No hay artículos en el carro
No hay artículos en el carroEl soporte de micrófono perfecto para magos de escenario que solo necesitas llevarlo alrededor de tu cuello con sus imanes fuertes. Ajustable: puedes ajustar no solo el alambre de acero, sino también el ángulo de tu micrófono. Firme: algunas ranuras dentro del soporte aumentan la fricción y evitan que el micrófono se deslice hacia abajo o se mueva. - Y los imanes en la conexión aseguran que el soporte esté colgado alrededor del cuello de forma segura.
KAGE3
Comentado en los Estados Unidos el 26 de marzo de 2025
easy to install. Comes with two different size levers for different width doors. This makes a big difference when installing.
Rosemary Garcia
Comentado en los Estados Unidos el 25 de febrero de 2025
It took a little finagling because the pre-existing "plate" on the door jam that the latch hooks into was a little off. We fixed that by "raising" or extending it with a couple of washers and then it latched perfectly. The packaging includes extra screws of different lengths and extra latch handles to try with your particular door. Very happy with our choice.
Katherine McConaghie
Comentado en Canadá el 27 de agosto de 2024
This item is not made very well. The locking mechanism bent very easily while engaging and disengaging the walk once installed, which created problems the screws that were provided with the are Very cheaply made, and became stripped very easily utilizing a screwdriver, the proper size which created problems during the installation to the point that I removed the whole handle and discarded it overall not very happy with this product. Would not recommend buying this product to anyone.
luco
Comentado en Canadá el 25 de noviembre de 2024
L'ensemble a bien fonctionné sur ma vieille porte-patio sauf que la longueur des vis de la nouvelle poignée étaient de 2 pouces seulement et vu la nouvelle construction de la poignée vs mon ancienne, il manquait ½pouce pour rejoindre la 2e partie extérieure de la poignée avec la serrure. J'ai donc trouvé des vis de 2pouces½ et j'ai gardé la vieille poignée intérieure avec le clapet et ajouté juste la partie extérieure avec la clé dont j'avais besoin. Aucune autre manipulation n'a été nécessaire, l'installation a pris 10 minutes! Je recommande! +++ Le prix est excellent!
Fayaaz
Comentado en Canadá el 23 de octubre de 2024
Nice strong and well built lock. Good build quality and easy to install
Terry Collinge
Comentado en Canadá el 24 de diciembre de 2022
Thought it would be a good product. But when I tried to adjust it for the mic . It broke at the base
Terry Collinge
Comentado en Canadá el 24 de diciembre de 2022
Thought it would be a good product. But when I tried to adjust it for the mic . It broke at the base
Terry Collinge
Comentado en Canadá el 24 de diciembre de 2022
Thought it would be a good product. But when I tried to adjust it for the mic . It broke at the base
Terry Collinge
Comentado en Canadá el 24 de diciembre de 2022
Thought it would be a good product. But when I tried to adjust it for the mic . It broke at the base
Terry Collinge
Comentado en Canadá el 24 de diciembre de 2022
Thought it would be a good product. But when I tried to adjust it for the mic . It broke at the base
Terry Collinge
Comentado en Canadá el 24 de diciembre de 2022
Thought it would be a good product. But when I tried to adjust it for the mic . It broke at the base
Terry Collinge
Comentado en Canadá el 24 de diciembre de 2022
Thought it would be a good product. But when I tried to adjust it for the mic . It broke at the base
Terry Collinge
Comentado en Canadá el 24 de diciembre de 2022
Thought it would be a good product. But when I tried to adjust it for the mic . It broke at the base
jbird
Comentado en los Estados Unidos el 3 de octubre de 2022
Before I got to use it, the neck braces were too close together. While separating them the right next brace broke. I gorilla glued back in and it worked for one gig but then broke again. Very fragile.
jbird
Comentado en los Estados Unidos el 3 de octubre de 2022
Before I got to use it, the neck braces were too close together. While separating them the right next brace broke. I gorilla glued back in and it worked for one gig but then broke again. Very fragile.
jbird
Comentado en los Estados Unidos el 3 de octubre de 2022
Before I got to use it, the neck braces were too close together. While separating them the right next brace broke. I gorilla glued back in and it worked for one gig but then broke again. Very fragile.
jbird
Comentado en los Estados Unidos el 3 de octubre de 2022
Before I got to use it, the neck braces were too close together. While separating them the right next brace broke. I gorilla glued back in and it worked for one gig but then broke again. Very fragile.
jbird
Comentado en los Estados Unidos el 3 de octubre de 2022
Before I got to use it, the neck braces were too close together. While separating them the right next brace broke. I gorilla glued back in and it worked for one gig but then broke again. Very fragile.
jbird
Comentado en los Estados Unidos el 3 de octubre de 2022
Before I got to use it, the neck braces were too close together. While separating them the right next brace broke. I gorilla glued back in and it worked for one gig but then broke again. Very fragile.
jbird
Comentado en los Estados Unidos el 3 de octubre de 2022
Before I got to use it, the neck braces were too close together. While separating them the right next brace broke. I gorilla glued back in and it worked for one gig but then broke again. Very fragile.
jbird
Comentado en los Estados Unidos el 3 de octubre de 2022
Before I got to use it, the neck braces were too close together. While separating them the right next brace broke. I gorilla glued back in and it worked for one gig but then broke again. Very fragile.
David May
Comentado en los Estados Unidos el 18 de octubre de 2022
This thing is a real cheap piece of crap. Broke the first time I touched it. Too small to be of any use at all. Run away!
David May
Comentado en los Estados Unidos el 18 de octubre de 2022
This thing is a real cheap piece of crap. Broke the first time I touched it. Too small to be of any use at all. Run away!
David May
Comentado en los Estados Unidos el 18 de octubre de 2022
This thing is a real cheap piece of crap. Broke the first time I touched it. Too small to be of any use at all. Run away!
David May
Comentado en los Estados Unidos el 18 de octubre de 2022
This thing is a real cheap piece of crap. Broke the first time I touched it. Too small to be of any use at all. Run away!
David May
Comentado en los Estados Unidos el 18 de octubre de 2022
This thing is a real cheap piece of crap. Broke the first time I touched it. Too small to be of any use at all. Run away!
David May
Comentado en los Estados Unidos el 18 de octubre de 2022
This thing is a real cheap piece of crap. Broke the first time I touched it. Too small to be of any use at all. Run away!
David May
Comentado en los Estados Unidos el 18 de octubre de 2022
This thing is a real cheap piece of crap. Broke the first time I touched it. Too small to be of any use at all. Run away!
David May
Comentado en los Estados Unidos el 18 de octubre de 2022
This thing is a real cheap piece of crap. Broke the first time I touched it. Too small to be of any use at all. Run away!
jimmykicker
Comentado en los Estados Unidos el 18 de enero de 2022
First let me say that this thing comes from China. Had I known that, I would have never ordered this. Why? Because I'd be convinced it was junky at best. I wasn't surprised when it arrived like 6 weeks later.I only got this so that I could stand out in front of the band and see what my mic sounds like during soundcheck and then my mic goes back on the stand. I wouldn't ever consider using this for any other purpose because quite frankly? You'll look like the dork king.Good. The magnets are decent, and it holds the mic well enough to get through sound check. Pretty stiff neck mount which is what you want. Holds position well.Cons. The clip that is on it is glued onto the mount and is not removable. To call this clip cheap is the understatement of the century. So if you break the clip? You're outta luck. Guess what I did? I broke it clean off. 20 minutes after unboxing it. Rather than wait another month and a half for a replacement that is going to be the same story, I used a threaded desk mount and epoxied it to the stub that remained. This fixed the problem of a non replaceable mount too. Clip breaks? Put another one on it.Overall, don't expect much from this. And using it for anything other than testing purposes is quite frankly dumb. Why? There's many lavalier type wireless mics available at a reasonable price which makes this a ridiculous option for a wireless mic.
jimmykicker
Comentado en los Estados Unidos el 18 de enero de 2022
First let me say that this thing comes from China. Had I known that, I would have never ordered this. Why? Because I'd be convinced it was junky at best. I wasn't surprised when it arrived like 6 weeks later.I only got this so that I could stand out in front of the band and see what my mic sounds like during soundcheck and then my mic goes back on the stand. I wouldn't ever consider using this for any other purpose because quite frankly? You'll look like the dork king.Good. The magnets are decent, and it holds the mic well enough to get through sound check. Pretty stiff neck mount which is what you want. Holds position well.Cons. The clip that is on it is glued onto the mount and is not removable. To call this clip cheap is the understatement of the century. So if you break the clip? You're outta luck. Guess what I did? I broke it clean off. 20 minutes after unboxing it. Rather than wait another month and a half for a replacement that is going to be the same story, I used a threaded desk mount and epoxied it to the stub that remained. This fixed the problem of a non replaceable mount too. Clip breaks? Put another one on it.Overall, don't expect much from this. And using it for anything other than testing purposes is quite frankly dumb. Why? There's many lavalier type wireless mics available at a reasonable price which makes this a ridiculous option for a wireless mic.
jimmykicker
Comentado en los Estados Unidos el 18 de enero de 2022
First let me say that this thing comes from China. Had I known that, I would have never ordered this. Why? Because I'd be convinced it was junky at best. I wasn't surprised when it arrived like 6 weeks later.I only got this so that I could stand out in front of the band and see what my mic sounds like during soundcheck and then my mic goes back on the stand. I wouldn't ever consider using this for any other purpose because quite frankly? You'll look like the dork king.Good. The magnets are decent, and it holds the mic well enough to get through sound check. Pretty stiff neck mount which is what you want. Holds position well.Cons. The clip that is on it is glued onto the mount and is not removable. To call this clip cheap is the understatement of the century. So if you break the clip? You're outta luck. Guess what I did? I broke it clean off. 20 minutes after unboxing it. Rather than wait another month and a half for a replacement that is going to be the same story, I used a threaded desk mount and epoxied it to the stub that remained. This fixed the problem of a non replaceable mount too. Clip breaks? Put another one on it.Overall, don't expect much from this. And using it for anything other than testing purposes is quite frankly dumb. Why? There's many lavalier type wireless mics available at a reasonable price which makes this a ridiculous option for a wireless mic.
jimmykicker
Comentado en los Estados Unidos el 18 de enero de 2022
First let me say that this thing comes from China. Had I known that, I would have never ordered this. Why? Because I'd be convinced it was junky at best. I wasn't surprised when it arrived like 6 weeks later.I only got this so that I could stand out in front of the band and see what my mic sounds like during soundcheck and then my mic goes back on the stand. I wouldn't ever consider using this for any other purpose because quite frankly? You'll look like the dork king.Good. The magnets are decent, and it holds the mic well enough to get through sound check. Pretty stiff neck mount which is what you want. Holds position well.Cons. The clip that is on it is glued onto the mount and is not removable. To call this clip cheap is the understatement of the century. So if you break the clip? You're outta luck. Guess what I did? I broke it clean off. 20 minutes after unboxing it. Rather than wait another month and a half for a replacement that is going to be the same story, I used a threaded desk mount and epoxied it to the stub that remained. This fixed the problem of a non replaceable mount too. Clip breaks? Put another one on it.Overall, don't expect much from this. And using it for anything other than testing purposes is quite frankly dumb. Why? There's many lavalier type wireless mics available at a reasonable price which makes this a ridiculous option for a wireless mic.
jimmykicker
Comentado en los Estados Unidos el 18 de enero de 2022
First let me say that this thing comes from China. Had I known that, I would have never ordered this. Why? Because I'd be convinced it was junky at best. I wasn't surprised when it arrived like 6 weeks later.I only got this so that I could stand out in front of the band and see what my mic sounds like during soundcheck and then my mic goes back on the stand. I wouldn't ever consider using this for any other purpose because quite frankly? You'll look like the dork king.Good. The magnets are decent, and it holds the mic well enough to get through sound check. Pretty stiff neck mount which is what you want. Holds position well.Cons. The clip that is on it is glued onto the mount and is not removable. To call this clip cheap is the understatement of the century. So if you break the clip? You're outta luck. Guess what I did? I broke it clean off. 20 minutes after unboxing it. Rather than wait another month and a half for a replacement that is going to be the same story, I used a threaded desk mount and epoxied it to the stub that remained. This fixed the problem of a non replaceable mount too. Clip breaks? Put another one on it.Overall, don't expect much from this. And using it for anything other than testing purposes is quite frankly dumb. Why? There's many lavalier type wireless mics available at a reasonable price which makes this a ridiculous option for a wireless mic.
jimmykicker
Comentado en los Estados Unidos el 18 de enero de 2022
First let me say that this thing comes from China. Had I known that, I would have never ordered this. Why? Because I'd be convinced it was junky at best. I wasn't surprised when it arrived like 6 weeks later.I only got this so that I could stand out in front of the band and see what my mic sounds like during soundcheck and then my mic goes back on the stand. I wouldn't ever consider using this for any other purpose because quite frankly? You'll look like the dork king.Good. The magnets are decent, and it holds the mic well enough to get through sound check. Pretty stiff neck mount which is what you want. Holds position well.Cons. The clip that is on it is glued onto the mount and is not removable. To call this clip cheap is the understatement of the century. So if you break the clip? You're outta luck. Guess what I did? I broke it clean off. 20 minutes after unboxing it. Rather than wait another month and a half for a replacement that is going to be the same story, I used a threaded desk mount and epoxied it to the stub that remained. This fixed the problem of a non replaceable mount too. Clip breaks? Put another one on it.Overall, don't expect much from this. And using it for anything other than testing purposes is quite frankly dumb. Why? There's many lavalier type wireless mics available at a reasonable price which makes this a ridiculous option for a wireless mic.
jimmykicker
Comentado en los Estados Unidos el 18 de enero de 2022
First let me say that this thing comes from China. Had I known that, I would have never ordered this. Why? Because I'd be convinced it was junky at best. I wasn't surprised when it arrived like 6 weeks later.I only got this so that I could stand out in front of the band and see what my mic sounds like during soundcheck and then my mic goes back on the stand. I wouldn't ever consider using this for any other purpose because quite frankly? You'll look like the dork king.Good. The magnets are decent, and it holds the mic well enough to get through sound check. Pretty stiff neck mount which is what you want. Holds position well.Cons. The clip that is on it is glued onto the mount and is not removable. To call this clip cheap is the understatement of the century. So if you break the clip? You're outta luck. Guess what I did? I broke it clean off. 20 minutes after unboxing it. Rather than wait another month and a half for a replacement that is going to be the same story, I used a threaded desk mount and epoxied it to the stub that remained. This fixed the problem of a non replaceable mount too. Clip breaks? Put another one on it.Overall, don't expect much from this. And using it for anything other than testing purposes is quite frankly dumb. Why? There's many lavalier type wireless mics available at a reasonable price which makes this a ridiculous option for a wireless mic.
jimmykicker
Comentado en los Estados Unidos el 18 de enero de 2022
First let me say that this thing comes from China. Had I known that, I would have never ordered this. Why? Because I'd be convinced it was junky at best. I wasn't surprised when it arrived like 6 weeks later.I only got this so that I could stand out in front of the band and see what my mic sounds like during soundcheck and then my mic goes back on the stand. I wouldn't ever consider using this for any other purpose because quite frankly? You'll look like the dork king.Good. The magnets are decent, and it holds the mic well enough to get through sound check. Pretty stiff neck mount which is what you want. Holds position well.Cons. The clip that is on it is glued onto the mount and is not removable. To call this clip cheap is the understatement of the century. So if you break the clip? You're outta luck. Guess what I did? I broke it clean off. 20 minutes after unboxing it. Rather than wait another month and a half for a replacement that is going to be the same story, I used a threaded desk mount and epoxied it to the stub that remained. This fixed the problem of a non replaceable mount too. Clip breaks? Put another one on it.Overall, don't expect much from this. And using it for anything other than testing purposes is quite frankly dumb. Why? There's many lavalier type wireless mics available at a reasonable price which makes this a ridiculous option for a wireless mic.
R.C.
Comentado en los Estados Unidos el 10 de julio de 2021
Since I'm using unidirectional mics and using them for singing, I needed the mic to be able to come in a horizontal position to my mouth. And I couldn't achieve that because the length of it was too short.But it would probably work for just a speaker.
R.C.
Comentado en los Estados Unidos el 10 de julio de 2021
Since I'm using unidirectional mics and using them for singing, I needed the mic to be able to come in a horizontal position to my mouth. And I couldn't achieve that because the length of it was too short.But it would probably work for just a speaker.
R.C.
Comentado en los Estados Unidos el 10 de julio de 2021
Since I'm using unidirectional mics and using them for singing, I needed the mic to be able to come in a horizontal position to my mouth. And I couldn't achieve that because the length of it was too short.But it would probably work for just a speaker.
R.C.
Comentado en los Estados Unidos el 10 de julio de 2021
Since I'm using unidirectional mics and using them for singing, I needed the mic to be able to come in a horizontal position to my mouth. And I couldn't achieve that because the length of it was too short.But it would probably work for just a speaker.
R.C.
Comentado en los Estados Unidos el 10 de julio de 2021
Since I'm using unidirectional mics and using them for singing, I needed the mic to be able to come in a horizontal position to my mouth. And I couldn't achieve that because the length of it was too short.But it would probably work for just a speaker.
R.C.
Comentado en los Estados Unidos el 10 de julio de 2021
Since I'm using unidirectional mics and using them for singing, I needed the mic to be able to come in a horizontal position to my mouth. And I couldn't achieve that because the length of it was too short.But it would probably work for just a speaker.
R.C.
Comentado en los Estados Unidos el 10 de julio de 2021
Since I'm using unidirectional mics and using them for singing, I needed the mic to be able to come in a horizontal position to my mouth. And I couldn't achieve that because the length of it was too short.But it would probably work for just a speaker.
R.C.
Comentado en los Estados Unidos el 10 de julio de 2021
Since I'm using unidirectional mics and using them for singing, I needed the mic to be able to come in a horizontal position to my mouth. And I couldn't achieve that because the length of it was too short.But it would probably work for just a speaker.
Productos recomendados
Mex $154.41
Mex $ 91 .00 Mex $91.00
Mex $496.81
Mex $ 228 .00 Mex $228.00
Mex $287.09
Mex $ 143 .00 Mex $143.00
Mex $86.99
Mex $ 48 .00 Mex $48.00
Mex $341.71
Mex $ 177 .00 Mex $177.00
Mex $202.00
Mex $ 107 .00 Mex $107.00