Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

RAM MOUNTS (RAM-B-166-UN10U Twist Lock con Ventosa Universal X-Grip IV teléfono Grande,/Phablet Soporte

Envío gratis en pedidos superiores a Mex $600.00

Mex $2,399.48

Mex $ 1,055 .00 Mex $1,055.00

En stock

Acerca de este artículo

  • X-Grip características: 1. rustproof2. Compuesto de alta resistencia y estructura de acero inoxidable 3. Resorte de la horquilla se expande y contratos para un ajuste perfecto de su dispositivo 4. Con revestimiento de goma consejos le dispositivo de sujeción firme y estable 5. Tecnología enchufe permite múltiples ángulos de ajuste y articulación de dispositivo 6. Incluye correa para cabina abierta y ambientes extremos 7. warranty8 de por vida. Fabricado en Estados Unidos.
  • Material: con recubrimiento de polvo de aluminio de grado marino, grado marino componentes de acero inoxidable y de alta resistencia compuesto
  • Tamaño de la bola: 2.5 cm Tamaño de la pelota de goma "B"
  • Nota: el "U" en el número de pieza refleja producto empaquetado en bolsa de poliéster. RAM altamente recomienda utilizando la cinta suministrada para todas las aplicaciones de cabina abierta durante el uso de este producto.
  • Peso: 0,73 libras.


El ram-b-166-un10u consta de una ventosa de 8.4 cm de diámetro de rosca de base, brazo longitud doble socket estándar y universal X-Grip soporte de resorte para teléfonos de gran tamaño y tabletas. La base de ventosa, Twist Lock está diseñado para tener una fuerte sujeción sobre vidrio y superficies de plástico, no porosa como RAM discos adhesivos. Diseñado en la Montura es un sistema de toma de 2.5 cm de diámetro patentado pelota de goma y con puntos de ajuste en ambos extremos del brazo Socket; Este brazo con un giro de la perilla, le permite mover el soporte a su posición de visualización óptima. El resorte de la X-Grip soporte se expande y contrae, lo que permite para un ajuste personalizado perfecto de su teléfono o tablet.
El X-Grip incluye un dispositivo Tether recomendado para aplicaciones al aire última intervensión. El soporte es compatible con dispositivos de mano que se ajuste a las dimensiones se indican a continuación. Es importante verificar las dimensiones de su dispositivo de mano con un caso/manga/piel cuando determinar el tamaño total


verkoelenmarc
Revisado en Bélgica el 12 de noviembre de 2024
is niet goedkoop maar is een prima gsm houder heb er een in mijn autobus ook
Benjamin
Comentado en México el 18 de junio de 2021
Todo bien con el producto
NITO
Comentado en España el 23 de diciembre de 2019
Es más caro que los demás ,pero cuando lo pruebas lo entiendes .Sin dudarlo es lo mejor del mercadoTras 3000 kms de baches y caminos de piedras ni se ha movido .
Martin K
Comentado en Canadá el 4 de abril de 2019
Well built product, easy to mount my iPhone 6 Plus. Suction cup it strong. The only problem is the arm is too short so I bought a longer one. This way the phone rests just above the edge of my dashboard, near the vent. In the summer I can cool the phone down with the vent and A/C. The materials are strong plastic and metal, which I think will last many years. The best thing about the mount is that it can be adjusted at 2 points due to the 1" ball at either end of the arm. Even with the short and long arms, my phone is fairly steady when I go over bumps. The mount is pricey, but the other mounts that I've used over the years are flimsy and lower in quality compared to the RAM products. I highly recommend RAM mounts if you're going overland (off road) or have uncommon setups, like tablets and laptops. I also purchased a floor-mounted tablet mount.
Customer
Comentado en los Estados Unidos el 12 de junio de 2014
My criteria to buy: cost; will it hold a Nexus 5 phone or Nexus 7 tablet (not at the same time); fit well in Acura TL; multi-use ability for car or bike (still need to buy the component for bike). Other than the cost, its a Winner! If cost are not an issue - hands down this is the tops of all the mounts. Easy use; fast no-fuss setup, rugged construction. Smooth operation when needing any adjustment or when changing out phone or tablet. There were other mount models that are unique design, compact, lower priced (not necessarily cheap material/made) but after long review on the web, the RAM website, and other reviewers, I believe the RAM products are superior in material and construction and effectively functional design. This item was listed in Amazon's Automotive section and didnt have a product picture - almost missed it in the long list of other mounts. Once I found the RAM products, they get high marks and I agree. The RAM products are component based. I specific item was a one item purchase but it has the following components: the 3.3in (larger) suction base with twist lock (RAP-224-1U), 1in ball diamond base adapter (RAM-B-238), 3.69in Double Socket Arm (RAM-B-201), and the RAM Universal X-Grip IV Holder (Large Phone/Phablet) with 1" Ball(RAM-HOL-UN10BU). Didnt want 2 devices for my phone and my tablet and another device for my bike, so I took a chance on this one. There are currently 4 models of the X-Grip, this is model IV for Large Phone/Phablets. I can hold an HTC EVO 4G, Nexus 4, Nexus 5 (with or without cases) and a Nexus 7 (2012 or 2013; with or without cases) (I use the MoKo Nexus 7 Slim-Fit Case). Only hesitation was the price - but considering it meets my tall order. Great deal. I used the Arkon for a long time but it was a beating to use. To insert or remove a phone or to adjust , tab holder would fall off, hard to align, felt like it would break - not this mount. Place suction where you want, turn lock lever, turn knob on arm, align and tighten - base is done. Now grab x-grip rubber post caps with one hand and position your phone or tablet - done.
Mohamed Alqahtani
The item came with some scratches and some yellowish on the logo pad which indicates that it was used or a returned item
Productos recomendados