No hay artículos en el carro
No hay artículos en el carroMás información del producto
Build a RAID array to enhance system performance
The dual M.2 to SATA adapter supports multiple RAID modes (RAID 0, 1, BIG) helping you to achieve greater SSD capacity or data redundancy, depending on your selected RAID mode. The SSD adapter also supports non-RAID operation (JBOD) when paired with a port-multiplying SATA controller, so both drives can be used independent of one another.
Maximize file transfer speeds
The dual SSD adapter lets you utilize the full potential of your SATA III controller. Using M.2 SSDs in place of a platter drive reduces your data transfer bottlenecks and gives you file transfer speeds of up to 6 Gbps. M.2 SSDs also save you money by reducing your power consumption over regular platter drives.
The M.2 NGFF SATA RAID adapter also provides TRIM support to enhance the stability and performance of your M.2 NGFF SSDs.
Applications
Install two M.2 NGFF SSDs into a 2.5” bay to create high-performance storage with configurable RAID
Add data redundancy to your system, by adding a mirrored SSD (RAID 1).
Increase the storage capacity of your system by adding an additional SSD in a RAID array (RAID 0/BIG).
Turn two unused M.2 drives into a regular 2.5in SATA solid-state drive.
Retrieve/backup data from an M.2 (NGFF) drive using a standard SATA computer.
Use M.2 drives in any 2.5 in. SATA application.
StarTech Packaging
Look for StarTech branded packaging to ensure you are getting a genuine StarTech product.
What's in the Box
1 - dual M.2 NGFF SATA RAID adapter.
2 - M.2 drive mount hardware.
4 - screws.
1 - mini screwdriver.
1 - quick start guide.
Features
- Install two M.2 NGFF SSDs into a single 2.5” SATA bay and build a powerful RAID array
- Supports RAID 0, RAID 1, spanning, or JBOD
- Add M.2 SSD performance to any computer system by converting M.2 to SATA
- Protect your M.2 (NGFF) SSDs in any 2.5in application with enclosed housing
- Supports TRIM to help ensure stable performance of your M.2 SSDs
- Supports SATA I/II/III (up to 6Gbps)
- 2.5in SATA form factor housing
- Broad compatibility with support for the most common SATA M.2 SSDs (2230, 2242, 2260, 2280)
knuxyl
Comentado en los Estados Unidos el 7 de enero de 2025
I am using 2x2TB WD Blue SATA devices set to Raid 0. Bios sees 4TB disk with the raid controller as the device name. Everything seems to work except TRIM. With discard in /etc/fstab the kernel log spams "DATA_SET_MANAGEMENT" errors, basically saying TRIM is not supported. I do not suspect this controller though, I am using an N5105 router mini pc from aliexpress with an elmer's glued-together bios. After removing discard from my fstab the device is working perfectly fine. I expect TRIM to work fine on a regular computer. If you have an aliexpress frankenstein machine, expect TRIM to not work. The case is great quality which is the main reason I got this. I figured I'd have some kind of issue and the lack of TRIM is acceptable for me.
Degand
Comentado en Francia el 7 de noviembre de 2024
Installé avec 2 NVMe de 2To en RAID1, me voilà rassuré sur la conservation de mes données, simple à mettre en œuvre le boitier au format 2.5" sur un support d'adaptation 3.5" remplace 1 HD 3.5" de 1To
#Psousamendes
Comentado en España el 11 de septiembre de 2024
Andava á muito tempo á procura disto e finalmente encontrei. É caro mas vale a pena.
Curtis Bowden
Comentado en el Reino Unido el 11 de octubre de 2023
Obviously limited by SATA speeds but works straight out the box. Can't complain, doesn't get too hot either, unsure if the other reviewers have a different batch.Perhaps a little pricey, but has lasted well in my system the last few months with 24/7 usage.
gullo
Comentado en Italia el 30 de enero de 2020
Premettendo che fa quello che dice è bene analizzare come va impostato perché non è intuitivo.L'adattatore può essere configurato in questa maniera:JBOD: prima di utilizzarlo come raid (0 o 1) va impostato in questa maniera e va inserito e formattato un ssd alla volta nel proprio slot. Il pc (W7 che ho usato io) non li riconosce se sono installati entrambi ma vede solo quello nello slot 1, quello dello slot 2 non viene visualizzato. Quindi questa funzione che viene definita JBOD non funziona come dovrebbe ma serve solo a inizializzare gli ssd.SPAN: una volta inizializzati si può impostare questa funzione per: usare singolarmente gli ssd (verrà chiesto di riformattare quello nello slot 2) e quindi si vedranno 2 unità da risorse del pc (quindi come JBOD) o tramite gestione del disco potrà essere inizializzato come singola unità con capacità sommata dei due ssd e in questo caso si vedrà una sola unità (SPAN). Attenzione perché se si usa una come unità sommata se uno dei due ssd viene rimosso e poi reinserito verrà formattato e si perderanno quindi metà dei dati.RAID 0: si imposta e si formattano i dischi, nulla di particolare.RAID 1: i led devono lampeggiare per un bel po finché non smettono, a quel punto è impostato.
Julio Pedroza
Comentado en México el 4 de enero de 2019
Lo compre y lo tengo funcionando en raid 0, ya tengo 6 meses y no he tenido ningun problema, mi windows si mejoro su velocidad.
Productos recomendados
Mex $3,450.46
Mex $ 1,449 .00 Mex $1,449.00