No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Compatible con los siguientes modelos de radar: Uniden R1, R2, R3, R4, R5, R6, R7, LRD300, LRD350, LRD400, LRD450, LRD500, LRD550, LRD600, LRD650, LRD700, LRD750, LRD800, LRD8500000. LRD90 de LRD0, LRD937, LRD950, LRD6199 SW, LRD6499 SW, DF1, DFR2, DFR3, DFR4, DFR5, DFR6, DFR7, DFR8, DFR9 (no para modelos no listados)
Kit de instalación del espejo retrovisor del detector de radar, soporte del detector de radar del espejo retrovisor del coche/camión, seguro y nunca se cae, rotación de 360 grados, fácil instalación, no requiere herramientas. Ten en cuenta que este soporte necesitará espacio en el tallo de 1 pulgada para configurar en tu espejo retrovisor.
La rotación de 360 grados te permite bloquearlo
la mejor posición ideal.
Después de fijar la posición, utiliza un hexágono
Llave para ayudar a que el mango se bloquee fácilmente
El agujero universal de tornillo de 1/4 puede expandir otros
dispositivos
El paquete incluye:
Tiene una fuerte expansibilidad y multi-
uso de la función, y puede convertir la rotación
Adaptador de bola con un diámetro de 1,6 cm.
Edc
Comentado en los Estados Unidos el 2 de marzo de 2025
For reference my installation was done on a GR Toyota Supra.Works as intended but I’m taking off a star for installation difficulties. The Allen key and the hex screws do not match and you will need your own 3/32 Allen key in order to install the product.The product is much cheaper than blendmount and it’s pretty sturdy but it sticks out more than blendmount. The installation on all these mounts are annoying and having a racheting hex screwdriver will make the job easier.
Anthony
Comentado en los Estados Unidos el 26 de enero de 2025
Update: The seller has quickly contacted me and offered a full refund. Very good response.Installation and use were easy and seemed like a great mount, but as others have noted, there are some issues. It's good that they include additional screws, as you will probably need them. First, as you can see in the picture, the bar that clips into the radar detector bends easily. It is not magnetic, so I assume it is aluminum or some other cheaper material. This bend made it fit my Uniden R8 better as the round piece it is screwed into now doesn't hit the detector casing and it now snaps into place. This is evidence of inferior materials being used. More importantly, as others have noted, the 4 screws that hold the bar to the round plastic have no lock washers. I do not drive daily and was not removing and reinserting the detector daily. Yesterday I noticed the radar detector started pivoting around. Only one of the four tiny screws remained and that screw was loose. These screws are so tiny and they are impossible to find; they are magnetic, so I am trying to sweep the car with a strong magnetic but so far I have not found even one of them. I was able to scrap a similar screw from an old computer TV tuner card's heatsink as I can't find the extra screws that came with the product. I used a little crazy glue in the screw holes to hopefully keep the screws from coming out, but I don't have much hope in this either.TL;DR: If you can manage to figure out how to keep the 4 screws in place, it's not a terrible and affordable solution.
Hallsey
Comentado en Canadá el 20 de marzo de 2024
So far so good. Super easy to install - came with wrenches and a screwdriver. I bought it for my R8. Yes, the plate that connects to the R8 is a tight fit, but I don’t mind as it makes a more rigid fit. It came with some extra o-rings which appear to be replacements for the ones installed… nice touch…. I also used some loc-tight on the small screws for added security.
C.L.
Comentado en los Estados Unidos el 4 de diciembre de 2024
I am giving this 5 stars even thought it does not fit on my 2024 Subaru Outback. The front to back depth of the attachment bracket is literally a few millimeters too thick for the space between the mirror body and the pivot arm the mirror attaches to. So when I installed the bracket the mirror was pushed up to the point where I could only see the very top of my rear window. I was installing the bracket from my passenger seat so the steering wheel was not in my way, and I didn't notice the issue until I sat in my driver's seat to pull the car out of the garage. I drove all the way to work without the use of my rear-view mirror just to see how the mount would hold up and it is ROCK SOLID. No vibration, no bouncing or anything. I do recommend this product..... just not if you have a 2024 Outback.The mount is made very well, it is very easy to install. And the minor depth issue can't really be blamed on either the car or the mount... they just don't work together as it is intended to be installed. I have not given up yet though, I am going to see if it is possible to mount the bracket securely to the 'down' arm of the mirror. Who knows.***UPDATE*** The mount is working perfectly mounted to the down arm of the rear view mirror! It took a little bit of stubbornness to make it work where I wanted it... but I had a feeling it would fit and it did! It looks amazing with the radar detector just below the mirror and it is completely solid. I really like how tightening and loosening both ball joints is done by one easy to use handle. I wish I bought this a long time ago.
bkar24
Comentado en los Estados Unidos el 26 de septiembre de 2024
No se pudo cargar el contenido.
Productos recomendados
Mex $313.99
Mex $ 172 .00 Mex $172.00
Mex $510.00
Mex $ 249 .00 Mex $249.00
Mex $475.00
Mex $ 213 .00 Mex $213.00
Mex $1,348.73
Mex $ 660 .00 Mex $660.00
Mex $4,708.11
Mex $ 1,881 .00 Mex $1,881.00
Mex $284.34
Mex $ 147 .00 Mex $147.00