Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

RAD Cycle Products - Elevador de Bicicleta y Escalera para tu cochera o Taller con Capacidad para hasta 75 Libras, no Necesita Tabla de Montaje

Envío gratis en pedidos superiores a Mex $600.00

Mex $902.17

Mex $ 442 .00 Mex $442.00

En stock

1.Nombredelestilo:Elevador De Bicicletas Y Escaleras


Acerca de este artículo

  • Los ganchos están diseñados con un revestimiento de hule para proteger su bicicleta de arañazos
  • El diseño robusto permite levantar bicicletas pesadas de hasta 34 kg
  • Para techos de hasta 3,66 m
  • Mecanismo de bloqueo de seguridad que previene algún accidente


Este producto está fabricado con materiales de calidad. El producto es fácil de usar y se adapta a todos.


Frank J.
Comentado en Canadá el 4 de agosto de 2024
Good product. Seems sturdy and strong. Very easy to install and feed rope through. Installed 1 week ago and so far so good.
JORGE DADA
Comentado en México el 18 de marzo de 2023
Buena solución, ahorra espacio
David Scott
Comentado en Australia el 19 de diciembre de 2023
Had for two years now working well.The only minor issue is the the Mounting Screws have a larger head than the instructions indicate and you cannot slide pulleys along the rail past the screws. Need to position the pulleys before installing all the mounting screws.
Sergio J Moctezuma Jiménez
Comentado en México el 3 de enero de 2022
Lo ocupe para suspender mi bicicleta a 12 metros de altura solo tube que poner una cuerda más larga y funcionó correctamente.
Alpbachhuber
Comentado en Alemania el 10 de abril de 2022
Beim dritten Mal benutzen um das E-bicke zu reinigen ist der Aufnahme Haken abgebrochen. Aluguss erweist sich als nicht geeignet.
Huw
Comentado en el Reino Unido el 8 de mayo de 2021
The metal main metal parts are very good. Unfortunately the first time we used it the rope frayed. We replaced the rope with a higher quality sailing rope which we have routed over the pulleys without using the locking mechanism. We have fixed a more robust cleat to the garage wall and use this instead of the locking mechanism. The light weight cleat provided is used to hold the spare rope. We are also using a short bunge to connect one of the pulleys to the handlebars because the fitting provided is not big enough to attach to the handlebars securely. This arrangement seems to be working well for lifting up my wife’s electric mountain bike when I am servicing it etc.
Ñiura
Comentado en México el 4 de noviembre de 2021
Es fácil de instalar, una persona puede subir y bajar la bicicleta sin problema, sólo tienes que entender el mecanismo del freno de la cuerda y listo.
Gadget Geek
Comentado en los Estados Unidos el 11 de enero de 2021
This is a good device to get your bike up off the floor of your garage or workshop. If you want to hoist the bike so that it sits above your head, you’ll need at least 4½ feet of clearance between the top of your head and the ceiling above.The lift is very sturdy and easy to put together. The rail has five mounting holes: two on each end and one in the middle. Since you’ll be tugging on this to lift your bike (or equipment), you’ll need to ensure you securely mount the rail. If you can’t screw the rail along an overhead truss, I recommend using plastic toggle anchor if mounting it on a drywall surface that spans two trusses. Two of the end holes are 24” on-center, so you should be able to anchor at least two screws into trusses. If mounting to a bare overhead (exposed trusses), use a mounting board the same length of the rail. Also, if you’re mounting it to trusses that ascend, but the rail runs perpendicular to the ascent, cut a wedge the length/width of the rail to compensate for the angle, allowing the lift to sit parallel to the floor.The cam/catch mechanism seems a bit flimsy, but it works. Although it hangs up every once in a while, it keeps the load securely overhead. The kit comes with 50 feet of black rope, but it had too much stretch for my liking, and it didn’t finish well when cut and heat sealed. I replaced it with a 3/16” (5mm) static climbing accessory rope. For a 12-foot overhead, I needed 30 feet of rope.The double pulley system allows you to raise the bike and maintain the two lift points parallel to the floor (with a load). I mounted my tie-down cleat at about 3.5 feet off the ground, but if you have the room, I recommend mounting it just about shoulder height. This allows you to hang the coil of excess rope on the cleat without it getting in the way of items on the floor.Pros:- sturdy build- easy to assemble- frees up valuable floor spaceCons:- low-quality rope
Ana Ruth Figueroa Contreras
Comentado en México el 20 de septiembre de 2020
Muy práctico para poco espacio o aprovecharlo
Jorge de la Cueva
Comentado en México el 21 de agosto de 2019
es una pena que el instructivo sea poco claro y hay que buscar tutoriales en internet
RECASY 2018
Comentado en México el 23 de julio de 2019
MUY FACILES DE INSTALAR
Aaroncg
Comentado en México el 4 de febrero de 2019
Muy práctica y fácil de instalar para guardar la bicicleta
Juan Manuel De Anda Romero
Comentado en México el 24 de enero de 2016
El producto es bastante bueno para su precio. Las poleas son un poco chicas y la cuerda tiende a salirse mucho de ellas. Es facil armarlo pero no instalarlo. Los tornillos con los que viene no son tan de buena calidad (3 se me doblaron y uno se le rompio la cabeza). Tampoco trae taquetes. No trajo instructivo pero se puede encontrar el pdf si lees las reseñas en inglés.Fuera de eso. Es un excelente producto. Se monta muy faciles los ganchos y no se ve de mala calidad ningun componente.El servicio de entrega llego mas rápido de lo esperado.En general cumple con su cometido y su precio es ideal.
Productos recomendados

Mex $109.00

Mex $ 55 .00 Mex $55.00

5.0
Elegir