 5+ years of decent use - the BB is pretty solid IF you install it and lube it correctly
R
Comentado en los Estados Unidos el 10 de enero de 2024
Good cheap bottom bracket for 30mm spindle cranks.
Michael
Comentado en el Reino Unido el 24 de septiembre de 2024
Exactly as described. No issues
E. Davila
Comentado en los Estados Unidos el 31 de julio de 2019
These BB work well but they are not as durable as some more high dollar BB. They work well with the cinch system cranks and come with plenty of spacers.
Productos recomendados
Mex $1,046.76
Mex $ 481 .00 Mex $481.00
Mex $355.00
Mex $ 184 .00 Mex $184.00
Mex $161.00
Mex $ 86 .00 Mex $86.00
Mex $307.00
Mex $ 138 .00 Mex $138.00
Mex $380.00
Mex $ 201 .00 Mex $201.00