No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Sustituye a P/N: N/A
Para FCC ID: HYQ12BBT, HYQ1512V
Para IC/otros: HYQ12BBK, N14TMTX-1
Instalación: Retira tu hoja vieja e instálala en esta carcasa; no es necesario cortar
JC
Comentado en los Estados Unidos el 5 de mayo de 2025
When putting the key into the holder. I took a small drill bit and shaved out the hole. Then to make the buttons from being recessed. I took a business card and cut 2 pieces too go behind the control module and it fits perfectly.
JC
Comentado en los Estados Unidos el 5 de mayo de 2025
When putting the key into the holder. I took a small drill bit and shaved out the hole. Then to make the buttons from being recessed. I took a business card and cut 2 pieces too go behind the control module and it fits perfectly.
JC
Comentado en los Estados Unidos el 5 de mayo de 2025
When putting the key into the holder. I took a small drill bit and shaved out the hole. Then to make the buttons from being recessed. I took a business card and cut 2 pieces too go behind the control module and it fits perfectly.
JC
Comentado en los Estados Unidos el 5 de mayo de 2025
When putting the key into the holder. I took a small drill bit and shaved out the hole. Then to make the buttons from being recessed. I took a business card and cut 2 pieces too go behind the control module and it fits perfectly.
JC
Comentado en los Estados Unidos el 5 de mayo de 2025
When putting the key into the holder. I took a small drill bit and shaved out the hole. Then to make the buttons from being recessed. I took a business card and cut 2 pieces too go behind the control module and it fits perfectly.
JC
Comentado en los Estados Unidos el 5 de mayo de 2025
When putting the key into the holder. I took a small drill bit and shaved out the hole. Then to make the buttons from being recessed. I took a business card and cut 2 pieces too go behind the control module and it fits perfectly.
JC
Comentado en los Estados Unidos el 5 de mayo de 2025
When putting the key into the holder. I took a small drill bit and shaved out the hole. Then to make the buttons from being recessed. I took a business card and cut 2 pieces too go behind the control module and it fits perfectly.
JC
Comentado en los Estados Unidos el 5 de mayo de 2025
When putting the key into the holder. I took a small drill bit and shaved out the hole. Then to make the buttons from being recessed. I took a business card and cut 2 pieces too go behind the control module and it fits perfectly.
Karlie Hammes
Comentado en los Estados Unidos el 22 de febrero de 2025
Love it. I was searching for a good phone wallet purse for my iPhone 8+-yes 8. Absolutely love the color, classic wine w/gold zipper & hooks! I’ll prob get one in black too. It’s not bulky; it’s thinner than other wallet purses I have. Prob can’t cram a lot of cards or cash but great for an ID, debit card, & a couple bills. The zipper pouch won’t fit lipstick but a house key & a keyless car fob does. The strap is adjustable & removable.
chris rice
Comentado en los Estados Unidos el 21 de enero de 2025
Good quality leather and sturdy case for clips on shoulde strap
Bonzaii 5
Comentado en los Estados Unidos el 12 de abril de 2025
This phone case seems well made and it is attractive. All ports are easily accessible. I appreciate the ring stand and cross-body strap is convenient when you don't want to carry a purse or when you have your hands full. I previously had a fold type case and the cards in it were always pushing into the screen and I thought that can't be good for it. It was also unhandy when shooting a photo. I like this all-in-one design. The downside is there is VERY little space in the zippered compartment for bills, let alone a little change. That and not enough capacity for more cards were the only drawbacks to this design. Otherwise, I would give five stars.
Customer
Comentado en los Estados Unidos el 11 de abril de 2025
No es convenience ordinary este item!!!
JeanieOnthego
Comentado en los Estados Unidos el 8 de diciembre de 2024
I’m rarely impressed with something but this product really checks a lot of boxes.Now I can easily carry my credit card, ID and some pocket change without having to carry a whole purse. Plus, I have a great protector for my iPhone, as well as a Stylish gold hoop to put my finger through to securely hold the phone easily. This hoop also serves as a kickstand/easel to stand your phone up.Love the black pleather and gold color fixtures - Not the cheesy silver that makes it look cheap. It also comes with a cool wide strap that you can switch out with some other strap that you prefer. The Small gold hoops are completely sealed with no split in the metal so the hook of your straps will always be hooked and secure Until you unhook it.Don’t wait to purchase this iPhone case/wallet because they often sell out or discontinue for whatever reason.
N
Comentado en Canadá el 23 de octubre de 2024
The unlock and trunk button are so sunk in I can barely press it. The fitment is weird, I think it’s a tad small to fit the transmitter. If I open the shell and I push on the transmitter, the buttons are actually ok to press but with the shell closed, obviously I can’t push it down.The screw also doesn’t go down all the way.
N
Comentado en Canadá el 23 de octubre de 2024
The unlock and trunk button are so sunk in I can barely press it. The fitment is weird, I think it’s a tad small to fit the transmitter. If I open the shell and I push on the transmitter, the buttons are actually ok to press but with the shell closed, obviously I can’t push it down.The screw also doesn’t go down all the way.
N
Comentado en Canadá el 23 de octubre de 2024
The unlock and trunk button are so sunk in I can barely press it. The fitment is weird, I think it’s a tad small to fit the transmitter. If I open the shell and I push on the transmitter, the buttons are actually ok to press but with the shell closed, obviously I can’t push it down.The screw also doesn’t go down all the way.
N
Comentado en Canadá el 23 de octubre de 2024
The unlock and trunk button are so sunk in I can barely press it. The fitment is weird, I think it’s a tad small to fit the transmitter. If I open the shell and I push on the transmitter, the buttons are actually ok to press but with the shell closed, obviously I can’t push it down.The screw also doesn’t go down all the way.
N
Comentado en Canadá el 23 de octubre de 2024
The unlock and trunk button are so sunk in I can barely press it. The fitment is weird, I think it’s a tad small to fit the transmitter. If I open the shell and I push on the transmitter, the buttons are actually ok to press but with the shell closed, obviously I can’t push it down.The screw also doesn’t go down all the way.
N
Comentado en Canadá el 23 de octubre de 2024
The unlock and trunk button are so sunk in I can barely press it. The fitment is weird, I think it’s a tad small to fit the transmitter. If I open the shell and I push on the transmitter, the buttons are actually ok to press but with the shell closed, obviously I can’t push it down.The screw also doesn’t go down all the way.
N
Comentado en Canadá el 23 de octubre de 2024
The unlock and trunk button are so sunk in I can barely press it. The fitment is weird, I think it’s a tad small to fit the transmitter. If I open the shell and I push on the transmitter, the buttons are actually ok to press but with the shell closed, obviously I can’t push it down.The screw also doesn’t go down all the way.
N
Comentado en Canadá el 23 de octubre de 2024
The unlock and trunk button are so sunk in I can barely press it. The fitment is weird, I think it’s a tad small to fit the transmitter. If I open the shell and I push on the transmitter, the buttons are actually ok to press but with the shell closed, obviously I can’t push it down.The screw also doesn’t go down all the way.
Byron C
Comentado en los Estados Unidos el 14 de octubre de 2024
Not OEM exactly but inexpensive and it works. Somewhat difficult to put the key through the sleeve, I had to use pliers.
Byron C
Comentado en los Estados Unidos el 14 de octubre de 2024
Not OEM exactly but inexpensive and it works. Somewhat difficult to put the key through the sleeve, I had to use pliers.
Byron C
Comentado en los Estados Unidos el 14 de octubre de 2024
Not OEM exactly but inexpensive and it works. Somewhat difficult to put the key through the sleeve, I had to use pliers.
Byron C
Comentado en los Estados Unidos el 14 de octubre de 2024
Not OEM exactly but inexpensive and it works. Somewhat difficult to put the key through the sleeve, I had to use pliers.
Byron C
Comentado en los Estados Unidos el 14 de octubre de 2024
Not OEM exactly but inexpensive and it works. Somewhat difficult to put the key through the sleeve, I had to use pliers.
Byron C
Comentado en los Estados Unidos el 14 de octubre de 2024
Not OEM exactly but inexpensive and it works. Somewhat difficult to put the key through the sleeve, I had to use pliers.
Byron C
Comentado en los Estados Unidos el 14 de octubre de 2024
Not OEM exactly but inexpensive and it works. Somewhat difficult to put the key through the sleeve, I had to use pliers.
Byron C
Comentado en los Estados Unidos el 14 de octubre de 2024
Not OEM exactly but inexpensive and it works. Somewhat difficult to put the key through the sleeve, I had to use pliers.
TA62
Comentado en los Estados Unidos el 9 de marzo de 2023
This is not the quality of my orginal Lexus key fob cover, but it works very well and it was easy to put together. My only negative comment is that after putting it together. On the end of the cover where the metal key comes out of, there is a small gap around the end of the cover, tightened it as much as I could with out stripping out the small screw. Cannot get it to seat flush. Also because of this the buttons sit lower in the holes, they are not raised. Still all in all for the price ($), the fob works just fine, so far........
TA62
Comentado en los Estados Unidos el 9 de marzo de 2023
This is not the quality of my orginal Lexus key fob cover, but it works very well and it was easy to put together. My only negative comment is that after putting it together. On the end of the cover where the metal key comes out of, there is a small gap around the end of the cover, tightened it as much as I could with out stripping out the small screw. Cannot get it to seat flush. Also because of this the buttons sit lower in the holes, they are not raised. Still all in all for the price ($), the fob works just fine, so far........
TA62
Comentado en los Estados Unidos el 9 de marzo de 2023
This is not the quality of my orginal Lexus key fob cover, but it works very well and it was easy to put together. My only negative comment is that after putting it together. On the end of the cover where the metal key comes out of, there is a small gap around the end of the cover, tightened it as much as I could with out stripping out the small screw. Cannot get it to seat flush. Also because of this the buttons sit lower in the holes, they are not raised. Still all in all for the price ($), the fob works just fine, so far........
TA62
Comentado en los Estados Unidos el 9 de marzo de 2023
This is not the quality of my orginal Lexus key fob cover, but it works very well and it was easy to put together. My only negative comment is that after putting it together. On the end of the cover where the metal key comes out of, there is a small gap around the end of the cover, tightened it as much as I could with out stripping out the small screw. Cannot get it to seat flush. Also because of this the buttons sit lower in the holes, they are not raised. Still all in all for the price ($), the fob works just fine, so far........
TA62
Comentado en los Estados Unidos el 9 de marzo de 2023
This is not the quality of my orginal Lexus key fob cover, but it works very well and it was easy to put together. My only negative comment is that after putting it together. On the end of the cover where the metal key comes out of, there is a small gap around the end of the cover, tightened it as much as I could with out stripping out the small screw. Cannot get it to seat flush. Also because of this the buttons sit lower in the holes, they are not raised. Still all in all for the price ($), the fob works just fine, so far........
TA62
Comentado en los Estados Unidos el 9 de marzo de 2023
This is not the quality of my orginal Lexus key fob cover, but it works very well and it was easy to put together. My only negative comment is that after putting it together. On the end of the cover where the metal key comes out of, there is a small gap around the end of the cover, tightened it as much as I could with out stripping out the small screw. Cannot get it to seat flush. Also because of this the buttons sit lower in the holes, they are not raised. Still all in all for the price ($), the fob works just fine, so far........
TA62
Comentado en los Estados Unidos el 9 de marzo de 2023
This is not the quality of my orginal Lexus key fob cover, but it works very well and it was easy to put together. My only negative comment is that after putting it together. On the end of the cover where the metal key comes out of, there is a small gap around the end of the cover, tightened it as much as I could with out stripping out the small screw. Cannot get it to seat flush. Also because of this the buttons sit lower in the holes, they are not raised. Still all in all for the price ($), the fob works just fine, so far........
TA62
Comentado en los Estados Unidos el 9 de marzo de 2023
This is not the quality of my orginal Lexus key fob cover, but it works very well and it was easy to put together. My only negative comment is that after putting it together. On the end of the cover where the metal key comes out of, there is a small gap around the end of the cover, tightened it as much as I could with out stripping out the small screw. Cannot get it to seat flush. Also because of this the buttons sit lower in the holes, they are not raised. Still all in all for the price ($), the fob works just fine, so far........
Nathan P.
Comentado en los Estados Unidos el 26 de febrero de 2023
While it does TECHNICALLY fit, it leaves a lot to be desired. Considering this product is just plastic and doesn't require any advanced machining, this was very disappointing.The key blade itself was a nightmare to get into the small plastic holder they provide. I heard of some people soaking it in warm water, or using lube to get the blade in. I used some WD-40 and pliers and got it with some patience.Once you put the fob/transponder in, the casing doesn't close all the way, even after I did some sanding and got it to fight a little bit better, it still will not close all the way. I've concluded the issue is not one of rough edges that can be sanded down, but rather the whole casing itself is just slightly too small to fit it all in there nicely.The buttons are now recessed WAY deeper than the on the original key, which makes pushing the buttons slightly more awkward and annoying since you have to stick you finger IN the slot to push the button, but its still possible.Overall, not sure why this product was so highly rated, perhaps it is just my year and key that it doesn't fit well for. Given the price, I can't be too mad, but I will be looking around for another option, but this will work for the mean time.EDIT: In about April 2023, a year after we bought this product, the whole shell cracked and broke. Horrendous product. Stay away.
Nathan P.
Comentado en los Estados Unidos el 26 de febrero de 2023
While it does TECHNICALLY fit, it leaves a lot to be desired. Considering this product is just plastic and doesn't require any advanced machining, this was very disappointing.The key blade itself was a nightmare to get into the small plastic holder they provide. I heard of some people soaking it in warm water, or using lube to get the blade in. I used some WD-40 and pliers and got it with some patience.Once you put the fob/transponder in, the casing doesn't close all the way, even after I did some sanding and got it to fight a little bit better, it still will not close all the way. I've concluded the issue is not one of rough edges that can be sanded down, but rather the whole casing itself is just slightly too small to fit it all in there nicely.The buttons are now recessed WAY deeper than the on the original key, which makes pushing the buttons slightly more awkward and annoying since you have to stick you finger IN the slot to push the button, but its still possible.Overall, not sure why this product was so highly rated, perhaps it is just my year and key that it doesn't fit well for. Given the price, I can't be too mad, but I will be looking around for another option, but this will work for the mean time.EDIT: In about April 2023, a year after we bought this product, the whole shell cracked and broke. Horrendous product. Stay away.
Nathan P.
Comentado en los Estados Unidos el 26 de febrero de 2023
While it does TECHNICALLY fit, it leaves a lot to be desired. Considering this product is just plastic and doesn't require any advanced machining, this was very disappointing.The key blade itself was a nightmare to get into the small plastic holder they provide. I heard of some people soaking it in warm water, or using lube to get the blade in. I used some WD-40 and pliers and got it with some patience.Once you put the fob/transponder in, the casing doesn't close all the way, even after I did some sanding and got it to fight a little bit better, it still will not close all the way. I've concluded the issue is not one of rough edges that can be sanded down, but rather the whole casing itself is just slightly too small to fit it all in there nicely.The buttons are now recessed WAY deeper than the on the original key, which makes pushing the buttons slightly more awkward and annoying since you have to stick you finger IN the slot to push the button, but its still possible.Overall, not sure why this product was so highly rated, perhaps it is just my year and key that it doesn't fit well for. Given the price, I can't be too mad, but I will be looking around for another option, but this will work for the mean time.EDIT: In about April 2023, a year after we bought this product, the whole shell cracked and broke. Horrendous product. Stay away.
Nathan P.
Comentado en los Estados Unidos el 26 de febrero de 2023
While it does TECHNICALLY fit, it leaves a lot to be desired. Considering this product is just plastic and doesn't require any advanced machining, this was very disappointing.The key blade itself was a nightmare to get into the small plastic holder they provide. I heard of some people soaking it in warm water, or using lube to get the blade in. I used some WD-40 and pliers and got it with some patience.Once you put the fob/transponder in, the casing doesn't close all the way, even after I did some sanding and got it to fight a little bit better, it still will not close all the way. I've concluded the issue is not one of rough edges that can be sanded down, but rather the whole casing itself is just slightly too small to fit it all in there nicely.The buttons are now recessed WAY deeper than the on the original key, which makes pushing the buttons slightly more awkward and annoying since you have to stick you finger IN the slot to push the button, but its still possible.Overall, not sure why this product was so highly rated, perhaps it is just my year and key that it doesn't fit well for. Given the price, I can't be too mad, but I will be looking around for another option, but this will work for the mean time.EDIT: In about April 2023, a year after we bought this product, the whole shell cracked and broke. Horrendous product. Stay away.
Nathan P.
Comentado en los Estados Unidos el 26 de febrero de 2023
While it does TECHNICALLY fit, it leaves a lot to be desired. Considering this product is just plastic and doesn't require any advanced machining, this was very disappointing.The key blade itself was a nightmare to get into the small plastic holder they provide. I heard of some people soaking it in warm water, or using lube to get the blade in. I used some WD-40 and pliers and got it with some patience.Once you put the fob/transponder in, the casing doesn't close all the way, even after I did some sanding and got it to fight a little bit better, it still will not close all the way. I've concluded the issue is not one of rough edges that can be sanded down, but rather the whole casing itself is just slightly too small to fit it all in there nicely.The buttons are now recessed WAY deeper than the on the original key, which makes pushing the buttons slightly more awkward and annoying since you have to stick you finger IN the slot to push the button, but its still possible.Overall, not sure why this product was so highly rated, perhaps it is just my year and key that it doesn't fit well for. Given the price, I can't be too mad, but I will be looking around for another option, but this will work for the mean time.EDIT: In about April 2023, a year after we bought this product, the whole shell cracked and broke. Horrendous product. Stay away.
Nathan P.
Comentado en los Estados Unidos el 26 de febrero de 2023
While it does TECHNICALLY fit, it leaves a lot to be desired. Considering this product is just plastic and doesn't require any advanced machining, this was very disappointing.The key blade itself was a nightmare to get into the small plastic holder they provide. I heard of some people soaking it in warm water, or using lube to get the blade in. I used some WD-40 and pliers and got it with some patience.Once you put the fob/transponder in, the casing doesn't close all the way, even after I did some sanding and got it to fight a little bit better, it still will not close all the way. I've concluded the issue is not one of rough edges that can be sanded down, but rather the whole casing itself is just slightly too small to fit it all in there nicely.The buttons are now recessed WAY deeper than the on the original key, which makes pushing the buttons slightly more awkward and annoying since you have to stick you finger IN the slot to push the button, but its still possible.Overall, not sure why this product was so highly rated, perhaps it is just my year and key that it doesn't fit well for. Given the price, I can't be too mad, but I will be looking around for another option, but this will work for the mean time.EDIT: In about April 2023, a year after we bought this product, the whole shell cracked and broke. Horrendous product. Stay away.
Nathan P.
Comentado en los Estados Unidos el 26 de febrero de 2023
While it does TECHNICALLY fit, it leaves a lot to be desired. Considering this product is just plastic and doesn't require any advanced machining, this was very disappointing.The key blade itself was a nightmare to get into the small plastic holder they provide. I heard of some people soaking it in warm water, or using lube to get the blade in. I used some WD-40 and pliers and got it with some patience.Once you put the fob/transponder in, the casing doesn't close all the way, even after I did some sanding and got it to fight a little bit better, it still will not close all the way. I've concluded the issue is not one of rough edges that can be sanded down, but rather the whole casing itself is just slightly too small to fit it all in there nicely.The buttons are now recessed WAY deeper than the on the original key, which makes pushing the buttons slightly more awkward and annoying since you have to stick you finger IN the slot to push the button, but its still possible.Overall, not sure why this product was so highly rated, perhaps it is just my year and key that it doesn't fit well for. Given the price, I can't be too mad, but I will be looking around for another option, but this will work for the mean time.EDIT: In about April 2023, a year after we bought this product, the whole shell cracked and broke. Horrendous product. Stay away.
Nathan P.
Comentado en los Estados Unidos el 26 de febrero de 2023
While it does TECHNICALLY fit, it leaves a lot to be desired. Considering this product is just plastic and doesn't require any advanced machining, this was very disappointing.The key blade itself was a nightmare to get into the small plastic holder they provide. I heard of some people soaking it in warm water, or using lube to get the blade in. I used some WD-40 and pliers and got it with some patience.Once you put the fob/transponder in, the casing doesn't close all the way, even after I did some sanding and got it to fight a little bit better, it still will not close all the way. I've concluded the issue is not one of rough edges that can be sanded down, but rather the whole casing itself is just slightly too small to fit it all in there nicely.The buttons are now recessed WAY deeper than the on the original key, which makes pushing the buttons slightly more awkward and annoying since you have to stick you finger IN the slot to push the button, but its still possible.Overall, not sure why this product was so highly rated, perhaps it is just my year and key that it doesn't fit well for. Given the price, I can't be too mad, but I will be looking around for another option, but this will work for the mean time.EDIT: In about April 2023, a year after we bought this product, the whole shell cracked and broke. Horrendous product. Stay away.
Joaquín
Comentado en México el 27 de marzo de 2022
No ajusta perfectamente, tu e que adaptar un poco, no cierra al 100%
Joaquín
Comentado en México el 27 de marzo de 2022
No ajusta perfectamente, tu e que adaptar un poco, no cierra al 100%
Joaquín
Comentado en México el 27 de marzo de 2022
No ajusta perfectamente, tu e que adaptar un poco, no cierra al 100%
Joaquín
Comentado en México el 27 de marzo de 2022
No ajusta perfectamente, tu e que adaptar un poco, no cierra al 100%
Joaquín
Comentado en México el 27 de marzo de 2022
No ajusta perfectamente, tu e que adaptar un poco, no cierra al 100%
Joaquín
Comentado en México el 27 de marzo de 2022
No ajusta perfectamente, tu e que adaptar un poco, no cierra al 100%
Joaquín
Comentado en México el 27 de marzo de 2022
No ajusta perfectamente, tu e que adaptar un poco, no cierra al 100%
Joaquín
Comentado en México el 27 de marzo de 2022
No ajusta perfectamente, tu e que adaptar un poco, no cierra al 100%
Productos recomendados
Mex $711.85
Mex $ 391 .00 Mex $391.00
Mex $327.00
Mex $ 176 .00 Mex $176.00
Mex $229.99
Mex $ 128 .00 Mex $128.00
Mex $440.76
Mex $ 242 .00 Mex $242.00