Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

SmoTecQ 12 Volt DC Switching Power Supply for 3528 Led Strip Lights, CCTV Camera

Envío gratis en pedidos superiores a Mex $600.00

Mex $9,899.00

Mex $ 1,881 .00 Mex $1,881.00

En stock

1.Tamaño:12v-2a 2pack


Acerca de este artículo

  • Compatibilidad versátil: perfecto para alimentar electrónica de 12 V como cámaras de seguridad CCTV, tiras de luces LED, routers, impresoras, extractor de leche y otros dispositivos que requieren 12 V y menos de 2 amperios.
  • Paquete doble para mayor comodidad: viene con dos adaptadores de alta calidad, cada uno con una longitud de cable de 1,2 m. Asegúrate de tener una copia de seguridad o una fuente de alimentación adicional para tus dispositivos.
  • Aprobado por la FCC y certificado de seguridad: cumple con altos estándares de seguridad con protección integrada contra sobrecorriente, cortocircuito y sobrevoltaje, lo que te da tranquilidad mientras usas tus dispositivos.
  • Punta estándar de 5,5 x 2,1 mm. Compatible con una amplia gama de dispositivos de 12 V que utilizan el diámetro exterior estándar de 5,5 mm y conector de diámetro interior de 2,1 mm.
  • Duradero y duradero: fabricado con materiales de alta calidad para un rendimiento duradero, asegurando que sus dispositivos permanezcan alimentados durante años.


Adaptador de fuente de alimentación conmutada de 12 V 2 A, paquete de 2,
Enchufe de pared de 5,5 x 2,1 mm DC Power US
entrada de voltaje: 100-240 V CA.
Voltaje de salida: 12 V CC 2000 mA.
Idea para cámara CCTV, amplificador de audio, HUB, enrutador y tira de luces LED de bajo voltaje de un solo color 3528/5050
Ten en cuenta que el máximo vatio total de este adaptador no debe exceder los 24 vatios.
Cómo encontrar el adaptador de corriente correcto para tu dispositivo eléctrico
Lo único que necesitas saber es el voltaje del dispositivo/voltios (V) y amperaje / amperios (A), este adaptador es de 12 voltios/2 amperios. Asegúrate de que la fuente de alimentación de tu dispositivo sea CC 12 V 2 A también


Luis
Comentado en los Estados Unidos el 2 de enero de 2025
I failed to double check but I just dislike the fact that the prongs don’t lay sideways so it’s a bit awkward trying to fit my other plugs in the outlets
Mobius
Comentado en los Estados Unidos el 1 de abril de 2025
these work great... as advertised
Kid Mars
Comentado en los Estados Unidos el 11 de noviembre de 2024
I needed a low current 12 VDC power adaptor that I could splice to a Marine LED lamp. This met the requirement and easily spliced into the small gauge wire on the LED lamp. The output was a steady 12 VDC which I needed.
IT Paul S
Comentado en los Estados Unidos el 2 de abril de 2024
I wrote a one star review for this product. My voltmeter showed these power supplies had an output of 32VDC. I was really mad. I decided that all power supplies probably had a similar problem, so I bought a nice 12VDC 2A voltage regulator with a nice LED readout showing the input and output voltage. It supported input voltages as high as 40VDC with an adjustment to set it to 12VDC output.I connected this power supply to the voltage regulator and the voltage regulator showed 12.4VDC as its input. Wait!! My trusty old voltmeter, with a new battery showed 32VDC. I ordered a new voltmeter on Amazon and the new voltmeter showed 12.4VDC for the output of these power supplies.I feel bad. I gave this product a 1-star rating and it wasn't a problem with this product. Instead my trusty, 20-year-old voltmeter let me down. I introduced it to my garbage collector and he took it to -- wherever they take my garbage.And now, I have rewritten this review as a 5-star review. These power supplies work great. Buy one. Buy two. Oh wait, they come 2 to the package. Buy two packages.Actually, I chose these power supplies because they are a single block plug with the wire. So many 12V power supplies have a standard wall plug and a wire that connects to a separate block which then connects to a wire that goes to the device. That's too much wire to have to deal with. I wanted a block that plugs into the wall. This is perfect.
Ric P.
Comentado en los Estados Unidos el 15 de diciembre de 2023
When I replaced the LED's in two 15 plus year old inflatables I ran into an Amperage problem.The original adapters were rated to barely meet the fans' needs.Now /w triple LED replacements the plugs got warm/hot fast!These Power adapters at 2.0 amps solved the issue perfectly.The Barrel Plug Adapter makes it a snap to snip the old plug wire and replace.As I am using them outside I did add a bit of liquid tape to them as weather proofing.When I take down the Christmas display I can just unplug at the Barrel and store them away.(At that time I will remove screw type barrel adapter w/ a permanent female barrel, then solder and 'shrink' the cord.)This will allow me to use these 2 amp plugs for other applications like my Halloween Display.I have had issues before, in other DC Adapters, w/ the area where the cord enters the adapter.If they are going to be pulled on or plugged/unplugged at lot they can get a bit loose.So I added a little hot glue purely as a preventive.The two smaller inflatables here are drawing just 1.9 amps in total w/ the new triple LED's.There old adapters were rated at 1.0 and .6 amps.......These 2 new DC 2.0 amp adapters don't even get warm.
Productos recomendados

Mex $273.39

Mex $ 161 .00 Mex $161.00

4.3
Elegir