Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Sound Town Amplificador de potencia ligero de 1U de 2 canales PA/DJ, 2 x 1150 W a 4 ohmios para instalación, conferencia (UPDM-D3)

Envío gratis en pedidos superiores a Mex $600.00

Mex $5,472.47

Mex $ 1,881 .00 Mex $1,881.00

En stock

1.Tamaño:2 X 1150w@ 4-ohm


  • Salida de potencia eficiente: el Sound Town UPDM-D3 es un amplificador de 2 canales, capaz de alimentar 2 x 1150W RMS a 4Ω y 2 x 600W RMS a 8Ω, ofreciendo una salida de potencia masiva pero eficiente
  • Amplificador de clase D de borde de corte: utilizando tecnología de amplificador de clase D, permite un diseño ligero con una excelente eficiencia energética, ofreciendo un rendimiento inigualable
  • Conectividad XLR/SPEAKON: Conéctese con sus altavoces y subwoofers con facilidad utilizando 2 entradas XLR y 2 salidas Speakon. El interruptor estéreo/paralelo dirige eficazmente el flujo de señal, proporcionando diversos efectos de audio
  • Protección confiable: el amplificador UPDM-D3 está protegido con funciones de protección de sobrecarga, sobrecalentamiento y cortocircuito que incluyen un soporte de fusibles y LED de alimentación/señal/sobrecarga/medidor/protección. Un retardo de arranque de 3 segundos y un limitador integrado garantiza una activación suave y evita distorsiones
  • Construcción robusta: el duradero chasis de montaje en rack de 1U cuenta con una construcción de metal duradero, construido para soportar los requisitos más exigentes con una durabilidad duradera


Sound Town Amplificador de potencia ligero de 1U de 2 canales PA/DJ, 2 x 1150 W a 4 ohmios para instalación, conferencia (UPDM-D3)

El Sound Town UPDM-D3 destaca por ser un amplificador de 2 canales diseñado para ofrecer potencia y eficiencia. Con la capacidad de producir 2 x 1150W RMS a 4Ω y 2 x 600W RMS a 8Ω, promete una salida de potencia masiva pero eficiente. Esta unidad de vanguardia emplea tecnología de amplificador de clase D, que no solo facilita un diseño ligero, sino que también garantiza una eficiencia energética notable, estableciendo un punto de referencia para un rendimiento inigualable.

Cuando se trata de conectividad, el UPDM-D3 lo tiene cubierto. Con 2 entradas XLR y 2 salidas Speakon, la conexión a tus altavoces y subwoofers se vuelve sin esfuerzo. Además, el interruptor STEREO/PARALEL canaliza eficazmente el flujo de señal, ofreciendo una gama de efectos de audio para satisfacer sus necesidades. Pero la potencia y el rendimiento no son todos; la seguridad y la fiabilidad son primordiales.

Es por eso que el UPDM-D3 está equipado con una variedad de funciones de protección, incluyendo salvaguardias contra sobrecarga, sobrecalentamiento y cortocircuitos. La unidad viene con un soporte de fusibles dedicado y una variedad de LED que indican potencia, señal, sobrecarga, medidor y protección. Un retardo de arranque de 3 segundos, junto con un limitador integrado, garantiza una activación suave y sin distorsiones en todo momento. Ubicado en un robusto chasis de montaje en rack de 1U, el amplificador UPDM-D3 cuenta con una construcción metálica duradera, lo que garantiza una durabilidad duradera incluso bajo las demandas más rigurosas.


Daniel Meier
Comentado en los Estados Unidos el 25 de enero de 2025
1st one came damaged and non-functional but was quickly replaced with a new one that worked as advertised.
Scotty brews
Comentado en los Estados Unidos el 10 de febrero de 2024
Only 2 channel play. I've tried every change possible to try get channel 3-4 to function. Very disappointed in false claims 600 Watts rms power to 4 separate channels with only 2 operational and those sound great but have not put my speakers to workout more like typical 100 watt reciever output. I should have known better when its too good to be true, its usually too good to be true!! returning amp! Amp was returned and accepted on Feb 26th, have talked to Amazon bout refund first told will take few days, then earlier this morning told I'd have refund in next hour or two, then the return page went from returned to asking if I want to return item again and what is my reason. Next phone call to customer service says I won't get refund until almost end of March. AMAZON has become a shady company to shop with!!
Nestor peña
Comentado en México el 5 de febrero de 2023
Sueña muy bien los probé con unas Yamaha y se escuchan muy bie lo único es que al subirle se baja la luz eléctrica de la casa peroEs muy potente
Dennis Peek
Comentado en los Estados Unidos el 5 de noviembre de 2022
I run a small sound company that does about 15 concerts and festivals a year. I have to run sound in a 360 degree setup which can be challenging. I use this amp to power 4 -12" two way Mackies, covering about 500 people, and it has performed excellently. I received more complements on my sound this year, than any of the past 20 years. I used it all year, pushed more than my previous amp (QSC) and it performed better. I am able to send individual signals to each speaker and control the sound much better. It only takes up one rack space and is very lightweight. I will probably buy another one very soon.
David Strebe
Comentado en los Estados Unidos el 7 de agosto de 2021
I am a pro audio professional. I work with bands and DJs. I know that sound town is not really a respected “pro” brand. It’s kind of “cheapo”. Like Gemini or American DJ or something like that.But…I just needed something in my little test rack that i keep just inside my garage door so I could plug in and quickly test speakers as they came back from each gig. It didn’t have to be great. It just had to work.I have to say, that I am actually very impressed with how this amplifier sounds, considering how small it is, and how reliable it has been so far. I use it for testing everything from subwoofers to stage monitors to full range speakers. I even use it to test out active three-way larger PA speakers so each channel is doing a separate frequency range, I.e. external sub channel 1, lows ch2, mids ch3, highs ch4. Not only does it do all of this without any issues, but it seems to be loud as hell with plenty of headroom. I haven’t taken this to a gig, because I use QSC and Powersoft for the real gigs, but this little amp is worth a look if you are a small DJ or band on a budget.It’s actually hard to believe how much output this thing has while still being small enough to put in a backpack. Amazing.
Linc
Comentado en Canadá el 24 de junio de 2021
I purchased this AMP after my Behringer iNuke 6000 stop working after only 5 short years. Also wanted a change from my old Nikko and Peavey AMPs. Never heard of Sound Town amp but decided to give it a go. Folks that little thing have some sting. I call it the "Scorpion". Small but its punch is deadly. It has brought my system alive. I am running it with some Bose 901 latest series V2, also tried it with some JBLs and some custom-build that I made some years ago.The clarity is clearly noticeable. Great sound through the entire music spectrum. I am about to purchase #2.
Productos recomendados

Mex $1,693.77

Mex $ 829 .00 Mex $829.00

4.6
Elegir

Mex $15,390.00

Mex $ 1,881 .00 Mex $1,881.00

4.6
Elegir

Mex $6,569.00

Mex $ 1,881 .00 Mex $1,881.00

4.3
Elegir

Mex $5,252.35

Mex $ 1,881 .00 Mex $1,881.00

4.7
Elegir

Mex $5,545.49

Mex $ 1,881 .00 Mex $1,881.00

4.3
Elegir

Mex $1,632.20

Mex $ 701 .00 Mex $701.00

4.9
Elegir

Mex $18,713.01

Mex $ 1,881 .00 Mex $1,881.00

4.7
Elegir