No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Hailie N
Comentado en Canadá el 11 de diciembre de 2024
I assumed this would fit the lids from my pot set but it is meant only for large lids. The product itself seems well made. They only give you longer screws with drywall anchors so you can’t mount it to the inside of a cabinet door like shown in the product pictures.
Mindy F
Comentado en los Estados Unidos el 19 de abril de 2022
These came with both long and short screws as well as wall anchors to fit any type of installation. I used the short screws on my cabinet doors. It was so easy! I just power drilled them in and done!The racks are both very sturdy and designed to fit well in cabinet space, allowing for large lids and closure. I fit 13" large lid with plenty of room. Lids don't fall out the bottom or roll around when the door is moved. I fit all 9 of my skillet and pot lids on these 2 racks, without being jammed together. Easy to remove and restock. Would purchase again. So much better than stacking them on the shelf!! I love these.
vanessa
Comentado en los Estados Unidos el 12 de enero de 2021
This lid rack is quite sturdy, and easy enough to install, but there is a design flaw. We woud like our heavy kitchen equipment to easily install to a stud, however we had to hang it on an extension for support. This makes it most difficult to place where i want it, as the stud can only be placed at the lower mark of the rack, leaving the top too heavy for the wall to support the weight properly. Of course each rack can only hold 3 lids of the appropriate size/design for the holder to work. Smaller lids, stock pot lids, and awkward shaped handles cannot fit properly. It still works how i have mine set up, and it was a pretty fair price, so i have minimal complaints- more like suggestions.
ANA GRACIELA FERNANDEZ
Comentado en México el 5 de mayo de 2020
Muy buen producto y el envío excelente
Squishy Panda
Comentado en Canadá el 13 de noviembre de 2020
I have been using these daily for a few months now and it has changed the entire flow of my kitchen for the better.I was impressed with how well they were packaged. The tight zip ties held them together nicely to create a stronger structure with the two pieces so they didn't get crushed or dented in transport. They used plastic wrap to package them so nothing fancy but it honestly isn't necessary for any more packaging.The screw options were great. They came with both dry wall plugs and screws or wood screws. They are fairly light weight so holding them in place to get your marks for the screws was simple with one person.Once installed, they are very sturdy. I even use them for a few small pans that I have a hard time fitting in my cupboards. The divits hold lids with both handles or knobs. If you have handled lids, they do tend to slide around a bit if you move them around. It isn't much of a concern for them falling, even when installed on the wall. For the really small lids, there is an extra spot near the top where you can sneak them in which has given me 2 additional spots to hold lids. They do sit out on a fairly decent angle, so I'd take into consideration how big your lids are in comparison to how much room you have in the space you plan on installing them.Overall, these are the lid holders I didn't know I needed before I had them. A seemingly simple kitchen organizer can make a massive difference, especially in a smaller kitchen
Jadlem
Comentado en los Estados Unidos el 13 de noviembre de 2018
My husband installed these racks side by side on the wall in our laundry room off of the kitchen. I was able to fit 6 large lids into them. They seem to be working well although I rarely use these lids so I don’t insert and remove them often. The racks themselves seem sturdy but time will tell. They are fairly deep and do stick out from the wall more than I had hoped. They seem to work well with 12” lids but the small 1 quart size lid doesn’t seem to work. This is ok with me because I wanted these so the large lids could be organized and easy to get to. I would have liked to insert my glass Corning lids also but we were afraid to put too many “glass heavier” lids into the racks for fear of the anchors pulling out of the wall and falling to the floor and breaking the lids. We couldn’t find a weight restriction on the instructions. The screws included were short and my husband needed to use his own to get them into the studs in one spot. Hopefully the anchors will hold and not come out of the Sheetrock. Therefore my rating of 4 stars.
Productos recomendados
Mex $189.00
Mex $ 96 .00 Mex $96.00
Mex $580.00
Mex $ 284 .00 Mex $284.00